Stock No.:
49662009Used Alfa Laval NX-6541 "SanX" Solid Bowl Decanter Centrifuge – Built 2020
Used- Alfa Laval NX-6541 "Sanx" solid bowl decanter centrifuge, SanX model, stainless steel construction (product contact areas), max bowl speed 3100 rpm. 25" diameter x 98.75" long bowl. 360 degree solid discharge ports, 9" single lead conveyor , base, casing, gearbox 127/1 ratio, 75 hp main drive motor, 30 hp backdrive motor, control (460/3/60). Built 2020
MFR: Alfa Laval
Stock No.:
50366004Used Fitzpatrick FitzMill DKAS012 Stainless Steel Hammer Mill – 25 HP Pharmaceutical & Food Grade Mill
Used Fitzpatrick FitzMill DKAS012 Stainless Steel Hammer Mill 25 HP Pharmaceutical & Food Grade Mill. Chamber: 12.5" wide x 15.37" long, with center screen support bar, screens not included. 32 milling blades, fixed blunt flat-edge/knife edge, reversible. 10" flange inlet. 16" x 19" oval discharge with banding groove, 75.5" above base elevation. Driven by a 25 HP, 3/60/230/460 Volt, 1770 RPM motor. Welded stainless steel portable base frame (4" box tubing), 42"W X 48"L. Serial# 9084.
MFR: Fitzpatrick
Stock No.:
50467054Used Roark Enterprises 25-Gallon Stainless Steel Receiver Tank – 150 PSI, Vacuum Rated
Used- Roark Enterprises 25 Gallon Receiver Tank, Stainless Steel Construction. Approximately 16" diameter x 32" straight side, dish top and bottom. Internal rated 150 psi and full vacuum at 150 degrees F. Serial# 95.709.ME1, National Board# 460.
MFR: Roark Enterprises
Stock No.:
54687098Used Waukesha model MS stainless steel horizontal colloid mill. Serial number 1000002790489. It has a conical grooved rotor and stator. The inlet and outlet are 2" sanitary threaded. This unit is all...
Used-Waukesha model MS stainless steel horizontal colloid mill. Serial number 1000002790489. It has a conical grooved rotor and stator. The inlet and outlet are 2" sanitary threaded. This unit is all mounted on a stainless steel base. The mill is driven by a 25 hp, 3530 rpm electric motor. 460 vac 3 ph power required.
MFR: Waukesha
Stock No.:
54687137Used Shar 25 hp high speed disperser. Singal speed. Mixer has a stainless steel shaft and blade. Blade is 12" diameter on 2.25" diameter shaft x 44" long. It has a hydraulic power unit. Requires 22...
Used-Shar 25 hp high speed disperser. Singal speed. Mixer has a stainless steel shaft and blade. Blade is 12" diameter on 2.25" diameter shaft x 44" long. It has a hydraulic power unit. Requires 220/440 vac 3 ph electrical supply. Lift motor is 1/2 HP 208-220/440 volts, 3 phase. Overall size 32" wide x 80" long x 82" tall.
MFR: Shar
Stock No.:
54687138Used 25 hp high speed disperser. This unit is probably a Shar. Mixer has a stainless steel shaft and blade. Blade is 12" diameter on 2.25" diameter shaft x 43" long. It has a hydraulic power unit. T...
Used-25 hp high speed disperser. This unit is probably a Shar. Mixer has a stainless steel shaft and blade. Blade is 12" diameter on 2.25" diameter shaft x 43" long. It has a hydraulic power unit. The motor is tagged for harardous locations. Requires 220/440 vac 3 ph electrical supply. Overall size 32" wide x 80" long x 84" tall.
Stock No.:
54687067Used Meprotec Komet Steril Inline vertical coloid mill. Constructed of 316 stainless steel. It has a 250 liter(66 gallon) mixing tank. This homogenizer is equipped with mechanical gap distance adj...
Used-Meprotec Komet Steril Inline vertical coloid mill. Constructed of 316 stainless steel. It has a 250 liter(66 gallon) mixing tank. This homogenizer is equipped with mechanical gap distance adjustment from 3 mm to 18 mm. Homogenizer has a 2" twist style impeller. Homogenizer also has a liquid seal system. Has a 2" sanitary discharge that goes to a pneumatically operated 3 way ball valve for discharge and recirculation options. Top has a 2" sanitary fitting for recirculating material, a 3" sanitary fitting for dry material infeed and a 2.5" sanitary fitting liquid material infeed. Unit is belt driven by 25 hp electric motor. Requires 460 vac 3 ph electrical supply. Hopper and mill are supported by 3" arms with load cells. Unit also has a pneumatic 2" 3 way diverter valve. No name plate data available. Manual available. Good Condition
Stock No.:
54687070Used This Cowles disperser has a stainless steel shaft measuring 53" with a blade diameter of 17". Unit is equipped with an air over oil lift. Driven by a 50/25 hp, 1770/885 rpm motor that requires 4...
Used-This Cowles disperser has a stainless steel shaft measuring 53" with a blade diameter of 17". Unit is equipped with an air over oil lift. Driven by a 50/25 hp, 1770/885 rpm motor that requires 460 vac, 3 ph electricity. Overall dimensions are approximately 50" w x 100" l x 84" h. Motor is tagged for hazardous location however there is an attached juction box that is not.
MFR: Cowles
Stock No.:
54281001Used Kaeser ASD 25 Rotary Screw Air Compressor | 25 HP | 112 CFM @ 125 PSIG | Si
Used Kaeser ASD 25 Rotary Screw Air Compressor | 25 HP | 112 CFM @ 125 PSIG | Sigma Control 2. Unit is driven by a 25hp 3/60/208-230/460v 3550rpm motor. Equipped with a Kaeser Sigma Control 2 controller with RFID capability. Hours at time of inspection indicate approximately 39,567 run hours and 30,258 load hours. Enclosure is Type 1, designed for indoor industrial use. Nameplate data includes drive motor FLA of 63/59/30 amps (depending on voltage). Unit appears complete with integrated cooling and controls, as shown. Suitable for a wide range of industrial compressed air applications. Serial# 1125, built 2012.
MFR: Kaiser
Stock No.:
54281002Kaeser ASD 25 Industrial Rotary Screw Air Compressor with Sigma Control 2 | 25 H
Kaeser ASD 25 Industrial Rotary Screw Air Compressor with Sigma Control 2 | 25 HP | 112 CFM. Rated for 125 PSIG at 112 CFM. Unit is driven by a 25hp 3/60/208-230/460v 3550rpm motor. Equipped with a Kaeser Sigma Control 2 controller with RFID capability. Hours at time of inspection indicate approximately 42,000 run hours and 33,000 load hours. Enclosure is Type 1, designed for indoor industrial use. Nameplate data includes drive motor FLA of 63/59/30 amps (depending on voltage). Unit appears complete with integrated cooling and controls, as shown. Suitable for a wide range of industrial compressed air applications. Serial# 1124, built 2012.
MFR: Kaiser
Stock No.:
54265001Unused Wildcat 25 kW Natural Gas/Propane Generator | Model BS0025LPAO | Kubota WG1605 Engine | Built 2022
Unused Wildcat 25 kW Natural Gas/Propane Generator | Model BS0025LPAO | Kubota WG1605 Engine | Built 2022. Rated 25kW. 42.5kW (approx. 56 HP) at 3600 RPM. Meccalte model ECP28 L4 alternator. On casters. OAD: 60" x 30" W x 52" H.