Used PTI TS4500 4.5" Pelletizing Line – 200 HP Extruder, Water Ring Pelletizer

Used- PTI Pelletizing Line, Model TS4500, 4.5" Diameter. 30:1 L/D Extruder having an electrically heated, water cooled (closed loop), and side vented barrel at a nominal 42? center-line height. The gearbox is a Flender model SZNE250 having a reduction ratio of 13.88:1 and has a service rating of 200 HP and a catalogue rating of 325 HP. The gearbox is belt driven in a wraparound manner by a 200 HP D/C motor with Safetronics SCR control. Over-sized on center oblong feed throat with water cooling. Free-standing temperature control panel has ten (10) zones of temperature controls. SCR is mounted inside the control panel. 480/3/60 400 amps. S/N 1832. Mounted on the extruder discharge is a model HSC-45 hydraulic slide plate screen changer having two (2) nominal 4.5" diameter breaker plates with oversized 5 HP hydraulic power pack. S/N H45-204. Downstream is a PTI model CPF1000S water ring pelletizing system with 3 HP cutter head, die, sluiceway, water system, Gala model 8.1BF spin dryer and control panel. S/N 2780. 460/3/60 30 amps.

MFR: PTI

Used Prodex 4.5" Pelletizing Line with 300 HP Extruder & Cumberland Pelletizer

Used- Prodex Pelletizing Line Prodex 4.5" 32:1 L/D extruder having an electrically heated, water cooled (closed loop), and side vented barrel. The gearbox is a Lufkin change gear gearbox and driven in a tuck under manner by a 300 HP A/C motor with Yaskawa inverter. Includes stand-alone cooling system for the gearbox. Over-sized on center oblong feed throat with water cooling and volumetric screw feeder. Free-standing temperature control panel has ten (10) zones of temperature controls. Inverter is free standing and mounted in its own enclosure. Mounted on the extruder discharge is a hydraulic slide plate screen changer having two (2) nominal 4.5" diameter breakers with hydraulic power pack, stand, and strand die. Downstream includes an 11" Cumberland "Quietizer" pelletizer with solid helical rotor. Powered by a 25 HP A/C motor and Yaskawa model V1000 inverter. Pelletizer feeds 10" x 72" Witte two deck screener. Offered less extruder screw.

MFR: Prodex

Used Littleford Model DVT-130 Mixer/Reactor – High-Performance Industrial Proces

Used Littleford Model DVT-130 Mixer/Reactor, Stainless Steel. 3.1 Cubic feet working capacity (4.6 total). Jacketed chamber approximately 20" diameter x 26" long, bolt-on flat hinged jacketed cover. Jacket rated 75 psi at 32 to 320 degrees F. Internal rated 100 psi / Full vacuum at 32 to 320 degrees F. Side chopper motor, driven by 15hp, 3/60/230/460 volt, 3495 rpm (not installed). Includes control panel with voltage/phase indicators, gauges, piping. National Board#4298. Serial# 41779-4298. 3/60/480 Volt.

Used Herbold Granulator. 15.5" x 15.5" feed opening

Used- Herbold Granulator. 15.5" x 15.5" feed opening; (3) complete sets of (9) blades w/ (17) spares; 3 complete sets of (2) counter blades w/ (5) spares; 6mm and 9.5mm screens. Approx. OAD: 8.9' L x 5.3' W x 7.3' H. Driven by a 40 HP, 3/60/575V motor. With control panel. Previously used for plastic. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Herbold

Used – Atlas Copco GA30+ Rotary Screw Air Compressor – 40 HP, 210 CFM, 109 PSIG

Used Atlas Copco GA30+ Rotary Screw Air Compressor 40 HP, 210 CFM, 109 PSIG. Approximately 109psig max working pressure, 210 cfm capacity. Driven by a 30kw (40hp) motor. Mounted Control Panel.

