Used Bay Plastics Machinery BX16G Strand Pelletizer | 16" Wide 30 HP Plastic Pelletizer

Used- 16" Wide Bay Plastics Machinery Strand Pelletizer, Model BX16G. 30 HP. 65" infeed height. 16" (400mm) feed width. 12" (300mm) rotor diameter, Stellite-Tipped. 698 RPM rotor. 260 RPM feed. 4.25" diameter lower feed roll. 2.25" diameter upper feed roll. 30 HP Toshiba AC Motor with ABB Drive Control Panel. 460/3/60, 37.5A. 286T Frame, TEFC. ABB ACS550 Variable Frequency Inverter Drive. Safety Interlock System, Tool-less Cutting Chamber Entry, Slide-Out Discharge, Pneumatic Cutting Housing Lift. Pelletizer Start/Stop Buttons, Red Lion Digital Rotor RPM Readout, Speed POT, West 6100+ Temp Controller, Temp Controller On/Off Toggle Switch. Approximate Dimensions: 92" L x 64" W x 87" H. On Casters. 12848 Hours Showing On Meter.

MFR: BPM

Used CPM Cracking Mill – Model DPHX1600-84, 125 HP

Used- CPM Cracking Mill, Model DPHX1600-84. (2) pair of 16" Diameter x 84" Long chilled iron rolls. Carbon steel construction, corrugated rolls, manual roll adjustment. High volume pocket feeder. Driven by a 125hp 3/60/460V 1800rpm motor. Built 2020. Previously used on soybeans.

MFR: CPM

Used Hobbs 16" IBC Die – Industrial Extrusion Die, Heater Bands Missing

Used- Hobbs 16" IBC die. Missing heater bands.

MFR: Hobbs

Used Hysep High Speed Decanter Centrifuge, Model AD0918

Used- Hysep High Speed Decanter Centrifuge, Model AD0918. 16 x 72 Big Bowl, 4300 RPM. Mfg. 1999.

MFR: Hysep

Used Hutchinson Hayes 5500 High-G Centrifuge | 316 SS Wetted Parts | 3700 RPM | 230 GPM (52 m³/hr) | 16" x 55" Bowl | Control Panel | Mounted on Carbon Steel Frame

Used Hutchinson Hayes High-G Centrifuge Model 5500. 316 Stainless Steel Wetted Parts. Max Bowl Speed 3700 RPM, Max Operating Temp 275 F, 52 M3/hr max flow. 230GPM. Approximately 16" diameter x 55" long bowl. Serial# 995500-220. Mounted Control Panel, Centrifuge is mounted on carbon steel frame.

MFR: Hutchinson Hayes

Used Fitzpatrick Chilsonator Model 16Lx20D with HAS030 Comminutor Mill – Stainless Steel

Used Fitzpatrick Chilsonator Model 16Lx20D with HAS030 Comminutor Mill, All stainless-steel wetted parts. The Chilsonator uses dual 16" x 20" radial cored rolls with controlled hydraulic pressure and feed augers to compact powders into fees screws for improved flow and reduced dust. These feed screws are then processed by the HAS030 Comminutor Mill, which employs interchangeable screens and a hammer/knife design for precise particle size reduction. This integrated system delivers efficient compaction, milling, and screening for pharmaceutical, chemical, food, and specialty material applications. (A 102-1/2" , 5 DECK SCREENER IS NOT INCLUDED WITH THIS SYSTEM. AARON WILL FACILITATE LOADING INCLUDED IN THE FINAL PRICE). Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Fitzpatrick

Rebuilt Flottweg Z4E/4-901g Solid Bowl Decanter Centrifuge – Alloy 2.4602, 3200 RPM, 30 kW

Rebuilt- Flottweg Z4E/4-901g Solid Bowl Decanter Centrifuge. Alloy 2.4602 construction (product contact areas); maximum bowl speed 3200 rpm; approximate single lead conveyor with welded hard facing; Back drive with powerpack; feed pipe; lubrication system; adjustable liquid plate dams; Approx. 30 KW; 400/3/50/2956 rpm ABB main drive motor with frame/casing; vibration isolators; safety guards and control. New 2001. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Flottweg

