Confectionary Equipment

Unused 12,700 Gallon Crown Iron Works 316L Stainless Steel Vertical Storage & Process Vessel

Unused 12,700 Gallon Crown Iron Works 316L Stainless Steel Vertical Storage & Process Vessel.12' diameter x 11'8" straight side. 19'2" Overall Height. Rated 15FV psi @ 250?F. Lug/Leg Supports. Dished Heads. 1/4" Thick Shell Wall. 20" top manway, bottom 4" center bottom outlet.

MFR: Crown Iron Works

13 Gallon (50 Liter) Agi-Mixer Triple Motion Greerco Jacketed Vacuum Kettle

13 Gallon (50 Liter) Agi-Mixer Triple Motion Greerco Jacketed Vacuum Kettle. 316 Stainless Steel. Has counter rotating sweep mixer with scrapers and high shear mixer. Internal rated Full Vacuum. Jacket rated 40 PSI @ 300 Deg.F..Top Drive motor Disconnected for removal. Test results: The previous owner reports that all components of the homogenizer are fully functional. Fully tested with H2O. The homogenizer and inner and outer paddles work as do their RPM meters. The cover lifting hydraulics is fully functional. The cover lift mechanism is functional as well as the homogenizer and the two blades. The jacket was pressure tested and vessel was vacuum tested - no leaks. The chart recorder is out of service as well as the hour meter. The light bulb that gave me trouble in the video was replaced.Note: The outer paddles must be jogged to index, (amber light), before the cover will open. The limit switch with long arm to contact tank, must be in the correct position for lifting and for paddle operation. Last used in sanitary cosmetics facility. Video of unit running available.

MFR: J C Pardo & Sons

Used Fryma VME-50/C Vacuum Paste/Cream Mixer – 50L, 316 SS, Jacketed

Used- Fryma Vacuum Paste/Cream Mixer, Model VME-50/C. 50 liter (13 gallon) maximum working capacity. 90 liter (24 gallon) total capacity, 43.5 PSI Double Jacket Working Pressure, 316 Stainless Steel Construction. Includes: Vacuum pump driven by 1.5 HP Motor. 480V/3/60Hz.

MFR: Fryma

Alfa Laval NX-314 Solid Bowl Decanter Centrifuge

Used- Alfa Laval NX-314 Solid Bowl Decanter Centrifuge. Max bowl speed 3250 rpm, 316 stainless steel (product contact areas), base, casing, feed pipe, gearbox, main drive motor, safety guards, vibration switch, mounted on four leg stand.

MFR: Alfa Laval

Used JV Northwest 1,300-Gallon Single-Wall Tank – 316 Stainless Steel

Used- JV Northwest Single-Wall Tank, 1,300-gallon. Constructed of 316 stainless steel. 78" diameter x 60" straight side; flat top, dish bottom design; Bottom head includes a 2" diameter center bottom outlet; Top ports include (1) 2" diameter tri-clamp fitting; Tank is mounted on (4) stainless steel legs and includes a bridge mount for agitation or other top-mounted equipment; Shell Thickness: 2.3mm/0.090 inches. Previously used in cosmetics applications.

MFR: JV Northwest

Used Approx. 13,000 Gallon Pittsburgh Tank Corporation Carbon Steel Vertical Mix Tank

Used- Approx. 13,000 Gallon Pittsburgh Tank Corporation Carbon Steel Vertical Mix Tank. Flat top and bottom. 11-6" diameter X 17 high straight side. Has side bottom manway. Has (4) internal baffles. Has stainless steel (4) blade agitator, driven through Chemineer Drive. Insulated and covered with sheathing. Includes ladder with safety cage and top handrail.

MFR: Pittsburgh-Des Moines

Used ER Manufacturing 13,200 Gallon Vertical Carbon Steel Storage Tank with Cone Bottom

Used ER Manufacturing 13,200 Gallon Vertical Carbon Steel Storage Tank with Cone Bottom. 13,200 gallon/50 cubic meter capacity. 9'3" diameter x 36' overall height. 24" x 36" side manway. 8" center bottom outlet port. 6" internal feed line. Cone bottom. With removable caged ladder. On (4) leg frame.

MFR: ER

J.H. Day 135 Cu Ft Ribbon Blender, Stainless Steel, (2) Bag Dump Stations, XP Motor

Used J.H. Day Stainless Steel Double Spiral Ribbon Blender, Approximate 135 Cuft. With top cover and (2) bag dump stations. 30 HP XP motor & reducer, center bottom outlet with valve. Serial# 85051.

Used Alfa Laval M10-MFG Plate Heat Exchanger – 137.3 Sq. Ft., 100 PSI, Stainless Steel

Used- Alfa-Laval Plate Heat Exchanger, Model M10-MFG. 137.3 Square Feet. (58) 304 Stainless Steel plates, approximately 253mm (9.9") wide x 34" long x 0.40mm thick plates. Rated 100psi at -20 to 190 degrees F. Mounted in expandable frame with (3) legs. Serial# 30105-61105.

MFR: Alfa Laval

Used Lot of (7) Paul Mueller Dimple Jacket Heat Transfer Plates – Stainless Steel | 14.34 ft² Each | 50 PSI @ 350°F

Used- Lot of (7) Paul Mueller Company Heat Transfer Plates. Dimple jacket style; Made from stainless steel or higher alloy; Approximate OAD: 59" X 39" +2.5" for connection ports X 1" thick; Jacket area dimensions: 54" X 35", or 14.34 square feet per plate; Designed for 50 PSI/F.V. @350; NB registered. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Paul Mueller

Used 140 Cu Ft Dual Shaft Ribbon Blender – Stainless Steel Industrial Mixer

Used Dual Shaft Ribbon Blender, Approximately 140 cuft / 1100 Gallon capacity. Stainless steel. Dimple Jacket. Bottom Discharge: (2) 10" ports, one for each screw, Trough dimensions: Length: 119 inches Height: 46 inches Width: 47 inches. Height off ground: 12 inches Bottom discharge. (2) 575 Volt, 15 HP motors. (Motors will be switched out to (2) Used US voltage Motors;

Installed but Unused- Southern Heat Exchanger Shell & Tube Heat Exchanger, 140.

Unused, Installed and removed. Southern Heat Exchanger Shell & Tube Heat Exchanger, 140.4 Square Foot, Carbon Steel, Horizontal. Carbon steel shell rated 700 psi/ full vacuum at -20 to 300 degrees F. (61) Carbon steel 3/4" diameter x 12' long x 12 gauge straight tubes rated 198 psi / full vacuum at -20 to 400 degrees F. Openings: shell side (4) 2", tube side (2) 2". Saddle mounted. Serial# 01-041, National Board# 10959, Built 2001. Wt. 2,100#.

MFR: Southern Heat Exchanger