Used Double Arm Mixers for Sale
Double arm mixers, also known as sigma blade mixers, are heavy-duty mixing systems designed to process highly viscous, dense, and sticky materials. These mixers use two counter-rotating blades within a horizontal trough to knead, fold, and shear materials with high torque. This mixing action makes them ideal for applications that require intensive blending and material working. Used double arm mixers are widely utilized in chemical processing, food production, pharmaceuticals, and rubber and plastics manufacturing. Aaron Equipment offers used double arm mixers for sale in a range of capacities, blade designs, and discharge configurations.
Stock No.:
52106003In-Stock Paul O. Abbe 0.25 Gallon Sigma Mixer with Jacket & VFD Controls
New and In-Stock Paul O. Abbe Model SBM-0.25 Laboratory Sigma Blade Mixer. .25 Gallon Working Capacity. Double U" shaped bowl casting machined on center line. Removable idle end allows blades to be removed. 304 SS. Rated Vacuum Internal. Internal and External welds are continuous, ground smooth, flush and pit free. Internal Surface is 180 Grit, 20-30 Ra. External Surface is Glass Bead Blasted. Free flowing open jacket with baffles for even distribution of heating media. Jacket is constructed of 304 SS and rated 14.7 psig @ 400 Deg. F with NPT Connections. Insulation Shroud is 1" Chloride Free Rock Wool with welded SS Shroud. Cover is a Clear Lexan design with Manual Clamps and Safety Switch. Thermowell is mounted through the Lexan Cover. Manual Tilt to Approx. 105 Degrees. Blades are Cast 304 SS Tangential Sigma Design. Four (4) PTFE packing glands with adjustable stainless-steel followers. Four (4) sealed roller bearing on the drive side only. Driven by a HP all stainless steel motor and stainless steel reducer. 304 SS Support Frame. Controls are NEMA 4X Stainless Steel and Supplied Loose. Includes- HP ABB VFD, Speed control potentiometer, RPM readout (front blade speed), Product temperature readout, Start/stop push buttons, Dual pushbuttons for discharge (see drawing below), Forward/reverse switch, Integration of limit switch on cover, Electrical input: 460 volt, 3-phase, 60 Hz, Dimensions 12" W X 24" H x 24". This Mixer is Brand New and In-Stock. Ready for Immediate Delivery and comes with a 1 Year Warranty. It can be inspected under power in our shop in Belvidere, IL.
MFR: Paul O Abbe
Stock No.:
52106003In-Stock Paul O. Abbe 0.25 Gallon Sigma Mixer with Jacket & VFD Controls
New and In-Stock Paul O. Abbe Model SBM-0.25 Laboratory Sigma Blade Mixer. .25 Gallon Working Capacity. Double U" shaped bowl casting machined on center line. Removable idle end allows blades to be removed. 304 SS. Rated Vacuum Internal. Internal and External welds are continuous, ground smooth, flush and pit free. Internal Surface is 180 Grit, 20-30 Ra. External Surface is Glass Bead Blasted. Free flowing open jacket with baffles for even distribution of heating media. Jacket is constructed of 304 SS and rated 14.7 psig @ 400 Deg. F with NPT Connections. Insulation Shroud is 1" Chloride Free Rock Wool with welded SS Shroud. Cover is a Clear Lexan design with Manual Clamps and Safety Switch. Thermowell is mounted through the Lexan Cover. Manual Tilt to Approx. 105 Degrees. Blades are Cast 304 SS Tangential Sigma Design. Four (4) PTFE packing glands with adjustable stainless-steel followers. Four (4) sealed roller bearing on the drive side only. Driven by a HP all stainless steel motor and stainless steel reducer. 304 SS Support Frame. Controls are NEMA 4X Stainless Steel and Supplied Loose. Includes- HP ABB VFD, Speed control potentiometer, RPM readout (front blade speed), Product temperature readout, Start/stop push buttons, Dual pushbuttons for discharge (see drawing below), Forward/reverse switch, Integration of limit switch on cover, Electrical input: 460 volt, 3-phase, 60 Hz, Dimensions 12" W X 24" H x 24". This Mixer is Brand New and In-Stock. Ready for Immediate Delivery and comes with a 1 Year Warranty. It can be inspected under power in our shop in Belvidere, IL.
