Used Plan-It Packaging Neptune HGMAK Duplex Horizontal Bagger with Scale & Nitrogen

Used- Plan-It Packaging Systems Horizontal Bagger with Combination Scale and Nitrogen Generator, Model Neptune HGMAK Duplex. Gas flush, duplex system. Servo controlled.

MFR: Plan It Packaging Systems

Used Baileigh PT-44-VH Plasma Cutting System – 4' x 4' Table, Auto Height Detection, Water-Cooled, 1" Steel Capacity

Used- Baileigh Plasma Cutting System Consisting Of: Baileigh PT-44-VH Plasma Table; 4' x 4' cutting area; Automatic Height Detection; Water Assist Cooling; Industrial Down Draft Table; High Quality Stepper Motors on X and Y Axis; Fully Welded Main Frame Will Support Up to 1" Thick Mild Steel; Industrial Cable Track; Hardened, Ground and Polished Slide Ways; Control Console with Hand Held Pendant. 220 volt, 60 hertz; Built 2014.

Complete Plastics Recycling & Compounding Manufacturing Plant Featuring Multiple Twin Screw Extrusion Lines, Recycling Systems, Silos, Laboratories & Industrial Real Estate

Used- Complete Plastics Compounding Extrusion Plant consisting of: (1) Leistriz ZSE 60-40D MAXX Twin Screw Extrusion Line output 900-1200 kgs per hour, (1) Coperion ZSK 70 SC Twin Screw Extrusion Line output 800-1000 per hour, (1) Noris ZSC 60 Twin Screw Extrusion Line output 650-800 kgs per hour, (1) Leistritz ZSE 60 MAXX-36D Twin Screw Extruder, (1) Lindner Micromat 2500 Single Roll Shredder, (1) Dreher Plastics Granulation & Washing System, (1) THM Recycling Solutions Granulation System, (1) Zeppelin CMB 300 High Intensive Mixer.(6) Zeppelin Silos, (1) Pilot Plant, (2) Labs, (1) Injection Molding Machine, Workshop, Waste Water Treatment, Production and Storage buildings & much more. Previously used in a plastic recycling application. Can be purchased incl. buildings and land.

Used PMI GR-35D Dual Lane Multi-Pack Shrink Bundler – 15-20 CPM, Integrated Shrink Tunnel

Used- PMI Model GR-35D Dual Lane Multi-Pack Shrink Bundler. Equipped with right angle infeed with automatic 1:2 container lane divider and integrated shrink tunnel. Dual Main Rams. Production rates of 15- 20 cycles per minute. Maximum 20" film diameter. Allen Bradley SLC 5/05 PLC controls, A/B Panelview 1000 HMI screen, (6) A/B powerflex 70 and (3) A/B Ultra 3000i Servo drives for divider, divider conveyor and main ram. Pneumatic seal bar actuation. Includes integrated Shrink tunnel 36" wide with 13" total Height. 3/60/460 Volt.

MFR: PMI

Used PMI ST-601 Large Frame Shrink Tunnel | 18" x 48" Chamber | 41.5" Conveyor

Used PMI Model ST-601 Large Frame Shrink Tunnel. Chamber height: 18" x Width: 48". Conveyor width: 41-1/2", conveyor height: adjustable legs from 36" - 42". Overall dimensions 13-1/2' x 80". 3/60/480 volt.

MFR: PMI

Used PMI tray shrink wrapper and heat shrink tunnel model SI-TW-30SS. Stainless steel construction. 30" wide seal bar with 9.5" clearance. Adjustable feet (conveyor currently set at 40.5") 480 vac 3 ...

Used-PMI tray shrink wrapper and heat shrink tunnel model SI-TW-30SS. Stainless steel construction. 30" wide seal bar with 9.5" clearance. Adjustable feet (conveyor currently set at 40.5") 480 vac 3 ph power required. Overall dimensions are 80" wide x 162" long x 95" tall. Serial number 02499. Last running food products.

