Stock No.:
51855002Sandborn 48" x 24" Perforate Basket Centrifuge. Used.
Used-Sandborn 48" x 24" Perforate Basket Centrifuge. 316SS. Bottom unload. Maximum bowl speed 1150 rpm, Maximum operating temp. 150 degrees F. Maximum product bulk density 80 lb/ft3. Maximum pressure .3 psi. Air operated plow. SS feed tube, plow, wash pipe and inspection glass rinse line. Power pack details:20 hp, 1755 rpm, rated for 3800 psi and 300 ft/lb of torque.
MFR: Sanborn
Stock No.:
53422001TEA 48" diameter Stainless Steel Screener / Sifter
Used- TEA 48" Diameter Screener / Sifter, Stainless Steel. Single deck, 2 separation. 8" Discharges. Stainless steel top and bottom deck. Driven by approximate 2.5hp motor. Mounted on carbons steel base. 3/60/230/460 Volt.
MFR: TEA
Stock No.:
53762002Used Sweco Model XS48S66TLUE Vibratory Screener – 48” Diameter, Stainless Steel
Used- Sweco Model XS48S66TLUE Vibratory Screener, Stainless Steel. Approximately 48" inside diameter screen. Single deck, single separation. Driven by a 2.5 HP Motor. Mounted on a Carbon Steel base. Serial# 308513-A08/05.
MFR: Sweco
Stock No.:
53762003Used Sweco 48” Vibratory Screener – Model XS48S66, Stainless Steel, Single Deck
Used- Sweco 48" Diameter Vibratory Screener, Model XS48S88, Stainless Steel. Approximately 48" inside diameter screen. Single deck, single separation. Driven by a 2.5 HP Motor. Mounted on a Carbon Steel base. Serial# 642963-B996.
MFR: Sweco
Stock No.:
54234013Used Sweco 48" Vibro-Energy Separator – Model XS48S88HSTL | Stainless Steel
Used Sweco 48" Diameter Vibro-Energy Separator, Model XS48S88HSTL. Stainless steel contact parts. Single deck, 2 separation. Driven by a 2.5hp, 3/60/460 volt, 1740rpm motor. No top cover. Mounted on painted carbon steel base. Serial# 188375-A01/19.
MFR: Sweco
Stock No.:
54687062Used Tolhurst Batch-O-Matic solid basket 48" basket centrifuge. Serial # T-99273. Used mainly with fine organic particulates. Stainless steel contact surfaces. Basket is 30" deep and has 5 flites th...
Used-Tolhurst Batch-O-Matic solid basket 48" basket centrifuge. Serial # T-99273. Used mainly with fine organic particulates. Stainless steel contact surfaces. Basket is 30" deep and has 5 flites that hold 7.25" of cake to the side of basket. Total cake volume is 16 cuft. Centrifuge is capable of handling product that weighs up to 66 lbs per cuft. Basket turns at 1080 rpm. The product is feed through the top via 2" pipe to bottom of cake area. It is need forced the basket wall with centrifugal force and is forced up and over the walls of the basket. The liquids are discharged through a 4" flanged fitting in bottom of unit. Solids are discharged through conical bottom to 6" outlet. Unit is equipped with five finger plow to clear cake material. Unit also has a CIP system. This unit is bottom driven and has center-slung suspension to handle unbalanced or liquid loads. The bowl is belt driven by hydraulic power unit. The hydraulic power unit provides 1100 psi turning at 1200 rpm with a 30 hp motor. Top has a 34" x 14" hinged access door. Unit requires 460 vac 3 ph electrical supply. May be good Parts machine.
MFR: Tolhurst
Stock No.:
54687063Used Tolhurst Batch-O-Matic solid basket 48" basket centrifuge. Serial # TA-15612. Used mainly with fine organic particulates. Stainless steel contact surfaces. Basket is 30" deep and has 5 flites t...
