Confectionary Equipment

https://images.aaronequipment.com/ItemImages/Mills/Sand-Media/52038005_aa.jpg

Stock No.:

52038005

Used Union Process Attritor - Ceramic Lined, 3 HP XP Motor

Used- Union Process Szegvari Attritor. Approximate 8" diameter x 7-1/2" deep ceramic lined jacketed bowl. Mixing agitator approximate 1" diameter shaft, with (4) 1/2" diameter posts. Driven by reeves variable speed motodrive with 3hp, 3/60/230/460 volt, 1170 rpm XP motor. Mounted on carbon steel frame. no manufacturers tag.

https://images.aaronequipment.com/ItemImages/Mills/Sand-Media/1-S_52038007_aa.jpg

Stock No.:

52038007

Used - Union Process Szegvari 1-S Series Laboratory Attritor, 1.5 Gallon Tank

Used- Union Process Szegvari 1-S Series Laboratory Attritor. Tank capacity 1.5 gallon, working capacity 0.8 gallons. Media volume 1.0 gallons. 7-1/2" diameter x 9" deep bowl, 1" diameter shaft. Driven by a 1/2hp, 3/60/208-220/440 volt, 1800 rpm, ratio 14/1, thru varidrive variable speed gearbox. Frame mounted.

https://images.aaronequipment.com/ItemImages/Mills/Sand-Media/1SDG_52038008_aa.jpg

Stock No.:

52038008

Used Union Process 1-SDG Attritor - 3 HP XP Motor, 3/230/460V

Used- Union Process Szegvari 1-S Series Laboratory Attritor, Model 1SDG. Tank capacity 1.5 gallon, working capacity 0.8 gallons. Media volume 1.0 gallons. Jacket tank approximate 7-1/2" diameter x 7-1/4" deep, 1" diamater shaft with 1/2" posts. Driven by a 3hp, 3/230/460 volt, 1170 rpm xp motor, thru Reeves adjustable speed gearbox. Mounted on painted carbon steel frame. Serial# 891103.

https://images.aaronequipment.com/ItemImages/Mills/Sand-Media/1-S_52038009_aa.jpg

Stock No.:

52038009

Used Szegvari Lab Attritor - 8” Dia x 8.25” Deep Jacketed Bowl

Used- Union Process 1-S Series , Type B Laboratory Attritor. Tank capacity 1.5 gallon, working capacity 0.8 gallons. Media volume 1.0 gallons. Jacket tank approximate 8" diameter x 8-1/4" deep. Missing agitation shaft. Driven by a 3hp, 3/208-230/460 volt, 1725 rpm xp motor, thru Reeves adjustable speed gearbox. Mounted on painted carbon steel frame.

https://images.aaronequipment.com/ItemImages/Compressors/Compressor-Air-Dryer/Sullair-C-250-460-3-60-A_51817004_aa.jpeg

Stock No.:

51817004

Used Sullair RC-250-460-3-60-A Refrigerated Air Dryer – 250 SCFM

Used- Sullair Model RC-250-460-3-60-A Refrigerated Air Compressed Dryer. 250 Scfm. Maximum air pressure 230 PSIG at maximum air inlet temperature 150 degrees F. R134a refrigerant, 35 ounces. Compressor driven by a 1.77hp, 3/60/208-230/460 volt, 3155 rpm motor. Fan driven by .39HP. Serial#1412SA01020. 3/60/460 Volt.

MFR: Sullair

https://images.aaronequipment.com/ItemImages/Mixers/Double-Cone-V-Mixers/Patterson-Kelley_49927002_ab.jpg

Stock No.:

49927002

Used Patterson-Kelley Twin Shell Dry Blender – 10 Cu. Ft., Stainless Steel, 1.5 HP Motor

Used- Patterson Kelley Twin Shell Dry Blender, 10 Cubic Feet, Stainless Steel. Maximum material density 90-Lb / cu. ft. Driven by a 1.5 HP, 3/60/575 volt, 1735 rpm gear motor, 21.32/1 ratio. 8" Diameter center bottom outlet. Mounted on a stand. Serial# 27643.