MFR: PMI

Stainless PMR 1300 Filler Sealer for Tubs & Cups – Dual Lane, Rollstock, 30 CPM

Used- PMR Model 1300 Dual Lane Cup/Tub Filler Sealer Lidder. Stainless Steel Sanitary. Rated at approximately 30 containers per minute. Dual lane. Current container diameter is approximately 6". Has roll stock heat sealer and die cutter, and overlidder. All stainless steel sanitary system. 440 volt system. Allen Bradley Micrologic controller. Allen Bradley Powerflex speed controller. Allen Bradley Panelview 300 control pad. Unit is portable on casters. 19' overall in length, 48" wide, 65" high.

Used Pneumatic Scale TC607 Seven-Chuck Rotary Bottle Capper

Used Pneumatic Scale Barry-Wehmiller Model TC607 Seven-Chuck Rotary Capper. Stainless steel construction with seven 28 mm chucks. Can apply caps up to 89 mm with additional chucks. Includes a standalone rotary sorter for 28 mm plastic caps, matching cap elevator and control panel. Requires 460V, 3-phase power. Reported in very good condition. Possible applications include capping compatible bottles with plastic screw closures.

MFR: Pneumatic Scale

Used Park Industries Fastback Flat Edge Polisher | Single Pass Stone Edge Finisher

Used- Park Industries Flat Edge Polisher, Model Fastback. Single-pass edge finisher. Feed speed of 12" min. Works with material that is 1 - 6 cm thick. 3/60/240V. 100 Full load Amps. Serial # 206829.

Used Poly Pak model A2060 automatic shrink wrapper bundler, stainless steel construction with infeed conveyor and heat tunnel, 24" wide seal bar, up to 10" max height, adjustable temperature controls...

Used-Poly Pak model A2060 automatic shrink wrapper bundler, stainless steel construction with infeed conveyor and heat tunnel, 24" wide seal bar, up to 10" max height, adjustable temperature controls up to 400 degrees centigrade, rod type conveyor thru shrink tunnel, 440 vac 3 phase power required. Good condition.

MFR: Poly

High-Speed Shrink Wrap Bundler with Integrated Tunnel – Poly Pack CMS-24-HL

Used- Poly Pack CMS-24-HL Shrink Bundler. Continuous motion design capable of speeds up to 55 bundles/trays per minute. Has 25-1/2" wide seal jaw, jaw travel height of 13", and 75" long x 24" wide x 18" tall shrink tunnel. Allen Bradley Micro Logix 1400 PLC, A/B Kinetix 300, and Schneider Magelis HMI. Equipped with infeed belt conveyor 41" long x 19-3/4" wide, transfer infeed belt conveyor through film 26-1/2" long x 21-1/2" wide, and outfeed roller conveyor 153" long x 25" wide. All stainless steel frame with integrated shrink tunnel. Cooling fans on discharge. Last used in pharmaceutical packaging operation with 21" wide film. Right to left operation, mounted on casters. 480V/3Ph/60Hz. Footprint 22' long x 64" wide x 82" tall. Built in 2011.

MFR: PolyPack

Used Poly Pack Inline Sleeve Wrapper with Heat Tunnel | Model IL-24 Shrink Packaging System

Used Poly Pack Inline Sleeve Wrapper with Heat Tunnel | Model IL-24 Shrink Packaging System. Belt to belt transfers, infeed conveyor belt 32 in. long x 19.75 in. wide x 40 in. tall, discharge conveyor belt 17 in. long x 19.75 in. wide. Seal bar 26 in. wide, currently set for 7.5 in. tall clearance. Heat tunnel with SS rod belt 120 in. long x 26 in. wide x 40 in. tall. Tunnel 60 in. long, aperture 27 in. wide x 14 in. tall, with ambient cooling fan on discharge. Digital temp controls for tunnel and seal bar. PLC Controls with Idec programmable controller. Has stainless steel main frame. Electrical requirements 480-volt, 3 phase, 60 hz, 32 amp.

MFR: PolyPack