MFR: Atlas Copco

Atlas Copco GA30+ Rotary Screw Compressor – 210 CFM, 40 HP Industrial Air System

Atlas Copco GA30+ Rotary Screw Compressor 210 CFM, 40 HP Industrial Air System. Approximately 109psig max working pressure, 210 cfm capacity. Driven by a 30kw (40hp) motor. Mounted Control Panel.

MFR: Atlas Copco

Used Coperion Werner & Pfleiderer ZSK 50 MCC Twin Screw Extruder – 40mm High-Speed Compounding System with Side Feeder

Used Coperion Werner & Pfleiderer ZSK 50 MCC Twin Screw Extruder 40mm High-Speed Compounding System with Side Feeder, Co-Rotating, (2) 40 mm diameter side by side screws, 54:1 L/D ratio, 10 total barrel sections, (9) heated barrels, electrically heated water cooled. Driven by a 181 kw (242.72hp) - 470 volt DC drive motor via a PIV gear box. Screw speed maximum 920-1056 RPM (1) Die head, Frame mounted. (1) Coperion Werner & Pfleiderer ZS.B 58 twin screw side feeder, (1) Cooling Bath, Control panel. Serial# 64012350, Built 2000. 34432 Hours. Weight 7.4 tonnes. Previously used in a compounding application. Our Freight Specialists can assist with any customs documents and forms to insure a smooth transition.

MFR: Werner & Pfleiderer

Used Lyco Blancher – Model Clean Flow CKFF, 7’ Chamber, Stainless Steel

Used- Lyco Blancher, Model Clean Flow CKFF. Stainless steel. 7' chamber length. 40" infeed diameter. Cool products to under 40 degrees F. CIP system. On (4) legs. 3/60/460V. Built 2011. Previously used for food.

MFR: Lyco

Used Kason K40-1-SS Vibroscreen Circular Sifter | 40" SS Single-Deck | 75 lbs/min | XP Motor | Built 2023

Used Kason K40-1-SS Vibroscreen Circular Sifter | 40" SS Single-Deck | 75 lbs/min | XP Motor | Built 2023. 304 stainless steel construction. Single deck, double separation. 75 lbs/min maximum sift rate. Stainless steel top cover. 3ph/230-460V, 1200 RPM XP motor. Built 2023. Previously used for flour.

MFR: Kason

GEA Ecoflex VT10 Plate Heat Exchanger For Sale – 145 PSI, 212°F Rated – Approx.

Used- GEA Ecoflex GmbH Plate Heat Exchanger, Model VT10 CDS-17. Approximately 40 square foot area. Approximate (44) Stainless steel plates 31" x 8-1/2" wide. Operating pressure 0 to 145 psi (0 to 10 bar). Operating temperature 32 to 212 degrees F (0 to 100 degrees C). 2" Inlet/outlets. Mounted in an expandable frame. Serial# 169/16856.

Used Ingersoll Rand RS30i-A125 Rotary Screw Air Compressor Package – 40 HP, 184 CFM, 125 PSI

Used Ingersoll Rand RS30i-A125 Rotary Screw Air Compressor Package 40 HP, 184 CFM, 125 PSI. Rated for approximately 184 CFM with a 125 PSI maximum operating pressure. Driven by a 40 HP motor. Package includes an Ingersoll Rand D255NC refrigerated air dryer for moisture removal and improved compressed air quality, along with an air receiver tank to provide air storage, stabilize system pressure, and reduce compressor cycling. Reported 1,772 operating hours. Serial number CBV457593, built 2016. Complete compressed air package suitable for a wide range of industrial applications.

MFR: Ingersoll-Rand

Used Sharples SP-5500 Solid Bowl Basket Centrifuge, Sludge Pak

Used- Sharples SP-5500 Sludge-Pak Solid Bowl Basket Centrifuge, 316 Stainless Steel. Maximum bowl speed 1500, tri-pod suspension system, 40" x 24" basket, pneumatic single motion plow assembly, pneumatic skimmer assembly, 3-way skimmer valve, vibration switch, feed pipe, 40 hp oilgear hydraulic drive system, control.

MFR: Sharples