Used Alfa Laval PM-3600 Super-D-Canter Centrifuge | 3,500 RPM | Industrial Liquid-Solid Separation

Used- Alfa Laval / Sharples PM-3600 Super-D-Canter Centrifuge. 316 Stainless Steel construction (product contact areas), maximum bowl speed 3500 rpm, 4-1/2" single lead conveyor, liquid plate dams, gearbox 125:1 ratio, base, casing, approximate 37kw (49.6hp) main drive motor (380/50/3), back drive moto. Mounted on a carbon steel sub-frame with vibration isolators, safety guards.

MFR: Sharples

Used 160 Gallon Feldmeier Reactor, 316L stainless steel construction

Used-160 Gallon Feldmeier Reactor, 316L stainless steel construction, 320 grit and electropolished internal, approximately 48" diameter x 10" straight side, hinged dish top, hemispherical bottom, rated 50 psi and full vacuum at 350 f internal, jacketed for 150 psi at 350 f, anchor agitator with sidewall scrappers, driven by 7.5 hp motor drive, and mechanical seal, bridge mounted tilt out agitation system with hydraulic cylinder and onboard 2 hp hydraulic pump, top mounted baffle, (3)3", 2", (4)1.5" top ports, 2" bottom outlet, on 4 stainless steel legs.

MFR: Feldmeier

Buy Pre-Owned Coperion ZSK 160 Twin Screw Extruder — 8 Barrel Sections + Gear Re

Used- Werner Pfleiderer / Coperion Model ZSK 160 Twin Screw Extruder. Co-Rotating. Project No 87-3593. 8 barrel sections. Approximate 14' long screws. Approximate 26:1 L/D. Electrically heated. Gear Reducer with oil cooling system. 2500 HP GE Motor, 3 phase, 4160 volts, reportedly rebuilt by IPS in 2017. Screen changer. Die plate. Werner & Pfleiderer underwater pelletizer. Control panel with Allen Bradley Logix5581E PLC. Associated spare parts.

MFR: Werner & Pfleiderer

Unused Howden ExVel Turbo Fan HBXrG-20/675-LG0 – High-Performance Industrial Fan

Unused- Howden ExVel Turbo Fan, Model HBXrG-20/675-LG0. Maximum inlet volume; 3.18 m3/s, 6738.99 ACFM. Maximum pressure rise; 290.96 kPa, 42.20 PSI. Maximum inlet temperature; 176.7 C, 350.1 F. Maximum outlet temperature; 196.0 C, 384.8 F. Maximum impeller power; 1196 kW, 1603.9 HP. Nominal operation speed; 5681 rpm. Design temperature; 230.0 C, 446.0 F. Design pressure; 1878 kPa(a), 272.2 PSI. Siemens 1500 series PLC and Bently Nevada 3500 monitor system. Serial # NFF00019-10, Built 2020.

IN STOCK- Paul O. Abbe Model RB-165 Ribbon Blender. New.

NEW & IN STOCK- Paul O. Abbe Model RB-165 Ribbon Blender. In -Stock .165 Cubic Foot working capacity. 180 Cubic Foot total volume. Type 304 stainless steel polished. Food grade. All stainless steel construction. Trough dimensions: Approximately 53.6" wide x 110.3" long x 58.3" deep. Internal double spiral ribbon. Packing glands and pillow block bearings. 50 hp SEW Euro drive hollow bore design. 230/460 volt, 1775 rpm, 3/60 with approximately output 28 rpm. Top cover with hold down clamps and limit switch. Center Loading cover with welded safety grate, 30" wide x 50" long. Approximate 4.7" wide x 19.7" flush air operated plug valve. Discharge housing is approximate 20.5" wide x 28.4" long. Approximately 4" discharge height. Approximate weight 10,164 pounds. Approximate overall dimensions: 74" wide x 167" long x 85.5" high. Controls are available upon request.

MFR: Paul O Abbe