MFR: Paul O Abbe
Stock No.:
52106003In-Stock Paul O. Abbe 0.25 Gallon Sigma Mixer with Jacket & VFD Controls
New and In-Stock Paul O. Abbe Model SBM-0.25 Laboratory Sigma Blade Mixer. .25 Gallon Working Capacity. Double U" shaped bowl casting machined on center line. Removable idle end allows blades to be removed. 304 SS. Rated Vacuum Internal. Internal and External welds are continuous, ground smooth, flush and pit free. Internal Surface is 180 Grit, 20-30 Ra. External Surface is Glass Bead Blasted. Free flowing open jacket with baffles for even distribution of heating media. Jacket is constructed of 304 SS and rated 14.7 psig @ 400 Deg. F with NPT Connections. Insulation Shroud is 1" Chloride Free Rock Wool with welded SS Shroud. Cover is a Clear Lexan design with Manual Clamps and Safety Switch. Thermowell is mounted through the Lexan Cover. Manual Tilt to Approx. 105 Degrees. Blades are Cast 304 SS Tangential Sigma Design. Four (4) PTFE packing glands with adjustable stainless-steel followers. Four (4) sealed roller bearing on the drive side only. Driven by a HP all stainless steel motor and stainless steel reducer. 304 SS Support Frame. Controls are NEMA 4X Stainless Steel and Supplied Loose. Includes- HP ABB VFD, Speed control potentiometer, RPM readout (front blade speed), Product temperature readout, Start/stop push buttons, Dual pushbuttons for discharge (see drawing below), Forward/reverse switch, Integration of limit switch on cover, Electrical input: 460 volt, 3-phase, 60 Hz, Dimensions 12" W X 24" H x 24". This Mixer is Brand New and In-Stock. Ready for Immediate Delivery and comes with a 1 Year Warranty. It can be inspected under power in our shop in Belvidere, IL.
MFR: Paul O Abbe
Stock No.:
52106003In-Stock Paul O. Abbe 0.25 Gallon Sigma Mixer with Jacket & VFD Controls
New and In-Stock Paul O. Abbe Model SBM-0.25 Laboratory Sigma Blade Mixer. .25 Gallon Working Capacity. Double U" shaped bowl casting machined on center line. Removable idle end allows blades to be removed. 304 SS. Rated Vacuum Internal. Internal and External welds are continuous, ground smooth, flush and pit free. Internal Surface is 180 Grit, 20-30 Ra. External Surface is Glass Bead Blasted. Free flowing open jacket with baffles for even distribution of heating media. Jacket is constructed of 304 SS and rated 14.7 psig @ 400 Deg. F with NPT Connections. Insulation Shroud is 1" Chloride Free Rock Wool with welded SS Shroud. Cover is a Clear Lexan design with Manual Clamps and Safety Switch. Thermowell is mounted through the Lexan Cover. Manual Tilt to Approx. 105 Degrees. Blades are Cast 304 SS Tangential Sigma Design. Four (4) PTFE packing glands with adjustable stainless-steel followers. Four (4) sealed roller bearing on the drive side only. Driven by a HP all stainless steel motor and stainless steel reducer. 304 SS Support Frame. Controls are NEMA 4X Stainless Steel and Supplied Loose. Includes- HP ABB VFD, Speed control potentiometer, RPM readout (front blade speed), Product temperature readout, Start/stop push buttons, Dual pushbuttons for discharge (see drawing below), Forward/reverse switch, Integration of limit switch on cover, Electrical input: 460 volt, 3-phase, 60 Hz, Dimensions 12" W X 24" H x 24". This Mixer is Brand New and In-Stock. Ready for Immediate Delivery and comes with a 1 Year Warranty. It can be inspected under power in our shop in Belvidere, IL.
