Your Files Are Being Processed
Please Wait
Contact Information
Phone: 630-350-2200
Toll Free: 1-800-49-AARON
Email: websales@aaronequipment.com
Used Shanklin Model F4A Continuous Motion Form Fill Seal with Static longitudinal seal and wire end seal. End seal dimensions are 6" X 16". (NOTE that this is the exact height and width of the end seal opening. Package dimensions would be slightly less) Package circumference cannot exceed 38". Delivery system is an 8'lugged/flighted infeed. Speed (by Shanklin Corp OEM) is rated at up to 75 ppm
Manufacturer | ShanklinShanklin |
Model | F4A |
Category | Packaging EquipmentPackaging Equipment |
Subcategory | Shrink Equipment - Horizontal Lap SealersShrink Equipment - Horizontal Lap Sealers |
Manufacturer: Shanklin (Sealed Air Corporation)
Model: F4A
System Type: Continuous Motion Form-Fill-Seal Lap Shrink Wrapper
Delivery System: 8' Lugged / Flighted Infeed Conveyor
Seal Type:
Longitudinal Seal: Static Lap Seal
End Seal: Wire Seal (6" H × 16" W Opening)
The Used Shanklin Model F4A is a continuous motion horizontal shrink wrapper built for efficient, high-throughput form-fill-seal operations. Designed with a static longitudinal lap seal and a wire end seal, this system creates tight, consistent packages using shrink film.
The end seal dimensions are 6" high x 16" wide, which directly defines the opening size through which products must pass. As such, actual package dimensions will be slightly smaller than this due to film and clearance tolerances. The maximum package circumference is 38 inches, allowing you to wrap a wide range of medium-to-large products.
The unit is equipped with an 8-foot flighted infeed conveyor for precise product alignment and high efficiency. With OEM-rated speeds of up to 75 packages per minute, the Shanklin F4A is ideal for paper, printed materials, office supplies, and boxed retail items.
Feature | Specification |
---|---|
Model | F4A |
System Type | Continuous Motion Form Fill Seal Lap Wrapper |
Speed Rating | Up to 75 packages per minute |
End Seal Opening Dimensions | 6" H × 16" W |
Max Package Circumference | 38" |
Infeed System | 8’ Lugged / Flighted Conveyor |
Seal Type | Static Longitudinal Lap Seal + Wire End Seal |
Ideal Package Range | Slightly less than 6" H × 16" W within 38" total circumference |
Last Used For | Paper product packaging |
This shrink wrapper is ideal for:
Printed materials and paper bundles
Stationery and office supplies
Retail boxed products
Flat food cartons or bakery trays
Slim consumer goods and electronics
Cosmetics and pharmaceutical cartons
Shrink-wrapped media or brochures
Multipack retail kits
Books, magazines, and catalog bundles
Paper reams or printed marketing materials
Retail display kits in cartons
Software boxes or media items
Slim electronics or accessories in film wrap
Office supply packaging
Flat food trays for bakery or deli
Shrink-wrapped skin care and beauty kits
Stacked literature or instruction manuals
Product bundles for retail shelves
shrink wrapper
lap seal machine
Shanklin F4A
form fill seal
end seal wrapper
flighted infeed
shrink wrap machine
horizontal wrapper
static seal system
packaging machine
Shanklin F4A lap seal shrink wrapper
used horizontal form fill seal wrapper
continuous motion shrink wrapper
end seal packaging equipment
wrapper with 6 x 16 inch end seal
shrink wrap system with lugged infeed
lap seal flow wrapper
shrink wrap machine for paper products
horizontal wrapper with static lap seal
Shanklin shrink wrap machine for sale
used Shanklin F4A continuous motion shrink wrapper with 6x16 end seal
horizontal lap seal packaging system with 75 ppm speed
flighted infeed shrink wrapper for paper and office products
static longitudinal seal wrapper with wire end seal closure
form fill seal machine with 38 inch max package circumference
high speed shrink wrapper for boxed and flat retail items
lap seal packaging system for medium sized consumer goods
Shanklin F4A wrapper with adjustable formers and precision infeed
shrink wrap equipment with horizontal infeed and static seal
industrial packaging machine for brochures, books, and kits
shrink wrap machine
used packaging machine
lap seal shrink wrapper
form fill seal
shrink wrapper for sale
horizontal packaging equipment
continuous motion wrapper
Shanklin machine
industrial shrink wrapper
film wrap equipment
buy Shanklin F4A wrapper
used form fill seal wrapper for sale
sell shrink wrap machine
used horizontal shrink wrapper
packaging equipment dealer
buy shrink seal machine
end seal wrapper inventory
used shrink machine available
form fill shrink wrapper for purchase
industrial lap seal wrapper
Used Shanklin Model F4A Continuous Motion Form Fill Seal with Static longitudinal seal and wire end seal. End seal dimensions are 6" X 16". (NOTE that this is the exact height and width of the end seal opening. Package dimensions would be slightly less) Package circumference cannot exceed 38". Delivery system is an 8'lugged/flighted infeed. Speed (by Shanklin Corp OEM) is rated at up to 75 ppm
Manufacturer: Shanklin (Sealed Air Corporation)
Model: F4A
System Type: Continuous Motion Form-Fill-Seal Lap Shrink Wrapper
Delivery System: 8' Lugged / Flighted Infeed Conveyor
Seal Type:
Longitudinal Seal: Static Lap Seal
End Seal: Wire Seal (6" H × 16" W Opening)
The Used Shanklin Model F4A is a continuous motion horizontal shrink wrapper built for efficient, high-throughput form-fill-seal operations. Designed with a static longitudinal lap seal and a wire end seal, this system creates tight, consistent packages using shrink film.
