Confectionary Equipment

Used Fanuc M-900iA/350 6-Axis Robot – 770 lb Payload, R-30iA Controller

Used- Fanuc M-900iA/350 w/ R-30iA Control System and Learning Pendant. Uses Handling Tool Ver 7.3 software. Capable of up to 770 lbs payload with a horizontal reach of up to 104.3in. Up to 6-axes of motion. 3/60/480V.

MFR: Fanuc

Used Fanuc M-200iD/7L 6-Axis Robot – 7kg Payload, R-30iB Controller, 911mm Reach

Used- Fanuc Articulating 6-Axis Robot, Model M-200iD/7L. Rated for up to a 7kg payload with a horizontal reach up to 911mm. Includes Fanuc i-Pendant controller, and Fanuc R-30iB control system. Has appx 1800 running hours. Built 2018. 3/60/230V.

MFR: Fanuc

2. Pre-Owned Federal Model 188R Rotary Filler and Capper – Last Running 16oz Juice

Used- Federal Model 188R 18 Valve Filler With 8 Head Capper. Set for 38mm caps. Last ran juice, 16 oz. 3/4" diameter valves set on 5 3/8" centers. Left to right clockwise direction. Allen Bradley Flex VFD speed controller. Elec: 3/60/230V.

MFR: Federal

2. Pre-Owned Federal GWS185L Rotary Filler Capper – For 1-Gallon Water Bottles

Used- Federal 18 Valve Filler With 5 Head Snap Cap Capper, Model GWS185L Last running 1 gallon water products with 38mm nap caps. 1" dia valves on 6.75" centers. Right to left counter clockwise direction. Manual filler and cap height adjustment. Container back up photo eye detection. Panel View operator interface, Allen Bradley MicroLogix 1200 PLC Controls. Elec: 1/60/220 Volt.

MFR: Federal

Used 2019 Nordson G4V 3-Axis Fluid Dispensing Robot

Used- 2019 Nordson Robot G4V 3 Axis Automated Fluid Dispensing System 7362739 w/ attachments Serial Number: 0005631 Make: Nordson EFD Model Robot Enclosure w/ Attachments. (1) 2019 Nordson Robot G4V 3 Axis Automated Fluid Dispensing System 7362739 w/ attachments Serial Number: 0005633 Make: Nordson EFD Model Robot Enclosure w/ Attachments

MFR: Nordson

GEA Westfalia SA7-06-076 Desludger Disc Centrifuge. Used.

Used-GEA Westfalia SA7-06-076 Desludger Disc Centrifuge, 316 stainless steel construction (product contact areas), maximum bowl speed 8400 rpm, clarifier design (liquid/solids separation), centripetal pump liquid discharge, direct drive, by an approximate 6.6 hp drive motor, control panel. Frame mounted. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible

MFR: GEA Westfalia

Used General Packaging Model 80WA2P Vertical Form Fill & Seal Machine | 1.25–10” Bags | 17” Web | Spice Packaging Line

Used General Packaging Model 80WA2P Vertical Form Fill & Seal Machine | 1.2510" Bags | 17" Web | Spice Packaging Line. Includes All-Fill auger filler, top-mounted. Bag size range: 1.25" - 10" Width x 2.5" - 15" Length. Machine features an 11" wide heat seal jaw, a 16" tall fin seal, a 17" wide maximum film web width, and a 3" diameter product port. Last used in spice filling operation with auger filler (Filler not included). 10 amps. 3/60/208V main power, 1/60,115 controls (requires 2 feeds). 3/60/240V.

MFR: General

Used Graco Thermo-O-Flow 20 Heated Pail Unloader – 5 Gallon Capacity

Used- Graco Thermo-O-Flow 20 Air-Powered Ram Heated Pail Unloader. 5 Gallon (20 liter) pail size. Approximate 3" (76mm) diameter dual post ram. Approximate maximum melt rate 0.6 kg/min (1.3lb/min), maximum flow rate 4 kg/min (9 lb/min). Includes Graco President Air motor, heated application hose, pneumatic pump lift, and controls set on a floor-mountable stand. Built 2006. 1/60/240V. Last running adhesive/sealant application. Not equipped with discharge nozzle/gun. Built 2006.

MFR: Graco

Used Graco Thermo-O-Flow 20 Hot Melt Pail Unloader – Adhesive & Sealant System

Used- Graco 5 Gallon (20 liter) Pail Size Thermo-O-Flow 20 Air-Powered Ram Heated Pail Unloader. Approximate 3" (76mm) diameter dual post ram. Approximate maximum melt rate 0.6 kg/min (1.3lb/min), maximum flow rate 4 kg/min (9 lb/min). Includes Graco President Air motor, heated application hose, pneumatic pump lift, and controls set on a floor-mountable stand. 1/60/240V. Last running adhesive/sealant application. Not equipped with discharge nozzle/gun. Built 2006.

MFR: Graco

Pre-Owned TU25 M Metal Tube Filling Machine – Up to 40 Tubes per Minute

Used Gustav Obermyer TU25 M Metal Tube Filler. Capable of speeds up to 40 Tubes per minute (depending on fill size and application). Tube size range (with changeparts): 9mm - 50mm (diameter) x 60mm - 240mm (height). Filling volumes: 5ml 250ml. Set up for a #2 fold. Built 2017.

Hayssen Ultima VFFS with Powder Auger & Markem Date Coder – Coffee Packaging Line

Used- Hayssen Model Ultima CMB Coffee MAX Vertical Form Fill and Seal Machine with All-Fill Model Powder Auger Filler. Capable of speeds up to 40-60 pouches per minute (depending on product and pouch size). maximum pouch size: 8" (width) x 12" (length) Equipped with 12.5" tall vertical sealer & 9" wide cross seal jaws. Includes Markem date coder.

MFR: Hayssen

Used Hayssen Ultima ST 12-16HR Vertical Form Fill Seal Machine with Spee-Dee Aug

Used- Hayssen Ultima Model ST 12-16HR Vertical Form FIll Seal with Spee Dee Auger Filler. Capable of speeds up to 60 BPM (Depending on application). Has a bag size range:(Width) 2 1/8"-12" x (length) 3"-16". Has Spee-Dee Servotronic 3500S auger filler, Markem smart date thermal coders, safeline drop through metal detector. Has film registration, Allen Bradley PLC Controls, Allen Bradley Panel View 1000 HMI.

MFR: Hayssen