Industrial Three Roll Mill - Keith Machinery 4” x 8” Cored Rolls

Used- Keith Machinery Horizontal Three Roll Mill, Model 4X8. (3) 4" Diameter x 8" wide cored rolls. Adjustable end guides, knife scraper with discharge pan. Driven by an approximate 1 hp motor. Serial # 95021B.

MFR: Keith Machinery

Rosenmund 4 Square Meter Nutsche Filter, Model RPD4-388-86

Used- Rosenmund 4 Square Meter Nutsche Filter, Model RPD4-388-86. Bottom discharge; 904L stainless steel shell, 316 stainless steel jacket; Shell rated 75 psi/FV at 397 degrees F; Half pipe jacket rated 100 psi/FV at 392 degrees F; Base rated 150 psi/FV at 370 degrees F; 10 hp main drive; hydraulic pack; Serial # F69653-1185-1; National Board # 17935; Built 1986 (Rebuilt since).

MFR: Rosenmund

Used Fitzpatrick Chilsonator – Model 4L x 10D, 10" x 4" Stainless Steel Rolls, 50–100 kg/hr Capacity

Used Fitzpatrick Chilsonator Model 4L x 10D, 10" x 4" Stainless Steel Rolls, 50100 kg/hr Capacity. Dependent on density of product and roll pressure and screw speed is 50 to 100 kg/hr. (110 to 220 lbs./hr).

MFR: Fitzpatrick

Used Scott Turbon DP-5-HYD Planetary Mixer – 4 Gal, Vacuum Capable, Dual Can System

Used- Scott Turbon Planetary Mixer, Model DP-5-HYD. 4 Gallon stainless steel mixing can, designed for mixing under vacuum. Vacuum hood is fitted with 2 approximately 2" sight/charge ports. First of 2 mixing cans is jacketed with a flat bottom and bottom outlet with a tri-clamp style end cap closure. The second mix can is not jacketed and has a cone bottom with a center bottom outlet with a tri-clamp end cap closure. Includes a car with foot activated hydraulic jack for mix can exchange. Also include 208 volt controls with raise and lower buttons. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Scott Turbon

Lot of 4 New in Box Tri-Clover 4" Sanitary Y Body Shut-Off Valves

Unused Tri-Clover (Alfa Laval) "Y" Body Shut-Off Valves, Model 761-90M-29HPL-4-316L-34-4-3 , Lot of 4. 316L Stainless steel. Molded rubber seat. 4" Port size. Air-Actuated. New in box. (Quantity of 4).

MFR: Crepaco

Used Process Control X Series 2 Gravimetric Blender – Model EB576BAF02 | 4 Hoppers | 15 HP Vacuum Pump | Built 2018

Used- Process Control Corporation X Series 2 Gravimetric Blender, Model EB576BAF02. Mild steel construction; (4) Feed hoppers; Interchangeable metering units; Closed-loop speed regulation; Overload protection; integral loading support platform for receivers; (3) swing gates replacing flappers; 2.5" to 3.5" reducer for vacuum lines; 4" to 3.5" reducer for material lines. Control features included: Monitored weight loss of ingredient hoppers; Manual volumetric mode. 115V/60Hz, Built 2018. With 15HP vacuum pump and unused dust collection system.

MFR: Process Control

Parr 4526 Bench Top Reactor 2L 350°C 1900 PSI Laboratory Reactor System

Used Parr Bench Top Reactor, Model 4526, Approximate 2,000mL Volume. Cylinder 4" I.D. x 10.5" deep. Rated 1900 psi at 350 degrees C. With Model A2600HC12EB HEATER/TW 1500W 115V 2L. Includes model 4848 reactor controller. Serial# 4520-2201-150190. Year 2022.

MFR: Parr

Used Shortening Extrusion System – Block Feed, Waukesha 064 PD Pump – Twin Feed

Used- Block Shortening Extrusion & Pumping System, Stainless Steel. Block ram feed hopper, approximate 17" x 13". Approximate 4" diameter x 36" long horizontal twin feed screws. Driven by 1hp, 3/60/230/460 volt, 1700 rpm gear motor. Feeds into Waukesha positive displacement pump, model 064. Control panel with (2) Allen Bradley VFD's. Mounted on stainless frame with casters. 3/60/480 Volt. No MFG tag.

Used Stokes 51 station model 551-1 rotary tablet press. This is a double rotary high speed tablet compressing machine. Tablet press has a 4 ton compression force, a 7/16" maximum tablet diameter, and...

Used-Stokes 51 station model 551-1 rotary tablet press. This is a double rotary high speed tablet compressing machine. Tablet press has a 4 ton compression force, a 7/16" maximum tablet diameter, and a 11/16" maximum depth of fill. The press is rated 1250 up to 3750 tablets/minute. Driven by a 3 hp 1800 rpm motor. Requires 220/440 vac 3 phase electrical supply. Includes its control panel. This unit was reconditioned in 2015 and then used in a product development lab. Very good condition.

MFR: Stokes

Used Stokes 51 station model 551-1 rotary tablet press. This is a double rotary high speed tablet compressing machine. Tablet press has a 4 ton compression force, a 7/16" maximum tablet diameter, and...

Used-Stokes 51 station model 551-1 rotary tablet press. This is a double rotary high speed tablet compressing machine. Tablet press has a 4 ton compression force, a 7/16" maximum tablet diameter, and a 11/16" maximum depth of fill. The press is rated 1250 up to 3750 tablets/minute. Driven by a 3 hp 1800 rpm motor. Requires 220/440 vac 3 phase electrical supply.

MFR: Stokes

Used Stokes 51 station model 551-1 rotary tablet press. This is a double rotary high speed tablet compressing machine. Tablet press has a 4 ton compression force, a 7/16" maximum tablet diameter, and...

Used-Stokes 51 station model 551-1 rotary tablet press. This is a double rotary high speed tablet compressing machine. Tablet press has a 4 ton compression force, a 7/16" maximum tablet diameter, and a 11/16" maximum depth of fill. The press is rated 1250 up to 3750 tablets/minute. No feed hoppers. Driven by a 3 hp 1800 rpm motor. Requires 220/440 vac 3 phase electrical supply.

MFR: Stokes

Used Stokes 51 station model 551-1 rotary tablet press. This is a double rotary high speed tablet compressing machine. Tablet press has a 4 ton compression force, a 7/16" maximum tablet diameter, and...

Used-Stokes 51 station model 551-1 rotary tablet press. This is a double rotary high speed tablet compressing machine. Tablet press has a 4 ton compression force, a 7/16" maximum tablet diameter, and a 11/16" maximum depth of fill. The press is rated 1250 up to 3750 tablets/minute.2 feed hoppers. Driven by a 3 hp 1800 rpm motor. Requires 220/440 vac 3 phase electrical supply.

MFR: Stokes