Cummins Standby Natural Gas Generator, Model 235GFBC

Used Cummins Standby Natural Gas Generator, Model 235GFBC, rated at 235 kW and housed in a weather-protective enclosure. This generator is powered by a Cummins GTA855G3 natural gas engine, serial number 25303054, producing approximately 354 hp. Unit is configured for 3 phase, 60 Hz, 480 V operation at 1800 RPM and was built in 2005. The generator currently shows approximately 920 operating hours, making it a low-hour standby power unit well suited for dependable backup power applications.

MFR: Cummins

Industrial Rotary Fan Press – 24" Model RFP24S, Epoxy Coated, Pneumatic & Polymer System

Unused- Prime Solution 24" Rotary Fan Press, Model RFP24S. 304 stainless steel filter plates and support rotor; Epoxy coated carbon steel housings, base, and moveable dewatering platform (on adjustable V-track casters); In-line full port pneumatic mixer w/ 4-port injection ring; PVC sludge retention manifold with clear site tube cleanout; pneumatic sludge by-pass control valve; sludge feed magnetic flow meter; Rotary lobe sludge pump; Air compressor with receiver; Emulsion polymer feed/blend system with integrated controls; 1.5 HP direct gear drive system. Includes touch screen control panel, 3/60/575V. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Prime

Stainless Steel 24” U-Trough Screw Conveyor with Thermal Heating & Cooling

Used- S. Howes U-Trough Thermal Processing Screw Conveyor, Model 24U24-JS. 24" diameter screw, 24' Long inside dimension. Oversized 16" diameter shaft pipe, Journals thru-bored to allow heating fluid flow through shaft. 22' Overall jacket length; 14.9 psig design pressure. Designed for thermal fluid heating/cooling media or low pressure steam. 316 stainless steel construction in product contact and jacket areas. 3" inlet/outlet on main body; 1" on heated/cooling screw. Fulton control panel 120-VAC, 1-Phase, 60HZ with 6 digital PID temperature controllers. 3 x 3" pneumatic valves for inlet fluid control on main body of screw conveyor. 1 x 1" pneumatic valve for inlet fluid control on screw. 10 x 3" manual gate valves for support plumbing, Sectional covers. Driven by a 15 hp, 3/60/460V motor. Machine # 117390, New in 2012. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: S Howes

Used Kason 24" Portable Stainless Steel Screener | Model K-24-2-SS-P | 1/3 HP Motor | Includes Decks, Rings & Screens

Used Kason 24" Portable Stainless Steel Screener, Model K-24-2-SS-P, 1/3 HP Motor. Includes Decks, Rings & Screens. Driven by a 1/3hp, 3/60/460 volt, 1140rpm motor. Mounted on carbon steel cart with casters. Serial# KC-1045.

MFR: Kason

Used Carrier Ampli-Flow Vibrating Feeder – Model FC2410051/4304, Stainless Steel

Used- Carrier Vibrating Equipment Ampli-Flow Vibrating Feeder, Model FC2410051/4304, Stainless Steel. 24" wide x 72" long, single deck with scalper type insert. Driven by an approximate 1 hp motor.

MFR: Carrier

Denver Sala Holo-Flite Dryer D24-24-6 | Refurbished Indirect Thermal Sludge Dryer System

Fully Refurbished Denver Sala Holo-Flite Dryer, Model D24-24-6. Indirect thermal sludge drying processor with dual holo-flite screws and vapor dome. Fully refurbished with new components. 316 Stainless Steel contact surfaces. (2) Screws 24'' diameter x 24' long, rated for 150 psi at 650 degrees F. Non-contact carbon steel exterior trough jacket rated 30 psi at 650 degrees F, Hot Oil or Water/Glycol heating medium. 10 HP Baldor motor. Contains Sumitomo Cyclo 6000 gearbox. Tomaso Built process control system provides fully automated operation of the Denver-Sala D24-24-6 dryer, ensuring consistent product quality, maximum throughput, and equipment protection across variable feed conditions; Product Temperature Protection, Residence Time Control, Feed Interlock System, Dynamic Safety Overrides, Vapor & Pressure Control, Mechanical Protection, Thermal Oil Control, Recipe-Based Operation, CIP Mode, HMI Interface. Fully refurbished 12/23/2025.

MFR: Denver

Used Sweco SS24Y44A3P3WCXB Stainless Steel Vibratory Screener – 24" Single Deck Separator

Used- Sweco Stainless Steel Screener, Model SS24Y44A3P3WCXB. 24" diameter. Single deck, 2 separation. (2) 6" diameter outlets. Driven by 1/3 hp motor, 1145 rpm, 460V. Serial# 953894-A08/10. Mounted on stand.

MFR: Sweco

Used Alar Auto-Vac Rotary Vacuum Drum Filter System – 2' x 2', Model 220

Used- 2' x 2' Alar "Auto-Vac" Rotary Vacuum Drum Filter System. Drum measures 2' diameter x 2' long. Model Auto-Vac 220. Carbon steel drum. With motorized advancing knife discharge. On base with poly tank and .3 HP Lightnin Agitator drive, shaft and prop, 5 HP Atlantic Fluidics Vacuum Pump and receiver pump. Filter agitator with .3 HP drive. .5 HP drum drive gear reduced, chain driven with guard. Unit looks to be in good condition.

MFR: Alar Engineering

Complete Sheeting Line – 24" Cooling Stack, Puller Cutter, Trim Press & Heater

Used- 24" Vinyletech Abbottstown Sheeting Cooling Stack, Model D9060. Approximately 24" wide x 12" diameter cooling drum, with 21" wide x 12" diameter mating drum, 24" wide x 8" diameter idler drum, serial# 22654, Vinyletech serial# 06181. includes Abbottstown puller cutter combo, model D9051, serial# 22952, Abbottstown trim press, model D8652, serial# 22657, 36 kw Compaheat heating system, model TC4-9-4P4 zone, 9 kw per zone, 208-230 volt, serial# 23010, 75 kva transformer.

Used Thomas Engineering Accela-Cota Coating Pan – Model 24-111, Stainless Steel

Used- Thomas Engineering Coating Pan, Model "Accela-Cota" 24-111, Stainless Steel. Approximate working capacity of 40 pounds. Serial # 24-328.

MFR: Thomas Engineering

Used Vector Freund Hi-Coater Coating Pan – Stainless Steel, 24" Diameter

Used- Vector Freund Hi-Coater Coating Pan. Stainless Steel coating chamber approximate 24" diameter x 16" deep with internal baffles. Unit includes blowers and control panel. New York Blower, Shop # C-5206-110, size 2104A05, driven by 5 hp, 3/60/230/460 volt, 3470 RPM motor, 3.5" diameter inlet, 3" outlet. Requires spray gun. Previously used in pharmaceutical application.

MFR: Vector/Freund

Used Reiter Automatik ASG300 Strand Pelletizer – 30-Knife Rotor, 10,500 lbs/hr Capacity

Used- Reiter Automatik Strand Pelletizer, Model ASG300. (30) Knife solid helical rotor, power roll feed with pneumatic tension control. Belt driven motor. Mounted on a base. Approximate rating up to 10,500 pounds per hour. Serial # 18002-3188.

MFR: Rieter