Stock No.:
54281001Used Kaeser ASD 25 Rotary Screw Air Compressor | 25 HP | 112 CFM @ 125 PSIG | Si
Used Kaeser ASD 25 Rotary Screw Air Compressor | 25 HP | 112 CFM @ 125 PSIG | Sigma Control 2. Unit is driven by a 25hp 3/60/208-230/460v 3550rpm motor. Equipped with a Kaeser Sigma Control 2 controller with RFID capability. Hours at time of inspection indicate approximately 39,567 run hours and 30,258 load hours. Enclosure is Type 1, designed for indoor industrial use. Nameplate data includes drive motor FLA of 63/59/30 amps (depending on voltage). Unit appears complete with integrated cooling and controls, as shown. Suitable for a wide range of industrial compressed air applications. Serial# 1125, built 2012.
MFR: Kaiser
Stock No.:
54281002Kaeser ASD 25 Industrial Rotary Screw Air Compressor with Sigma Control 2 | 25 H
Kaeser ASD 25 Industrial Rotary Screw Air Compressor with Sigma Control 2 | 25 HP | 112 CFM. Rated for 125 PSIG at 112 CFM. Unit is driven by a 25hp 3/60/208-230/460v 3550rpm motor. Equipped with a Kaeser Sigma Control 2 controller with RFID capability. Hours at time of inspection indicate approximately 42,000 run hours and 33,000 load hours. Enclosure is Type 1, designed for indoor industrial use. Nameplate data includes drive motor FLA of 63/59/30 amps (depending on voltage). Unit appears complete with integrated cooling and controls, as shown. Suitable for a wide range of industrial compressed air applications. Serial# 1124, built 2012.
MFR: Kaiser
Stock No.:
54050001Used JWI 800N32-49-25SYLS Filter Press – 49 Chamber, 528 Sq. Ft., 800mm Plates (
Used- JWI Filter Press, Model 800N32-49-25SYLS. Total chamber volume of 25 ft (0.707 m) across 49 chambers. It features a chamber volume of 0.5 ft (0.01 m) and a total filter area of 528 ft (49 m), using 800 mm square plates with Goretex filter cloth. Approximately (49) polypropylene Plates. The overall length and width of the press are 218.63 inches (5553 mm) and 53.29 inches (1354 mm), respectively. The press uses an air-powered hydraulic pump and requires a maximum air supply of 80 scfm at 100 psi. It is equipped with a 6" bore x 24" stroke (152 mm x 610 mm) hydraulic cylinder, with a maximum hydraulic closing pressure of 4100 psi (283 bar). The system includes a 4.5-gallon (17.0 L) reservoir and uses Rykon All Weather Type-46 hydraulic oil. The feed pump pressure is rated at 100 psi, and the manifold style is air blow with precoating capability. Optional features include an auto pump control system, semi-auto shifter, drum disposal system, and Bombay doors. Serial# F05045. This unit was new in 2017. ** PLATES ARE STORED INSIDE**
MFR: JWI
Stock No.:
75822Industrial Hammermill for Sale - Raymond 18” High-Performance Mill
Used- C.E. Raymond 18" High-Speed, Air-Swept, Vertically Arranged Hammermill. Designed for ultra-fine grinding. Unit includes vertical shaft that carries all rotating internal components, rotor, (requires hammers and whizzer blades) fan blades, mill base, mill body with liners, screw feeder assembly, upper bearing housing, lower bearing housing, 25 hp drive motor.
MFR: Raymond
Stock No.:
75823Used - C.E. Raymond 18” High-Speed Air-Swept Hammermill, 25 HP Motor
Used- C.E. Raymond 18" High-Speed, Air-Swept, Vertically Arranged Hammermill. Designed for ultra-fine grinding. Unit includes vertical shaft that carries all rotating internal components, rotor, (requires hammers and whizzer blades) fan blades, mill base, mill body with liners, screw feeder assembly, upper bearing housing, lower bearing housing, 25 hp drive motor.
MFR: Raymond
Stock No.:
54687045Used Groen Inclined Agitated Kettle, 250 gallon, Model INA-250, 316 stainless steel, vertical. Approximately 54" middle diameter x 45" deep. Full jacket, upper jacket rated 40 PSI, lower jacket rated...
Used-Groen Inclined Agitated Kettle, 250 gallon, Model INA-250, 316 stainless steel, vertical. Approximately 54" middle diameter x 45" deep. Full jacket, upper jacket rated 40 PSI, lower jacket rated 100 PSI at 338°F. Mounted on 4 carbon steel legs. National Board #104598. Serial #104598.