MFR: Patterson Kelley

https://images.aaronequipment.com/ItemImages/Mixers/Double-Cone-V-Mixers/Patterson-Kelley_53027001_aa.jpg

Stock No.:

53027001

Used Patterson-Kelley 10 Cu Ft Double Cone Vacuum Dryer – Stainless Steel, Gear Motor, On Stands

Used- Patterson-Kelley Double Cone Vacuum Dryer, 10 Cubic Feet Working Capacity, Stainless steel construction, Maximum material density 125 pounds a cubic foot. Top port, bottom outlet with valve. Shell driven by an approximate 1/2hp gear motor. Mounted on stands. Sold as is, no jacket ratings.

MFR: Patterson Kelley

https://images.aaronequipment.com/ItemImages/Mills/Hammer-Mill/Sturtevant-3B_52283014_aa.jpg

Stock No.:

52283014

Sturtevant Model 3B Simpactor Mill, 16" Diameter.

Used- Sturtevant Model 3B 16" Diameter Simpactor Mill. Carbon steel construction. Approximate capacity 3.5 tons per hour, depending on product. Set up with 6" x 6" flanged inlet with 6" diameter center bottom discharge. Includes 2-part rotating discs, driven by 10 HP inverter motor, rated for 230/460V, 3-phase, 60 Hz, 3425 RPM. Includes v-belt drive with guard. Serial# 504.

MFR: Sturtevant

https://images.aaronequipment.com/ItemImages/Kettles/Stainless-Steel-0-499-Gallon/Groen-TDH-40_53043001_aa.jpg

Stock No.:

53043001

Used Groen TDH-40 Table Top Kettle – 40 Quart, Gas-Heated, Steam Jacketed

Used- Groen Table Top Kettle, Model TDH-40, 40 Quart Capacity, Stainless Steel. Approximate 16-1/2" diameter x 14" deep. Self-contained steam jacketed unit with natural gas heated steam source contained within unit. Input rated 52,000 btu / hr. 2/3 bottom jacket rate 50 psi at 300 degrees F. Manual tilting with pour lip. Mounted on a base. National Board# 12100, Serial# 1988-10.

MFR: Groen

https://images.aaronequipment.com/ItemImages/Kettles/Stainless-Steel-0-499-Gallon/Groen-TDH-40_53043002_aa.jpg

Stock No.:

53043002

Commercial Tabletop Kettle for Sale – Groen TDH-40, Natural Gas Heated

Used- Groen Model TDH-40 Table Top Kettle, 40 Quart Capacity, Stainless Steel. Approximate 16-1/2" diameter x 14" deep. Self-contained steam jacketed unit with natural gas heated steam source contained within unit. Input rated 52,000 btu / hr. 2/3 bottom jacket rate 50 psi at 300 degrees F. Manual tilting with pour lip. Mounted on a base. National Board# 13816, Serial# 1989-4. 1/60/110 Volt.

MFR: Groen

https://images.aaronequipment.com/ItemImages/Kettles/Stainless-Steel-0-499-Gallon/Groen-TDH-40-SP_53043004_aa.jpg

Stock No.:

53043004

Commercial Stainless Steel Groen TDH-40 Kettle – 40 Qt, Self-Contained Steam

Used- Groen Stainless Steel Table Top Kettle, Model TDH/40-SP, 40 Quart Capacity. Approximate 16-1/2" diameter x 14" deep. Self-contained steam jacketed unit with natural gas heated steam source contained within unit. Input rated 52,000 btu / hr. 2/3 bottom jacket rate 50 psi at 300 degrees F. Manual tilting with pour lip. Mounted on a base. National Board# 32385, Serial# 32385. 1/60/110 Volt.

MFR: Groen

https://images.aaronequipment.com/ItemImages/Conveyors/Belt-Conveyors/SpanTech_51863001_aa.jpg

Stock No.:

51863001

Used Hytrol Belt Conveyor – 10" Wide x 518" Long | 5 Sections | .5 HP Motor | Carbon Steel Frame on Casters

Used- Hytrol Belt Conveyor. Approximate 10" wide x 518" long belt total. (5) Sections. Driven by a .5hp, 3/60/230/460 volt, 1740 rpm motor. Painted carbon steel frame with casters.

MFR: SpanTech

Sell Equipment

Have surplus equipment? We offer flexible options including direct purchase, consignment, or listing on our marketplace — all backed by trusted professionals.

Buy Used Equipment

Discover one of the world’s largest inventories of used processing and packaging equipment — ready to ship and backed by decades of industry expertise.

Auctions

Join global buyers and sellers at AIS-hosted auctions featuring top-quality surplus equipment from leading facilities around the world.