Confectionary Equipment
Stock No.:
52304001Groen DR1218 Scraped Surface Heat Exchanger/ Evaporator
Used- Groen Scraped Surface Heat Exchanger/ Evaporator, Model DR 1218, 304 Stainless Steel. Approximate heat surface area 9.5 square feet. Approximate 12" diameter x 18" long, with (3) scrapers. Internal rated 120 psi at 353 degrees F. Cover with 2-3/4" opening, 2" diameter outlet. Bottom driven by a 1hp, 3/60/230/460 volt, 1700rpm motor through a reducer. Includes a Waukesha size 3 pump, driven by a .75hp 3/60/230/460 volt, 1100rpm motor through reducer. Includes blower, and mounted control panel. Mounted on a stainless steel frame. Serial & National Board# 131204
MFR: Groen
Stock No.:
53458008Brew Tank, Model WP-30BBL. 30 BBL Capacity
Used- Brew Tank, Model WP-30BBL. 30 BBL Capacity, approximately 1700 gallons capacity. 304 Stainless Steel. Approximately 82" diameter x 66" straight side. Dished Top, Slight Cone Bottom. Openings Top: 20" manway, 4", 3", Side: 1-1/2", 1", (2) 1-1/2" side bottom, 2" center bottom outlet, with 9" discharge height. Mounted on (4) stainless steel legs. Serial# WP-498-30BBL.
Stock No.:
54110001Used Gulf Coast Exchanger Shell & Tube Heat Exchanger | 1733 Sq. Ft. | 300 PSI | U-Tube | 2017
Used Gulf Coast Exchanger Shell & Tube Heat Exchanger | 1733 Sq. Ft. | 300 PSI | U-Tube | 2017; SA-789 U-tube construction; SA-516-70 shell construction. 300 psig shell side design pressure; Full vacuum pressure; 390 psig shell side test pressure; 500 degrees F shell side design temp.; -20 degrees F shell MDMT; 1 pass shell side. 300 psig tube side design pressure; Full vacuum pressure; 390 psig tube side test pressure; 500 degrees F tube side design temp.; -20 degrees F MDMT; 2 pass tube side. (306) U-tubes .75" OD x approx. 13'3" straight length. OAD: 35.25" D x approx. 215.5" L. SN 824114, NB #103. Built 2017.
MFR: Gulf Coast Environmental
Stock No.:
52049004Installed but Unused Southern Heat Exchanger Shell & Tube Heat Exchanger – 1,761 Sq. Ft., Carbon Steel
Installed but Unused-Southern Heat Exchanger Shell & Tube Heat Exchanger, 1,761 Square Foot, Carbon Steel, Vertical. Carbon steel shell rated 413 psi / full vacuum at -20 to 650 degrees F. (789) Carbon steel 3/4" O.D. x 12' long x 12 gauge tubes rated 610 psi / full vacuum at -20 to 650 degrees F. Openings: shell side (2) 8". Side lug mounted. SHELL ONLY, NO HEADS. Serial# 8-00022, National Board# 13099, Built 2008.
MFR: Southern Heat Exchanger
Stock No.:
52038001Used - Paul O Abbe Ball Mill / Pebble Mill, Carbon Steel, 26 Gallon
Used- Paul O Abbe Ball Mill / Pebble Mill, Carbon Steel. Approximate 26 Gallon Total Volume. Jacket chamber approximate 18" diameter x 24-1/2" long. Driven by a 3hp, 3/220/440 volt motor. Rotary unions. Manhole cover. Mounted on a painted carbon steel frame.
Stock No.:
49886010Used FL Smidth 1860 Solid Bowl Decanter Centrifuge, Stainless steel
Used FL Smidth Incorporated Solid Bowl Decanter Centrifuge, Type NSOSTT12071, Model 1860-460-75, in stainless steel construction. Mid-size, high-throughput unit with 2,500 rpm maximum bowl speed and up to 60 gpm feed rate. Suitable for continuous liquid/solid separation in industrial slurries at up to approx. 60 gpm feed, such as food, chemical, mining/mineral, and wastewater streams, where stainless construction and mid-range throughput are required (subject to buyer validation). Includes feed pipe, 71:1 ratio gearbox, and 75 hp 3/60/460 volt, 1,765 rpm motor. Serial # 7959-2. Stainless construction broadens product compatibility, and the 75 hp drive delivers meaningful throughput and solids-handling capacity. Reported in good working condition; photos and inspection recommended. Broadly used in coal, iron ore, copper, gold, cement, coal preparation and potash and fertilizer minerals.
MFR: F L Smith
Stock No.:
49886011Used FL Smidth 1860-460-75 Stainless Steel Solid Bowl Decanter Centrifuge
Used- FL Smidth Decanter Machine Incorporated Solid Bowl Decanter Centrifuge, Type NSOSTT12071, Model 1860-460-75, Stainless Steel. Maximum 2500 rpm bowl speed, maximum feed 60 gallons per minute. Includes a feed pipe, 71 to 1 ratio gearbox, 75 hp, 3/60/460 volt, 1765 rpm motor. Serial # 7959-1. Broadly used in coal, iron ore, copper, gold, cement, coal preparation and potash and fertilizer minerals.
MFR: F L Smith
Stock No.:
54231003Used American Process Systems Ribbon Blender – Model DRB 18 (18 Cu Ft / 135 Gall
Used American Process Systems Ribbon Blender, Model DRB 18. 18 Cubic foot / 135 gallon Capacity. Approximately 60" long x 24" wide x 28" deep trough with hinged top cover. 2" Diameter shaft with welded ribbons. Outer ribbon is 1-1/2" wide x 7/16" thick, inner ribbon 2" wide x 3/16" thick. 6" Center bottom outlet with gate valve, 25" discharge height. Driven by a 5hp, 3/60/230/460 volt, 1758 rpm motor through reducer 10.15:1 ratio. Control panel with AB Powerflex 525 Drive. Mounted on (4) Carbon Steel legs. Serial# 1163
MFR: American Process Systems
Stock No.:
52862017Doyle and Roth Vacuum Cooler Condenser
Used- Doyle and Roth Vertical Shell and Tube Condenser, Approximate 18 Square Feet. Carbon steel shell rated 150psi / FV external at -20 to 300 degrees F. (50) 3/4" diameter x 24" long 316L Stainless Steel tubes rated 15 psi / FV at -20 to 350 degrees F. Baffle spacing 3.5". Single pass. Side lug mounted. National Board# 20757, Serial# S1998.
MFR: Doyle & Roth
Stock No.:
53267075Used Lundberg Carbon Steel Vertical Tank, Approx. 18,000 gallon capacity
Used- Lundberg Carbon Steel Vertical Tank, Approx. 18,000 gallon capacity. Slight cone top, flat bottom; 12 diameter X 22 high straight side; Multiple top fittings and side bottom outlets; 24" side bottom manway. Insulated and covered with sheathing. Includes ladder with safety cage. Built 2017. Previously stored 50% caustic.
Stock No.:
51258026Used 18,000 Gallon Reco Industries Vertical Stainless Steel Tank – Insulated Bulk Storage Vessel
Used 18,000 Gallon Reco Industries Vertical Stainless Steel Tank Insulated Bulk Storage Vessel. SA36 Stainless steel. Approximately 11' 6'' diameter x 24' tall. Insulated. Vertical.
MFR: Reco