MFR: Groen
Stock No.:
54687046Used 250 gallon Precision Stainless Inc 316L reactor body with 304L side jacket. Dished top and bottom. Vessel is 36" diameter x 58" SS. Vessel on four legs. The vessel is rated for up to 45 PSIG @ 3...
Used-250 gallon Precision Stainless Inc 316L reactor body with 304L side jacket. Dished top and bottom. Vessel is 36" diameter x 58" SS. Vessel on four legs. The vessel is rated for up to 45 PSIG @ 350 degrees F & 29.92" Hg Vacuum and the jacket is rated for up to 75 PSIG @ 350 degrees F. Mfg. National Board number 1907. Serial number 7869-4. Jacket nozzles two 2" threaded couplings and two 3/4" threaded coupling. Side nozzles are one 3" tri clamp and one 1-1/2" tri clamp with valve. Bottom has 2" Tank Mate for level monitoring, one 1-1/2" tri clamp, and one 1/2" coupling. Top nozzles are one 18" hinged manway with 3" blinded triclamp nozzle on the lid, one 2" tri clamp nozzle with modified flange attachment, one 2" blinded tri clamp and four - 1-1/2" tri clamp with three with blinds. 90" OAH.
MFR: Precision
Stock No.:
54687128Used Ingersol-Rand Centac Air Compressor Model CH5-18M1H, 250 HP Reliance Electric motor, 460, 3 phase. Serial #M89-5038 built in 1989. Unit is 1817 cfm, 14.0 PSIA, 30 PSIG, 3574 RPM, 95 degree F. Bo...
Used-Ingersol-Rand Centac Air Compressor Model CH5-18M1H, 250 HP Reliance Electric motor, 460, 3 phase. Serial #M89-5038 built in 1989. Unit is 1817 cfm, 14.0 PSIA, 30 PSIG, 3574 RPM, 95 degree F. Both nozzles are 8". Unit has hydraulic pump and control panel. One nozzle has 8" Badger Industries expansion joint. Overall dimensions are 60" wide x 74" tall x 90" long.
MFR: Ingersoll-Rand
Stock No.:
54687129Used Ingersol-Rand Centac Air Compressor Model CH5-18M1H, 250 HP Reliance Electric motor, 460, 3 phase. Serial #M89-5037 built in 1989. Unit is 1817 cfm, 14.0 PSIA, 30 PSIG, 3574 RPM, 95 degree F. Bo...
Used-Ingersol-Rand Centac Air Compressor Model CH5-18M1H, 250 HP Reliance Electric motor, 460, 3 phase. Serial #M89-5037 built in 1989. Unit is 1817 cfm, 14.0 PSIA, 30 PSIG, 3574 RPM, 95 degree F. Both nozzles are 8". Unit has hydraulic pump and control panel. Overall dimensions are 60" wide x 74" tall x 90" long.
MFR: Ingersoll-Rand
Stock No.:
53225001Cumberland 32" x 50" Model 3250 HOG Granulator.
Used- Cumberland Model 3250 HOG Granulator. 32" x 50" Feed throat. 36-knife hog rotor, 2 bed knife (4 pcs raised one side). Dual fly-wheels. Belt driven rotor powered by a 250 HP, 885 RPM, 3/60/460-volt motor. Tray style in-feed hopper. 10" OD airveyor discharge. Mounted on common plate base. Starter and controls for granulator and blower are not included. Rotor has two (2) damaged knife seats. Serial# 57050-754-R.
MFR: Cumberland
Stock No.:
40958029Used Onan 250 kW Natural Gas Generator | Model 250GEBC | Cummins G1A855G3 Engine | 480V | 570 Hours (2005)
Used- Onan 250kW Generator Model #: 250GEBC RPM: 1800 Year: 2005 Engine # 25302574 Engine Model# G1A855G3 Phase: 3 Volts: 480 HZ: 60 Hours: 570 Natural Gas. Built in 2005, this generator operates at 1800 RPM and supports a three-phase electrical system. It delivers a voltage output of 480 volts at a frequency of 60 Hz, making it suitable for various heavy-duty tasks and ensuring efficient energy distribution across demanding environments. Driven by a Cummins Engine, Model G1A855G3, Serial# 25302574.
MFR: Onan
Stock No.:
49479009Used DCI 2,500 Pressure Wall Processor – 316L Stainless Steel Mix Tank
Used- DCI 2,500 Pressure Wall Processor, Gallon Dome Top, Cone Bottom, 316l Interior. Offset Vertical Agitator. Double Sprayball. 2" Outlet. 23 Sq. Ft. Jacketed On Lower Sidewall Only. Approximately 88" Diameter X 183" High. Top Manway. Stainless Steel Legs with Adjustable Feet.
MFR: DCI