MFR: Paul O Abbe
Stock No.:
52106003In-Stock Paul O. Abbe 0.25 Gallon Sigma Mixer with Jacket & VFD Controls
New and In-Stock Paul O. Abbe Model SBM-0.25 Laboratory Sigma Blade Mixer. .25 Gallon Working Capacity. Double U" shaped bowl casting machined on center line. Removable idle end allows blades to be removed. 304 SS. Rated Vacuum Internal. Internal and External welds are continuous, ground smooth, flush and pit free. Internal Surface is 180 Grit, 20-30 Ra. External Surface is Glass Bead Blasted. Free flowing open jacket with baffles for even distribution of heating media. Jacket is constructed of 304 SS and rated 14.7 psig @ 400 Deg. F with NPT Connections. Insulation Shroud is 1" Chloride Free Rock Wool with welded SS Shroud. Cover is a Clear Lexan design with Manual Clamps and Safety Switch. Thermowell is mounted through the Lexan Cover. Manual Tilt to Approx. 105 Degrees. Blades are Cast 304 SS Tangential Sigma Design. Four (4) PTFE packing glands with adjustable stainless-steel followers. Four (4) sealed roller bearing on the drive side only. Driven by a HP all stainless steel motor and stainless steel reducer. 304 SS Support Frame. Controls are NEMA 4X Stainless Steel and Supplied Loose. Includes- HP ABB VFD, Speed control potentiometer, RPM readout (front blade speed), Product temperature readout, Start/stop push buttons, Dual pushbuttons for discharge (see drawing below), Forward/reverse switch, Integration of limit switch on cover, Electrical input: 460 volt, 3-phase, 60 Hz, Dimensions 12" W X 24" H x 24". This Mixer is Brand New and In-Stock. Ready for Immediate Delivery and comes with a 1 Year Warranty. It can be inspected under power in our shop in Belvidere, IL.
MFR: Paul O Abbe
Stock No.:
52106003In-Stock Paul O. Abbe 0.25 Gallon Sigma Mixer with Jacket & VFD Controls
New and In-Stock Paul O. Abbe Model SBM-0.25 Laboratory Sigma Blade Mixer. .25 Gallon Working Capacity. Double U" shaped bowl casting machined on center line. Removable idle end allows blades to be removed. 304 SS. Rated Vacuum Internal. Internal and External welds are continuous, ground smooth, flush and pit free. Internal Surface is 180 Grit, 20-30 Ra. External Surface is Glass Bead Blasted. Free flowing open jacket with baffles for even distribution of heating media. Jacket is constructed of 304 SS and rated 14.7 psig @ 400 Deg. F with NPT Connections. Insulation Shroud is 1" Chloride Free Rock Wool with welded SS Shroud. Cover is a Clear Lexan design with Manual Clamps and Safety Switch. Thermowell is mounted through the Lexan Cover. Manual Tilt to Approx. 105 Degrees. Blades are Cast 304 SS Tangential Sigma Design. Four (4) PTFE packing glands with adjustable stainless-steel followers. Four (4) sealed roller bearing on the drive side only. Driven by a HP all stainless steel motor and stainless steel reducer. 304 SS Support Frame. Controls are NEMA 4X Stainless Steel and Supplied Loose. Includes- HP ABB VFD, Speed control potentiometer, RPM readout (front blade speed), Product temperature readout, Start/stop push buttons, Dual pushbuttons for discharge (see drawing below), Forward/reverse switch, Integration of limit switch on cover, Electrical input: 460 volt, 3-phase, 60 Hz, Dimensions 12" W X 24" H x 24". This Mixer is Brand New and In-Stock. Ready for Immediate Delivery and comes with a 1 Year Warranty. It can be inspected under power in our shop in Belvidere, IL.
