Unused Anhydro SCAN-VIBRO Pilot Fluid Bed Dryer – Stainless Steel Pilot Drying System with Mobility (2025)

Unused- Anhydro SCAN-VIBRO Pilot Fluid Bed Dryer, Model Pilot Plant Fluid Bed. Effective fluid bed area: 8.6 Sq. feet (0,8 m2). Stainless steel. 200cm (78.74") length 40cm (15.74") Diameter Tube. 9.75" (250 mm) diameter inlet tube. 11.7" (300 mm) diameter outlet tube. Frame mounted. ON 4 wheels. Control panel. Overall dimensions 98" (3000 mm) L x 26" (800 mm) W x 72" (2200 mm) H, Weight 1 tonnes. New year 2025. Our Freight specialists can assist with any customs documentation to insure a smooth transition.

MFR: Anhydro

Used Precision Stainless 60 Liter Reactor – 316L SS, Vertical, Jacketed

Used- Precision Stainless Reactor, 60 Liter capacity, 316L Stainless Steel, Vertical. Approximately 16" upper diameter, 8" lower diameter x 18" straight side. Dished top and bottom. Internal rated 45psi at -20 to 356 degrees F, 316L stainless steel jacket rated 90psi at -20 to 356 degrees F. Clamp down top cover, openings top: (4) 3", (4) 1-1/2", 2" center bottom outlet, 1-1/2" side bottom outlet. Includes spray ball. Provision for bottom agitator, missing motor. Side lug mounted. Serial# PJS0010007, National Board# 974, built 2011.

MFR: Precision Stainless

Precision Stainless Reactor for Sale – 60L Capacity, Jacketed, Agitator Provision

Used- 60 Liter capacity Precision Stainless Reactor, 316L Stainless Steel, Vertical. Approximately 16" upper diameter, 8" lower diameter x 18" straight side. Dished top and bottom. Internal rated 45psi at -20 to 356 degrees F, 316L stainless steel jacket rated 90psi at -20 to 356 degrees F. Clamp down top cover, openings top: (4) 3", (4) 1-1/2", 2" center bottom outlet, 1-1/2" side bottom outlet. Includes spray ball. Provision for bottom agitator, missing motor. Side lug mounted. Serial# PJS0010006, National Board# 973, built 2011.

MFR: Precision Stainless

Unused Industrial Inline Colloid Mill – IKA MK 2000/50, Stainless Steel

Used- IKA Works Model MK 2000/50 Stainless Steel Inline Colloid Mill. Rotor speed 1265 RPM. Max throughput 80,000 L/hr. Driven by 150hp, 3/60/460 Volt, 1785 rpm TEFC Motor. 8" Inlet, 6" outlet. Flowserve 6L mechanical seal reservoir. Mounted on a painted carbon steel base. No Serial# plate. Current parts machine, can be completed for additional cost.

MFR: IKA Works

Used 150-Gallon Stainless Steel Mix Tank – Lightnin Agitator, 316 SS, Industrial

Used- Stainless Steel Mix Tank, Approximate 150 Gallon, 316 Stainless Steel, Vertical. Approximate 42" diameter x 22" straight side. Ellipsoidal top and bottom heads. Top entering Lightnin agitator, model XJC30, serial# 2863219, 3-blade prop on 1" diameter shaft, driven by a .3hp, 3/60/208-230/460 volt, 1725 rpm motor. Openings top: 16" manway with cover, 5" for agitator, 4", (2) 2", (2) 1.5". 3" Side bottom outlet, 3" bottom outlet, approximate 18" discharge height. Mounted on frames with (3) legs. No manufacturers tag.

Used Vecoplan RG62/150 UXL Shredder – 150 HP, 20" Rotor, 74 Cutters, OEM Controls, Gravity Discharge – 2010

Used- Vecoplan Model RG62/150 UXL Shredder. 20" diameter rotor with 74 40mm cutters. Single counter knife position. Rotor is powered by a 150 HP 460-volt motor thru a Siemens gearbox. Shredder is mounted on a 15.5" tall riser base and has a gravity discharge height of 40.5". 7.08 kw 480v hydraulic ram pump. Has 1" holes screen installed. Includes original OEM control panel. Ran foamed HDPE skids. Serial 12434010. built 2010.

