Petro Chemical Equipment
Stock No.:
10715039IN STOCK AND NEW- Paul O. Abbe Model RB-135 Ribbon Blender.
NEW & IN STOCK- Paul O. Abbe Model RB-135 Ribbon Blender. In -Stock .135 Cubic Foot working capacity. 146 Cubic Foot total volume. Type 304 stainless steel polished. Food grade. All stainless steel construction. Trough dimensions: Approximately 49.6" wide x 105.5" long x 53.6" deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 40 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 33 rpm. Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 30" wide x 50" long. Approximate 4.7" wide x 19.7" flush air operated plug valve. Discharge housing is approximate 20.5" wide x 28.4" long. Approximately 8" discharge height. Approximate weight 7,920 pounds. Approximate overall dimensions: 64.8" wide x 158.3" long x 84.7" high. Controls are available upon request.
MFR: Paul O Abbe
Stock No.:
53179001Used Alfa Laval M10-MFG Plate Heat Exchanger – 137.3 Sq. Ft., 100 PSI, Stainless Steel
Used- Alfa-Laval Plate Heat Exchanger, Model M10-MFG. 137.3 Square Feet. (58) 304 Stainless Steel plates, approximately 253mm (9.9") wide x 34" long x 0.40mm thick plates. Rated 100psi at -20 to 190 degrees F. Mounted in expandable frame with (3) legs. Serial# 30105-61105.
MFR: Alfa Laval
Stock No.:
49941002Reconditioned Sharples P-3000 Decanter Centrifuge – 14x30 Bowl, 25 HP, 3180 G-Force, Vibration Monitor
Reconditioned Sharples P-3000 Decanter Centrifuge 14x30 Bowl, 25 HP, 3180 G-Force, Vibration Monitor. 4.25" conveyor pitch; painted steel frame and case; custom vapor seals; special scroll conveyor; floaters; ratio gearbox,; Metrix 5500 vibration switch; 25 HP Main drive motor; 10 HP back-drive motor; BeiJer Electronics Control Panel; steel platform. Reported to be reconditioned.
MFR: Sharples
Stock No.:
11252100Used Sharples Super-D-Canter Centrifuge. Model P-1000
Used- Alfa Laval / Sharples Super-D-Canter Centrifuge, Model P-1000. Stainless steel construction (product contact areas), conical bowl design, hard surfaced conveyor, base, casing, 20 hp main drive motor, feed pipe, vibration isolators, belt guard.
MFR: Sharples
Stock No.:
47049001Used Alfa Laval / Sharples P-3000 Super-D-Canter Centrifuge – 4,000 RPM, 28.5 HP
Used- Alfa Laval / Sharples P-3000 Super-D-Canter Centrifuge. 316 Stainless Steel construction (product contact areas), maximum bowl speed 4000 rpm, 4" double lead conveyor with welded hardfacing, hogged-out cake discharge ports with cake flingers, liquid plate dams, base, casing, gearbox with torque arm assembly, feed pipe, vibration isolators. Bowl driven by 28.5hp (21.3 kW), 460/3/60 main drive motor.
MFR: Sharples
Stock No.:
47049003Used Industrial Sharples P-3000 Super-D-Canter Centrifuge
Used- Alfa Laval / Sharples Model P-3000 Super-D-Canter Centrifuge. 316 Stainless Steel construction (product contact areas), maximum bowl speed 4000 rpm, 4" single lead conveyor with welded hardfacing, single row lined cake discharge with cake flingers, liquid plate dams, base, casing, gearbox with torque arm assembly, feed pipe, vibration isolators. Bowl driven by a 28.5hp (21.3kW), 3/60/460 volt, 1765 rpm main drive motor.
MFR: Sharples
Stock No.:
47876002Used Sharples P-3400HHS Super-D-Canter Centrifuge
Used- Alfa Laval / Sharples P-3400HHS Super-D-Canter Centrifuge, 316 Stainless Steel construction (product contact areas), maximum bowl speed 5000 rpm. Single lead conveyor, 360 degrees solids discharge ports with replaceable wear inserts, (missing liquid dam plates), base, casing, gearbox 95:1 ratio, feed pipe, DC Main drive motor, 15 hp DC backdrive motor. Mounted on approximate 4' stand with panel.
MFR: Sharples
Stock No.:
42467004Used Teledyne Readco Continuous Compounder Processor – 28" x 97" Barrel, 125 HP Motor
Used- Teledyne Readco Continuous Compounder Processor. Size approximately 28" diameter x 97" long barrel, Each screw is approx. 14" Diameter. stainless steel contact parts, non-jacketed. 15" x 26" feed section. 6" x 26" discharge section driven by a 125 HP Westinghouse electric motor 3/60/230/460 Volt, 1780 RPM, Dodge TXM gearbox ratio 20.55:1, final output 85 RPM. Includes a removable top cover.
MFR: Teledyne Readco
Stock No.:
43388003Used Dorr Oliver/Merco 16L Solid Bowl Decanter Centrifuge – 4,000 RPM
Used- Dorr Oliver/Merco 16L Solid Bowl Decanter Centrifuge. 316 Stainless steel construction (product contact area), maximum bowl speed 4000 rpm, 5" double lead conveyor with welded hardfacing, auger style solids discharge, plate dam liquid discharge, base, discharge chutes, bowl cover, 30hp drive motor , ECB backdrive, belt guard.
MFR: Dorr Oliver/Merco
Stock No.:
43388004Used Dorr Oliver/Merco 16L Decanter Centrifuge
Used- Dorr Oliver/Merco 16L Decanter Centrifuge, maximum bowl speed 4000 rpm. 5" double lead conveyor with welded hardfacing, auger style solids discharge, plate dam liquid discharge, base, discharge chutes, bowl cover, 30hp drive motor , ECB backdrive, belt guard, With Solid Bowl. 316 Stainless steel construction (product contact area)
MFR: Dorr Oliver/Merco
Stock No.:
43912001Used Dorr Oliver 16L Stainless steel Decanter Centrifuge
Used- Dorr Oliver 16L Solid Bowl Decanter Centrifuge. 316 Stainless Steel construction (product contact areas), maximum bowl speed 4000 rpm, 5" double lead conveyor with welded hardfacing, auger design solid discharge ports, adjustable liquid plate dams, coffin design stainless steel casing, cyclo gearbox, base, main drive guard. serial# CH34311SN10MC8.
MFR: Dorr Oliver