MFR: Paul O Abbe
Stock No.:
52106003In-Stock Paul O. Abbe 0.25 Gallon Sigma Mixer with Jacket & VFD Controls
New and In-Stock Paul O. Abbe Model SBM-0.25 Laboratory Sigma Blade Mixer. .25 Gallon Working Capacity. Double U" shaped bowl casting machined on center line. Removable idle end allows blades to be removed. 304 SS. Rated Vacuum Internal. Internal and External welds are continuous, ground smooth, flush and pit free. Internal Surface is 180 Grit, 20-30 Ra. External Surface is Glass Bead Blasted. Free flowing open jacket with baffles for even distribution of heating media. Jacket is constructed of 304 SS and rated 14.7 psig @ 400 Deg. F with NPT Connections. Insulation Shroud is 1" Chloride Free Rock Wool with welded SS Shroud. Cover is a Clear Lexan design with Manual Clamps and Safety Switch. Thermowell is mounted through the Lexan Cover. Manual Tilt to Approx. 105 Degrees. Blades are Cast 304 SS Tangential Sigma Design. Four (4) PTFE packing glands with adjustable stainless-steel followers. Four (4) sealed roller bearing on the drive side only. Driven by a HP all stainless steel motor and stainless steel reducer. 304 SS Support Frame. Controls are NEMA 4X Stainless Steel and Supplied Loose. Includes- HP ABB VFD, Speed control potentiometer, RPM readout (front blade speed), Product temperature readout, Start/stop push buttons, Dual pushbuttons for discharge (see drawing below), Forward/reverse switch, Integration of limit switch on cover, Electrical input: 460 volt, 3-phase, 60 Hz, Dimensions 12" W X 24" H x 24". This Mixer is Brand New and In-Stock. Ready for Immediate Delivery and comes with a 1 Year Warranty. It can be inspected under power in our shop in Belvidere, IL.
MFR: Paul O Abbe
Stock No.:
53031007Used Winkworth Z2 Vacuum Double Arm Mixer – 1.75L, 316 SS, Industrial
Used- Winkworth Vacuum Double Arm Mixer, Model Z2 Vacuum, 316 Stainless Steel. Working capacity 1.75 liters. Approximate 140mm (5.5") x 140mm (5.5") x 109mm (4.29") deep jacketed vacuum trough. Internal rated 60 psi at 300 degrees C (572 F). Jacket rated for 3.5 bar (50psi) at 300 degrees C (572 F). Dual overlapping sigma style mixing blades. Driven by a .37kw (1/2hp), 3/60/460 volt, 1690 rpm gear motor, manual speed control, output 19 to 95 rpm. Top vacuum cover with 2.5" sight glass. Control panel. Includes VWR international model 1166 temperature controller. Base mounted on cart. Serial# 16564.
MFR: Winkworth
Stock No.:
53031007Used Winkworth Z2 Vacuum Double Arm Mixer – 1.75L, 316 SS, Industrial
Used- Winkworth Vacuum Double Arm Mixer, Model Z2 Vacuum, 316 Stainless Steel. Working capacity 1.75 liters. Approximate 140mm (5.5") x 140mm (5.5") x 109mm (4.29") deep jacketed vacuum trough. Internal rated 60 psi at 300 degrees C (572 F). Jacket rated for 3.5 bar (50psi) at 300 degrees C (572 F). Dual overlapping sigma style mixing blades. Driven by a .37kw (1/2hp), 3/60/460 volt, 1690 rpm gear motor, manual speed control, output 19 to 95 rpm. Top vacuum cover with 2.5" sight glass. Control panel. Includes VWR international model 1166 temperature controller. Base mounted on cart. Serial# 16564.
MFR: Winkworth
Stock No.:
53031007Used Winkworth Z2 Vacuum Double Arm Mixer – 1.75L, 316 SS, Industrial
Used- Winkworth Vacuum Double Arm Mixer, Model Z2 Vacuum, 316 Stainless Steel. Working capacity 1.75 liters. Approximate 140mm (5.5") x 140mm (5.5") x 109mm (4.29") deep jacketed vacuum trough. Internal rated 60 psi at 300 degrees C (572 F). Jacket rated for 3.5 bar (50psi) at 300 degrees C (572 F). Dual overlapping sigma style mixing blades. Driven by a .37kw (1/2hp), 3/60/460 volt, 1690 rpm gear motor, manual speed control, output 19 to 95 rpm. Top vacuum cover with 2.5" sight glass. Control panel. Includes VWR international model 1166 temperature controller. Base mounted on cart. Serial# 16564.
