Stock #
54590001
Used 1996 Nissei DC200-25ASE 220-ton Horizontal Hydraulic Two-Shot Injection Molding Machine. Factory hydraulic rotary platen for two-color, multi-material, overmolding, and insert molding applications. It features dual 25A injection units with 45 mm screws, 6.79 oz shot capacity per barrel, 25,260 psi maximum injection pressure, an N9G / NC9000G controller, and operates on 230/460V, 3 Phase, 60 Hz power. Included are a 2008 Yushin ATB-150S servo top-entry robot with controller, teach pendant, mounted robot, and safety guarding, providing a complete automated molding cell. Suitable for producing two-color, multi-material, overmolded, and insert-molded plastic components. Last used to make Custom coasters (2 separate colors molded into the same part).
Used Equipment Facts About This Machine
Manufacturer
Nissei Plastic Industrial Co., Ltd.
Product Overview
The Used Nissei DC200-25ASE 220-Ton Horizontal Hydraulic Two-Shot Injection Molding Machine is a fully integrated two-color molding system designed for multi-material, two-shot, overmolding, and insert molding applications. Built in 1996, this machine features a factory hydraulic rotary platen that allows sequential molding of two different materials or colors into a single finished component.
The machine is equipped with dual 25A injection units, each fitted with a 45 mm screw and providing approximately 6.79 oz shot capacity per barrel. With a maximum injection pressure of 25,260 PSI, the DC200-25ASE delivers the precision and repeatability required for demanding production environments.
Included with the press is a 2008 Yushin ATB-150S servo top-entry robot, complete with controller, teach pendant, mounted robot, and safety guarding, creating a complete automated molding cell ready for integration into production.
The system was last used to manufacture custom coasters utilizing two separate colors molded into a single part, demonstrating its capability for complex two-shot molding applications.
Note: This listing includes the Nissei injection molding machine, hydraulic rotary platen, Yushin ATB-150S robot, robot controller, teach pendant, mounted robot, and safety guarding. Mold tooling, temperature controllers, chillers, material dryers, and auxiliary equipment are included only if specifically stated.
Specifications
| Specification |
Details |
| Manufacturer |
Nissei Plastic Industrial Co., Ltd. |
| Model |
DC200-25ASE |
| Condition |
Used |
| Build Year |
1996 |
| Machine Type |
Horizontal Hydraulic Two-Shot Injection Molding Machine |
| Clamp Force |
220 Tons |
| Rotary Platen |
Factory Hydraulic Rotary Platen |
| Injection Units |
Dual 25A |
| Screw Diameter |
(2) 45 mm |
| Shot Capacity |
Approximately 6.79 oz per Barrel |
| Maximum Injection Pressure |
25,260 PSI |
| Controller |
N9G / NC9000G |
| Electrical |
230/460 Volt, 3 Phase, 60 Hz |
| Included Robot |
Yushin ATB-150S Servo Top-Entry Robot |
| Robot Build Year |
2008 |
| Robot Accessories |
Controller, Teach Pendant, Safety Guarding |
| Previous Application |
Two-Color Custom Plastic Coasters |
Features
- 220-ton hydraulic clamp
- Factory hydraulic rotary platen
- Two-shot injection molding capability
- Dual 25A injection units
- Two 45 mm screws
- Approximately 6.79 oz shot capacity per barrel
- Maximum injection pressure of 25,260 PSI
- N9G / NC9000G controller
- Supports two-color molding
- Supports multi-material molding
- Supports overmolding applications
- Supports insert molding
- Includes 2008 Yushin ATB-150S servo robot
- Complete robotic molding cell with safety guarding
- Previously used for two-color molded plastic products
Applications
The Nissei DC200-25ASE is commonly used for manufacturing:
- Two-color molded parts
- Multi-material plastic components
- Overmolded products
- Insert molded components
- Automotive parts
- Consumer products
- Medical components*
- Electrical housings
- Appliance components
- Promotional products
- Industrial plastic parts
- Precision molded components
*Subject to validation, tooling, and applicable regulatory requirements.
Common Industries
- Plastic injection molding
- Automotive manufacturing
- Consumer products
- Medical device manufacturing
- Electronics
- Industrial manufacturing
- Appliance manufacturing
- Packaging
- Promotional products
- Contract molding
- Custom injection molding
- OEM manufacturing
Products This Injection Molding Machine Is Used For
- Two-shot injection molding machines
- Two-color molding machines
- Rotary platen injection molding machines
- Horizontal injection molding presses
- Multi-material molding equipment
- Insert molding machines
- Overmolding systems
- Automated injection molding cells
- Plastic molding machines
- Hydraulic injection molding presses
- Robotic molding systems
- Industrial injection molding equipment
Frequently Asked Questions
What is the clamp force of this machine?
The Nissei DC200-25ASE features a 220-ton hydraulic clamping system.
What molding processes can this machine perform?
The factory hydraulic rotary platen allows for two-color molding, multi-material molding, overmolding, and insert molding applications.
What are the injection unit specifications?
The machine is equipped with dual 25A injection units, each with a 45 mm screw, 6.79 oz shot capacity, and 25,260 PSI maximum injection pressure.
Is a robot included?
Yes. The machine includes a 2008 Yushin ATB-150S servo top-entry robot, along with the robot controller, teach pendant, mounted robot, and safety guarding for automated part handling.
What was the machine previously producing?
The press was last used to manufacture custom coasters with two separate colors molded into a single finished part, demonstrating its two-shot molding capabilities.
Can Aaron Equipment assist with shipping and logistics?
Yes. Aaron Equipment can coordinate rigging, dismantling, export documentation, freight, and worldwide shipping logistics for injection molding machines, robots, and complete manufacturing cells.
