Packaging Equipment

ATM Delaval 20 x14 Perforated Basket Centrifuge

Used- ATM De Laval 20 x14 Perforated Basket Centrifuge, 316 Stainless Steel contact parts. 28" diameter x 19-1/2" deep chamber. 20" diameter x 14" deep perforated basket, with approximately 1/8" diameter holes. Hinge top cover with (2) 4" sight glass, 2", 1", 4" side bottom outlet. Includes hydraulic pack driven by a 5hp 3/60/575 volt, 1700 rpm motor. Serial# 69657.

MFR: ATM

Used Patterson-Kelley 20 cu. ft. Stainless Steel Twin Shell “V” Blender | 3 HP Drive | Platform & Safety Fencing | Good Condition

Used Patterson-Kelley 20 cu. ft. Stainless Steel Twin Shell V" Blender | 3 HP Drive | Platform & Safety Fencing | Good Condition. The blender is chain and sprocket driven by 3 hp electric motor. The blender is designed to handle material density of up to 105 lbs/cuft. The two shells measure about 31" diameter x 53" long. This unit is set up for an intensifier bar belt driven by a 5 hp motor. THE BAR ITSELF IS MISSING. There is a 7.5" discharge with a pneumatically operated butterfly valve. Overall dimensions with carbon steel stand are 116" wide x 68" deep x 112" tall. Serial # 234005. This unit comes with fence panels for a safety and a platform with a stairway. The platform is 103" wide x 83" deep x 48.5" tall to the floor. OAD of the platform with stairway are 103" w x 112" long x 91" h. Requires 230/460 vac 3 ph electrial supply. Good condition.

MFR: Patterson Kelley

Used Toshin TDS75-100MF Double Arm Dispersion Mixer – 75L Capacity, 100 HP, Stainless Steel. Chewing Gum.

Used- Toshin Double Arm Dispersion Mixer, Model TDS75-100MF, Stainless Steel. 75 Liter (19.8 gallon) working capacity, 150 liter (39.6 gallon) total. Jacketed bowl approximate 22" left to right x 23" front to back x approximately 20" deep rated 213 maximum psi at 302 degrees F. Cored masticator blades, front rotor 27 rpm, rear rotor 23 rpm, geared one end, top air operated pressure cap, air operated dust hood, motorized bowl screw tilt with a 2.2kw motor. Mixer driven by a 75kw (100hp), 3/60/480 volt, 1760 rpm motor thru a reducer no ratio. Includes an operator panel and control panel. Mounted on a base. Serial # 916. For Chewing Gum.

MFR: Toshin

Used Toshin Co. Double Arm Mixer / Hybrid Kneader - Dispersion Mixer – 75L, 100 HP, Stainless Steel. Chewing Gum.

Used- Toshin Model TDS75-100MF Double Arm Dispersion Mixer, Stainless Steel. 75 Liter (19.8 gallon) working capacity, 150 liter (39.6 gallon) total. Jacketed bowl approximate 22" left to right x 23" front to back x approximately 20" deep rated 213 maximum psi at 302 degrees F. Cored masticator blades, front 27 rpm, rear 23 rpm, geared one end, top air operated pressure cap, air operated dust hood, motorized bowl screw tilt with a 2.2kw motor. Mixer driven by a 75 kw (100 hp), 3/60/480 volt, 1760 rpm motor thru a reducer ratio 20.272 to 1. Includes an operator panel and control panel. Mounted on a base. Serial # 1298. For Chewing Gum.

MFR: Toshin

Used Howard 200 Gallon Double Arm Mixer – 304 Stainless Steel, Hydraulic Tilt

Used- Howard Double Arm Mixer, Approximate 200 Gallon, 304 Stainless Steel. Non-jacketed bowl approximate 50" left to right x 44-1/8" front to back x 34-1/2" deep. Overlapping sigma blades set up for hydraulic drive, no power pack. Dual ram hydraulic tilt, top safety grate. Mounted on a stainless steel frame. Serial# H3649-2, built 2001.

MFR: Howard

Used Industrial Ribbon Blender, 200 Cubic Foot, Stainless Steel, 50 HP with Rotary Valve

Used Stainless Steel Double Spiral Ribbon Blender. Approximate 200 cubic foot capacity. Has top cover and (2) bag dump stations. 50 HP motor & reducer. Center bottom outlet with rotary valve.

Ross Model HDM 200 Double Planetary 200 Gallon Mixer

Used- Ross Double Planetary Mixer, Model HDM 200. 30-200 Gallon working capacity. (2) Carbon Steel Stirrers approximate orbital speed 24 rpm, stirrer speed 26 rpm. Top dust hood with charge port, bottom fume hood, hydraulic lift with power pack. Includes (1) 44'' diameter x 33-3/4'' deep can. Driven an 40 HP, 3/60/460 VOLT, 1740 rpm XP motor, thru Delroyd model HV120 reduction gear, 74.21 to 1 ratio. Mounted on an I beam frame. Serial# 35555. Additional mix cans available for purchase at additional cost, subject to availability.

MFR: Charles Ross

Used Werner & Pfleiderer UK17 Double Arm Mixer – 200 Gal, Stainless Steel Clad, Jacketed

Used- Werner & Pfleiderer Double Arm Mixer, Model UK17, Stainless Steel Clad 200 Gallon. Sigma tangential blades, jacketed bowl (bottom only) 43" front-back x 53" left-right x approximately 36" deep. Geared both ends. Set up for hydraulic tilt 7.5 hp, 220/440V, 1750 rpm. No base, no drive. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Werner & Pfleiderer

Used Groen Inclined Agitated Kettle, 250 Gallon | Model INA-250 | 316 SS | Jacketed | 5 HP Agitator

Used Groen Inclined Agitated Kettle, 250 Gallon | Model INA-250 | 316 SS | Jacketed | 5 HP Agitator, Vertical. Approximately 54" middle diameter x 45" deep. Full jacket, upper jacket rated 40 PSI, lower jacket rated 100 PSI at 338F. Agitator driven by a 5hp 3/60/208-230/460v 1740 rpm motor. Mounted on 4 carbon steel legs. National Board #104598. Serial #104598.

MFR: Groen

Used Hamilton 200-Gallon Stainless Steel Agitated Kettle – 120 PSI Jacket

Used- Hamilton 200 Gallon Agitated Kettle, stainless steel construction with 3/4 jacket, rated for 120 PSI at 342 degrees F. Features top mounted full sweep agitator, currently less drive. Hinged lid top covers. Hemispherical bottom with 2-1/2" diameter center bottom outlet.

MFR: Hamilton

Used AB Process / JBT Mixing System | 200 Gallon Jacketed Skid-Mounted Mixer

Used AB Process / JBT Mixing System | 200 Gallon Jacketed Skid-Mounted Mixer. Jacket rated 150 PSI at 366 degrees F. 36" straight side x 41" diameter tank dimensions, cone bottom. Scrape agitator. 15 HP SPX product pump. On Mettler Toledo load cells. Mounted on skid Built 2018.

MFR: JBT Foodtech

Hamilton 200 Gallon Triple Motion Stainless Steel Kettle

Used- Hamilton 200 Gallon Triple Motion Stainless Steel Kettle. 48" dia x 36" deep. Hemispherical bottom. Side/bottom scrape triple agitation with pivoting bridge. Jacket rated 125 PSI @ 345 Deg F. 5HP drive, 3/50/60/230/460V. Split stainless lids. 3" Tri-Clamp discharge fitting. Serial# 2475, National Board# A8223. Last used in food.

MFR: Hamilton