MFR: Winkworth
Stock No.:
53031007Used Winkworth Z2 Vacuum Double Arm Mixer – 1.75L, 316 SS, Industrial
Used- Winkworth Vacuum Double Arm Mixer, Model Z2 Vacuum, 316 Stainless Steel. Working capacity 1.75 liters. Approximate 140mm (5.5") x 140mm (5.5") x 109mm (4.29") deep jacketed vacuum trough. Internal rated 60 psi at 300 degrees C (572 F). Jacket rated for 3.5 bar (50psi) at 300 degrees C (572 F). Dual overlapping sigma style mixing blades. Driven by a .37kw (1/2hp), 3/60/460 volt, 1690 rpm gear motor, manual speed control, output 19 to 95 rpm. Top vacuum cover with 2.5" sight glass. Control panel. Includes VWR international model 1166 temperature controller. Base mounted on cart. Serial# 16564.
MFR: Winkworth
Stock No.:
53031007Used Winkworth Z2 Vacuum Double Arm Mixer – 1.75L, 316 SS, Industrial
Used- Winkworth Vacuum Double Arm Mixer, Model Z2 Vacuum, 316 Stainless Steel. Working capacity 1.75 liters. Approximate 140mm (5.5") x 140mm (5.5") x 109mm (4.29") deep jacketed vacuum trough. Internal rated 60 psi at 300 degrees C (572 F). Jacket rated for 3.5 bar (50psi) at 300 degrees C (572 F). Dual overlapping sigma style mixing blades. Driven by a .37kw (1/2hp), 3/60/460 volt, 1690 rpm gear motor, manual speed control, output 19 to 95 rpm. Top vacuum cover with 2.5" sight glass. Control panel. Includes VWR international model 1166 temperature controller. Base mounted on cart. Serial# 16564.
MFR: Winkworth
Double Arm Mixer Applications & Typical Use Cases
Used double arm mixers are commonly used in applications requiring high-torque mixing of viscous or cohesive materials. Typical use cases include:
Dough, bakery products, and food paste mixing
Adhesives, sealants, and resins
Rubber, plastics, and polymer compounding
Pharmaceutical and cosmetic pastes
Chemical and specialty material processing
These systems are essential for achieving uniform mixing in materials that are difficult to process with standard mixers.
When to Choose a Double Arm Mixer
Double arm mixers are best suited for processes involving extremely viscous, sticky, or non-flowing materials. They are typically selected when high shear and kneading action are required to properly blend ingredients. Compared to planetary mixers or ribbon blenders, double arm mixers provide greater torque and are preferred for applications requiring intensive material working and consistent batch results.
Used Double Arm Mixer Buying Considerations
When evaluating a used double arm mixer, consider:
Capacity and batch size: Ensure the mixer meets production requirements
Blade design: Sigma blades vs. other configurations impact mixing performance
Discharge method: Tilt discharge, bottom discharge, or extrusion options
Jacketed trough: Heating or cooling capabilities for temperature-sensitive processes
Drive system and condition: Evaluate motor power, gearbox, and maintenance history
Why Buy Used Double Arm Mixers
Purchasing a used double arm mixer can significantly reduce capital investment while maintaining high-performance mixing capabilities. Many units are available for immediate delivery, helping facilities avoid long lead times associated with new equipment. Used mixers also provide access to proven systems suitable for demanding industrial mixing applications.
Sell Your Used Double Arm Mixers
Aaron Equipment purchases surplus and used double arm mixers from a wide range of manufacturers and configurations. Whether you are upgrading mixing systems, closing a facility, or selling idle equipment, our team can assist with buyouts or consignment opportunities.
A double arm mixer is a heavy-duty mixing machine that uses two counter-rotating blades to knead and mix viscous materials. It is commonly used for thick or sticky products.
Double arm mixers are used for processing dough, adhesives, rubber, plastics, pharmaceuticals, and chemical pastes. They are ideal for mixing materials that require high torque and intensive blending.
Double arm mixers provide high torque and kneading action, while other mixers may focus on blending or low-shear mixing. They are specifically designed for viscous and difficult-to-mix materials.
The cost of a used double arm mixer depends on capacity, blade design, manufacturer, condition, and configuration. Larger or jacketed units typically command higher prices.
Yes. Aaron Equipment purchases used double arm mixers across a range of sizes and configurations. If you have equipment available for sale, submit your details to receive an evaluation.