The end seal dimensions are 6" high x 16" wide, which directly defines the opening size through which products must pass. As such, actual package dimensions will be slightly smaller than this due to film and clearance tolerances. The maximum package circumference is 38 inches, allowing you to wrap a wide range of medium-to-large products.
The unit is equipped with an 8-foot flighted infeed conveyor for precise product alignment and high efficiency. With OEM-rated speeds of up to 75 packages per minute, the Shanklin F4A is ideal for paper, printed materials, office supplies, and boxed retail items.
Feature | Specification |
---|---|
Model | F4A |
System Type | Continuous Motion Form Fill Seal Lap Wrapper |
Speed Rating | Up to 75 packages per minute |
End Seal Opening Dimensions | 6" H × 16" W |
Max Package Circumference | 38" |
Infeed System | 8’ Lugged / Flighted Conveyor |
Seal Type | Static Longitudinal Lap Seal + Wire End Seal |
Ideal Package Range | Slightly less than 6" H × 16" W within 38" total circumference |
Last Used For | Paper product packaging |
This shrink wrapper is ideal for:
Printed materials and paper bundles
Stationery and office supplies
Retail boxed products
Flat food cartons or bakery trays
Slim consumer goods and electronics
Cosmetics and pharmaceutical cartons
Shrink-wrapped media or brochures
Multipack retail kits
Books, magazines, and catalog bundles
Paper reams or printed marketing materials
Retail display kits in cartons
Software boxes or media items
Slim electronics or accessories in film wrap
Office supply packaging
Flat food trays for bakery or deli
Shrink-wrapped skin care and beauty kits
Stacked literature or instruction manuals
Product bundles for retail shelves
Manufacturer | Shanklin |
Model | F4A |
Category | Packaging Equipment |
Subcategory | Shrink Equipment - Horizontal Lap Sealers |
shrink wrapper
lap seal machine
Shanklin F4A
form fill seal
end seal wrapper
flighted infeed
shrink wrap machine
horizontal wrapper
static seal system
packaging machine
Shanklin F4A lap seal shrink wrapper
used horizontal form fill seal wrapper
continuous motion shrink wrapper
end seal packaging equipment
wrapper with 6 x 16 inch end seal
shrink wrap system with lugged infeed
lap seal flow wrapper
shrink wrap machine for paper products
horizontal wrapper with static lap seal
Shanklin shrink wrap machine for sale
used Shanklin F4A continuous motion shrink wrapper with 6x16 end seal
horizontal lap seal packaging system with 75 ppm speed
flighted infeed shrink wrapper for paper and office products
static longitudinal seal wrapper with wire end seal closure
form fill seal machine with 38 inch max package circumference
high speed shrink wrapper for boxed and flat retail items
lap seal packaging system for medium sized consumer goods
Shanklin F4A wrapper with adjustable formers and precision infeed
shrink wrap equipment with horizontal infeed and static seal
industrial packaging machine for brochures, books, and kits
shrink wrap machine
used packaging machine
lap seal shrink wrapper
form fill seal
shrink wrapper for sale
horizontal packaging equipment
continuous motion wrapper
Shanklin machine
industrial shrink wrapper
film wrap equipment
buy Shanklin F4A wrapper
used form fill seal wrapper for sale
sell shrink wrap machine
used horizontal shrink wrapper
packaging equipment dealer
buy shrink seal machine
end seal wrapper inventory
used shrink machine available
form fill shrink wrapper for purchase
industrial lap seal wrapper
We pay "Top Dollar" for your idle process equipment! Fill out our form and our buying team will get back to you.
SELL YOUR EQUIPMENTView our entire process equipment inventory online or visit our location for an equipment inspection.
View Inventory