MFR: Vecoplan

Used Nelmor RG2257 Granulator – 22" x 57" Feed, 150 HP, Clam Shell Chamber, Airveyor Discharge, OEM Controls

Used- Nelmor Model RG2257 Granulator. 22" x 57" feed throat. 5 knife (15 pcs) open rotor with 2 bed knife positions (6 pcs). Top in-feed. 150 HP 460-volt 1785 RPM Bador Super-E motor. 10" OD Airveyor discharge. Clam shell split chamber is powered by 3 HP hydraulic pump. Drop down Airveyor is hydraulically operated by a manual pump. 3,000 lbs. per hour rated average through put. Includes OEM control panel.

MFR: Nelmor

Used Lee RA-150 150-Gallon 316 Stainless Steel Jacketed Kettle with Scrape Surface Agitation

Used Lee RA-150 150-Gallon 316 Stainless Steel Jacketed Kettle with Scrape Surface Agitation. Serial Number 84164-1-4. 316 Stainless Steel construction. Jacket Rated 90PSI at 332 Deg F, 90PSI at -20 Deg F at 90PSI. Inside dimensions: 42" ID x 40.5" deep. Center bottom outlet 2 " ferrule for Cherry Burrell valve (no valve). Single motion scrape surface agitation w/1.5HP drive and baffle. Two-piece cover. Has Thermometer and Sprayball. Built in 2014.

MFR: Lee Ind

Used-Gillette Standby Generator, Model SP-1500. Rated 150kW. Liquid propane natural gas fueled. Single Phase, 120/240V. 626 hours. Has been load tested.

Used Hamilton Style CW 150-Gallon Tilting Kettle – 316 Stainless Steel, Jacketed

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel. Approximate 44" diameter x 40" deep. Open top, jacketed hemispherical bottom. 304 Stainless steel jacket rated 100 psi at -20 to 328 degrees F. Top entering angled anchor style agitator with scrapers, driven by a 2 hp, 3/60/208-230/460 volt, 1750 rpm gear motor, approximate 44.32 to 1 ratio (no gearbox tag). Air operated agitator tilt, motorized bowl tilt, pouring lip. 3" Center bottom outlet with valve. Mounted on a stainless steel frame with (3) leg. National Board # 17. Serial # F-4662-3. Built 2002.

MFR: Hamilton

Industrial Hamilton CW 150-Gallon Steam Jacketed Kettle – Motorized Tilt

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel. Approximate 44" diameter x 40" deep. Open top, jacketed hemispherical bottom. 304 Stainless steel jacket rated 100 psi at -20 to 328 degrees F. Top entering angled anchor style agitator with scrapers (missing 1 scraper), driven by a 3 hp, 3/60/208-230/460 volt, 1750 rpm gear motor, approximate 44.32 to 1 ratio (no gearbox tag). Air operated agitator tilt, motorized bowl tilt, pouring lip. 3" Center bottom outlet with valve. Mounted on a stainless steel frame with (3) leg. National Board # 278. Serial # F-5817-2. Built 2004.

MFR: Hamilton

Hamilton 150-Gallon Tilting Kettle – Stainless Steel, Steam Jacketed, Food-Grade

Used- Hamilton Style CW Tilting Kettle, 150 Gallon, 316 Stainless Steel. Approximate 44" diameter x 40" deep. Open top, jacketed hemispherical bottom. 304 Stainless steel jacket rated 100 psi at -20 to 328 degrees F. Top entering angled anchor style agitator with scrapers (missing 2 scraper), driven by a 2 hp, 3/60/208-230/460 volt, 1750 rpm gear motor, approximate 44.32 to 1 ratio. Air operated agitator tilt, motorized bowl tilt, pouring lip. 3" Center bottom outlet with valve. Mounted on a stainless steel frame with (3) leg. National Board # 279. Serial # F-5817-3. Built 2004.

MFR: Hamilton