Used Werner & Pfleiderer UK17 Double Arm Mixer – 200 Gal, Stainless Steel Clad, Jacketed

Used- Werner & Pfleiderer Double Arm Mixer, Model UK17, Stainless Steel Clad 200 Gallon. Sigma tangential blades, jacketed bowl (bottom only) 43" front-back x 53" left-right x approximately 36" deep. Geared both ends. Set up for hydraulic tilt 7.5 hp, 220/440V, 1750 rpm. No base, no drive. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Werner & Pfleiderer

Used Carbon Steel Blower – 200 HP, 8" x 44" Housing, 12" x 36" Inlet

Used- Blower, Carbon Steel. Approximate 8" x 44" housing. Driven by a 200 HP, 460 Volt, 3570 RPM motor. 12" x 36" inlet, 8" x 16" outlet.

MFR: No

Electrically heated 200 Gallon Stainless steel Kettle

Used-Mix Kettle, 200 Gallon, Stainless steel. Electrically heated. With agitation.

Electrically heated 200 Gallon Stainless steel Kettle

Used-Mix Kettle, 200 Gallon, Stainless steel. Electrically heated. With agitation.

Used 200 Gallon Stainless Steel Vertical Mix Tank – Propeller Agitated, Leg Moun

Used 200 Gallon Mix Tank, Stainless Steel, Vertical. Approximately 48" diameter, 24" straight side. Flat top (with cover), Dished bottom. Clamp-on Top entering 3-blade propeller-style agitator, driven by a 3/4hp, 3/60/208-230/460 volt, 1725rpm washguard motor. Opening Top: 2", 2-1/2" diameter. 2" Center bottom outlet with 14" discharge height. Mounted on (3) stainless steel legs. No Manufacturer Tag.

MFR: Unknown

Used New York Blower (NYB) PLR Wheel Industrial Fan | Class 4 | 200 HP Leeson Motor | Built 2016

Used- NYB Fan. PLR wheel type. Class 4. Driven by a 200hp 3/60/460V, 17866 RPM, model C445T17DB18A Leeson motor. Built 2016.

MFR: New York Blower

Unused 2,000 Gallon 316 Stainless Steel Process Tank with Side Scrape Mixer

Unused TSI 2,000 Gallon Vertical Stainless Steel Agitated Tank. 316 Stainless steel. Approximately 84" diameter x 72" straight side. Dished top and bottom. Stainless steel top agitator bridge with top entering counter rotating anchor style agitator with side scrapers and inner flat bars (1/2" x 4"), bottom supported, driven by a 5//3 hp, 3 phase/60//50hz, 230/460 - 190/380 volt 1750/1450 rpm motor, and a 7.5//5 hp, 3phase/60//50hz, 230/460 - 190/380 volt, 1770/1475 rpm motor through a reducer 8.48:1 ratio. 18" Top manway. 3" Center bottom outlet, approximate 56-1/4" discharge height. Mounted on (4) stainless steel legs. Drawing available. Manufactured by (TSI) Todd Street Inc Stainless Steel Fabricators. Overall dimensions approximately 84" x 96" x 192"tall. Ideal for food, cosmetic, pharmaceutical, chemical, and specialty product processing applications.

Unused Generac 2000 kW Diesel Generator | Mitsubishi S16R Engine 480V Industrial Power Unit

Unused- Generac Generator, Model SD20000KG02654D18APYY2. Rated 2000 kW. Serial# 3016245459. 480 volts. Mitsubishi engine, model S16R-Y2PTAW2-1, Serial# 28089. Built 2024. 2 hours (load bank testing).

MFR: Generac

2000 Gallon Hastelloy C-276 mix tank

Used- 2000 Gallon Hastelloy C-276 mix tank. Dish top and bottom. Built By Addison Fab. 6' dia. x 9' T/T. Lightnin 3/4 HP mixer, 208-220/440 volt. Lug mounted. Rated 10" WC @ 250 Deg.F. Alloy

Used Micro Air RP8 Dust Collector – High Capacity Industrial Air Filtration System

Used Micro Air Model RP8 Dust Collector. Up to 2,000 square feet of filter area. (8) Cartridges. 10 HP Blower. 3,500 to 5,000 CFM (depending on set-up). 3/60/208/230/460V.

MFR: Micro Air

Buy Used Micro Air RP8 Dust Collector – 2,000 Sq Ft Filter Area System

Used Micro Air Dust Collector, Model RP8. Up to 2,000 square feet of filter area. (8) Cartridges. 10 HP Blower. 3,500 to 5,000 CFM (depending on set-up). 3/60/208/230/460V.

MFR: Micro Air

Used Walker 2,000 Gallon Stainless Steel Processor Kettle | Model PZ-C3-PV | Jacketed | 3 HP Scrape Agitator

Used Walker 2,000 Gallon Stainless Steel Processor Kettle | Model PZ-C3-PV | Jacketed | 3 HP Scrape Agitator. Dished top, coned bottom. 96" OD x 72" straight side. Vessel is 10 PSIG at 250 degrees F. Jacket heat is 15 PSIG at 250 degrees F. Jacket cool is 100 PSIG at 100 degrees F. Anchor style scrape agitator, driven by a 3hp 3/60/230/460v 1760rpm motor through a reducer. Jacket has three zones with 2" valves. Jacket has 3" condensate with 4" outlet. Bottom has 3" tri clamp outlet. Top has 19" hinged manway with 4" sight glass. Nozzles on top are threaded 6", threaded 3", (2) 3" tri clamp and (2) 2" tri clamp. Serial# 75-7.

MFR: Walker