Used-Tolhurst Batch-O-Matic solid basket 48" basket centrifuge. Serial # TA-15612. Used mainly with fine organic particulates. Stainless steel contact surfaces. Basket is 30" deep and has 5 flites that hold 7.25" of cake to the side of basket. Total cake volume is 16 cuft. Centrifuge is capable of handling product that weighs up to 66 lbs per cuft. Basket turns at 1080 rpm. The product is feed through the top via 2" pipe to bottom of cake area. It is need forced the basket wall with centrifugal force and is forced up and over the walls of the basket. The liquids are discharged through a 4" flanged fitting in bottom of unit. Solids are discharged through connical bottom to 6" outlet. Unit is eqipped with five fingerd plow to clear cake material. Unit also has a CIP system. This unit is bottom driven and has center-slung suspension to handle unbalanced or liquid loads. The bowl is belt driven by hydrualic power unit. The hydraulic power unit provides 1100 psi turning at 1200 rpm with a 30 hp motor. Top has a 34" x 14" hinged access door. Unit requires 460 vac 3 ph electrical supply. Good Condition. (was rebuilt with in two years of the plant shutting down)
MFR: Tolhurst
Stock No.:
54687096Used 48 cu.ft. (estimated) Clow filter press. It is equipped with 52 each 1200 mm (47 5/8" x 47 5/8" x 2 1/8") non-gasketed recessed poly plates. This unit is sheathed with plastic for corrosive envi...
Used-48 cu.ft. (estimated) Clow filter press. It is equipped with 52 each 1200 mm (47 5/8" x 47 5/8" x 2 1/8") non-gasketed recessed poly plates. This unit is sheathed with plastic for corrosive environments. 4" center feed with 4 each, 2" corner returns. Built in plate shifter. Hydraulic closure via a 10 hp hydraulic power unit, 208-230/460 vac 3 ph power required. This unit was connected to a central control panel that controlled multiple machines. The control panel is not included.
MFR: Clow
Stock No.:
53992001Used Sweco 48" Vibro-Energy Separator – 3 Deck Stainless Steel
Used Sweco Model XS48S888BVCBP4SDTL Vibro-Energy Separator, 48" Stainless Steel. Double deck, 3 Separation. Driven by 2.5 HP, 3/60/208-230 Volt, 1160 rpm motor. Mounted on stainless steel base. Serial# 185552-A01/19. Unit does not include screens.
MFR: Sweco
Stock No.:
54469001Used Atlas Copco XAS 185 (JD) Trailered Air Compressor | 185 CFM Rotary Screw Diesel Unit
Used- Atlas Copco Trailered Rotary Screw Air Compressor, Model XAS 185 (JD). Maximum final pressure 123 PSIG at 185 CFM. Contains a 49 HP John Deere Engine. 3 cylinder. Maximum 2750 RPM. Has a 25 gallon fuel tank. 992 hours run, built 2007.
MFR: Atlas Copco
Stock No.:
50295001Used Dodman Ltd. Blanching System – Rotary Drum Blancher & Chiller
Used- Dodman Ltd. Blanching System. Consisting of: (1) Dodman Ltd. rotary drum rehydration blancher, Type DST 010, Stainless steel construction. Includes water regulating pump and manifold. On 4 legs. Overall dimensions: 7' 5" width x 18'5" long x 9'1" high (2300 mm width x 5700 mm long x 2800 mm high). (1) Dodman Ltd. rotary drum chiller, Type FPM 632, Stainless steel construction. 49" diameter x 98" straight side (1500 mm diameter x 3000 mm straight side) chilling drum. Includes water regulating pump and manifold. On 4 legs. New 1996. Overall dimensions: 75" width x 185" long x 91" high (2300 mm width x 5700 mm long x 2800 mm high). (3) Locker rectangle in/outfeed screens/sifters, stainless steel construction. 1400 rpm. Frame mounted on 4 legs. Previous used on vegetables. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible
MFR: Dodman Ltd.
Stock No.:
54687011Used Krauss Maffei MT 1/200 316L Stainless Steel Mixer Vacuum Dryer
Used Krauss Maffei Mixer Vacuum Dryer MT, Model MT 1/200. Serial # 7098. National Board # 21424. Constructed of 316L stainless steel. Interior has polished surface. Conical vessel has a capacity of 49.43 cuft with working volume of 35.3 cuft. Dryer uses an 8" diameter inclined orbiting screw, driven by a 10 hp drive to gently agitate product while drying. Can dry particles up to 5 mm in size. Vessel is rated for Full Vacuum/150 psi @ 450 f on jacket and internal. Actual drying temperature maximum is 302 f. The top has an 18" manway with 6" sight glass, 18" flanged fitting, 4" sight glass, (2) 3" flanged fittings, (2) 2" flanged fittings, 6" flanged fittings and (2) 1" threaded fitting for the top jacket. The side has (2) 2" flanged fittings for the body jacket. The bottom has a 10" flanged discharge fitting with pneumatically operated flush mount valve and (2) 1" threaded fittings for bottom jacket.
MFR: Krauss Maffei