Used Nel Hydrogen Generator Model C30 – High-Purity 30 Nm³/h Hydrogen Production System (30 barg Output)

Used- Nel Hydrogen Generator, Model C30. Rated 30 Nm^3/hour (1140 SCFH) at 435 psig (30 barg), with 99.9998% purity. 3000 kPa (30 barg) hydrogen output pressure. 5 to 60 degrees C (41 to 140 degrees F) hydrogen temperature. 15.9 Nm^3/hour oxygen capacity. 5 to 60 degrees C (41 to 140 degrees F) oxygen temperature. 3/60/240V. Built 2019.

Used Nercon Gripper Air Rinser Lowerator for Plastic Bottles

Used Nercon Engineering Upswing Gripper Air Rinser Lowerator last running liters and 1.75 liter plastic bottles. Stainless steel construction. Cleans with deionized air. This unit infeeds through the side at 78" and discharges out one end at about 40". Adjustable gripper width. 4.5" table top conveyor. Gripper chains are driven by two 1.5 hp motors. Maximum speed is 125 fpm. Includes plc control panel. 230 vac 3 ph power required. Stands on 4 adjustable feet. Over all dimensions 55" wide x 170.5" long x 127" high. Built 2008.

MFR: Nercon

Unused Marchesini (Neri) BL-H235 Automatic Labeler – Wraparound for Mascara, Lip Gloss & Lipstick

Unused- Marchesini (Neri) Model BL-H235 Automatic Horizontal Pressure Sensitive Labeler for Mascara, Lip Gloss and Lipstick. Wraparound label applicator capable of speeds up to 200 CPM (depending on application). Container range: 80mm - 200mm (Height) x 10mm - 30mm (Diameter). Siemens Touch screen control panel, Lenze 8400 drive, Park SL VD5NE5 drive. Includes Hitachi RX2 Ink jet printer. Conveyor 1-1/2" wide x 150" long. Currently set up to run Lip Gloss and was never installed. Unit is still in original crate! 3/60/460 Volt.

MFR: Neri

Unused Marchesini BL-H235 Automatic Labeler – 200 CPM, Still in Crate

Unused- Marchesini (Neri) Automatic Horizontal Pressure Sensitive Labeler Model BL-H235 for Mascara, Lip Gloss and Lipstick. Wraparound label applicator capable of speeds up to 200 CPM (depending on application). Container range: 80mm - 200mm (Height) x 10mm - 30mm (Diameter). Touch screen control panel for machine management. Currently set up to run Lip Gloss and was never installed. Unit is still in original crate!

MFR: Neri

Uninstalled Marchesini BL-H235 Pressure-Sensitive Labeler for Cosmetics

Unused- Marchesini (Neri) Automatic Horizontal Pressure Sensitive Labeler for Mascara, Lip Gloss and Lipstick, Model BL-H235. Wraparound label applicator capable of speeds up to 200 CPM (depending on application). Container range: 80mm - 200mm (Height) x 10mm - 30mm (Diameter). Touch screen control panel for machine management. Currently set up to run Lip Gloss and was never installed. Unit is still in original crate!

MFR: Neri

Used New England NEHAE-60 High Speed Bulk Bottle Unscrambler

Used New England High Speed Bulk Bottle Unscrambler, Model NEHAE-60. Capable of speeds up to 400 containers per minute (depending on bottle size and configuration). Container size range: 5/8" to 6" (diameter) x up to 12" (height) and capable of handling a variety of sizes and shapes including round, oval, straight-wall, tapered, and non-tapered containers with proper change parts. Has an integrated bulk bottle cleated belt elevator. Allen Bradley Micrologix controls, HMI interface and lexan guarded. Machine can be retooled and set to size for your application. Ask your AEK sales representative for details. Lead time and pricing subject to receipt of samples.

MFR: New England Machinery

Used New Jersey Machine Pacestepper pressure sensitive labeler. Model 331L-SBP-109. The labeler is a right hand feed unit. Labeler has wrap around capability. The unit is currently set up for 1" h...

Used-New Jersey Machine Pacestepper pressure sensitive labeler. Model 331L-SBP-109. The labeler is a right hand feed unit. Labeler has wrap around capability. The unit is currently set up for 1" high labels but can be expandeded to 5". The top hold down conveyor can handle up to 9.5" tall bottles. The bottles are moved along through the feed wheel, timing screw, labeling station and wrap around attachment on a 4.5" wide table top conveyor. All movements are controlled by programmable stepper motors through PLCs for easy change over. The labeling head has a Eurocode 180 encoder on it. The overall length of labeling unit is 16'. Capable of speeds up to 300 cpm with encoder and 600 cpm without encoder. Requires 460 vac 3 ph electrical supply.

MFR: New Jersey Machine Co

Used Nimco CP70 Spout Applicator/Welder – 28mm for 1/2 Gallon Gable Top Cartons

Used Nimco CAP PAC Model CP70 Spout Applicator/Welder Bench Unit. Designed to weld spouts on 95mm cross section cartons and last used on 1/2 gallon gable top cartons. The spout applicator is sized for a 28 mm spout.

MFR: Nimco

Nippon Tornado 2500 Shrink Tunnel System | 39" Preheat | 380V | Hot Air Tunnel

Used- Nippon Technology Solution Ltd./Tornado Hot Air Shrink Tunnel System, type 2500. Preheat area 39" (1000 mm), Tornado 360 deg. hot air heating area 19.5" (500 mm) Blowing hot air from four directions creates a tornado effect)). 380 volt/50-60 cycle/33 KvA. Control panel. Includes belt conveyor and round table.

MFR: Nippon

Buy Used Diosna PMA 25 – cGMP High-Shear Granulator for Pilot Plant & Small-Scale Production

Used Diosna D-Niro-Fielder Model PMA 25, 25-Liter, Stainless Steel. High-shear granulator designed for efficient wet granulation and controlled particle size reduction in pharmaceutical and specialty chemical processing., this batch-style unit features a robust cylindrical bowl with integrated high-shear impeller and optional chopper assembly to ensure thorough mixing, densification, and uniform granule formation. Constructed with sanitary stainless steel contact surfaces, it supports cGMP-compliant production and easy wash-down cleaning. The PMA 25 is commonly used for scale-up, pilot-plant trials, and small-batch production, offering reliable torque transmission and fast processing cycles for powders, excipients, and active ingredients. Manufactured in 1994, Serial No. 830700.

MFR: Niro

Used 1996 Nissei DC200-25ASE 220-Ton Two-Shot Injection Molding Machine with Yushin Servo Robot

Used- 1996 Nissei DC200-25ASE 220-ton Horizontal Hydraulic Two-Shot Injection Molding Machine. Factory hydraulic rotary platen for two-color, multi-material, overmolding, and insert molding applications. It features dual 25A injection units with 45 mm screws, 6.79 oz shot capacity per barrel, 25,260 psi maximum injection pressure, an N9G / NC9000G controller, and operates on 230/460V, 3 Phase, 60 Hz power. Included are a 2008 Yushin ATB-150S servo top-entry robot with controller, teach pendant, mounted robot, and safety guarding, providing a complete automated molding cell. Suitable for producing two-color, multi-material, overmolded, and insert-molded plastic components. Last used to make Custom coasters (2 separate colors molded into the same part).

MFR: Nissei

Used Nissei NEX110III-9EG 120-Ton All-Electric Injection Molding Machine – 2 Oz Shot with Robot Interface

Used- Nissei Injection Molding Machine, Model NEX110III-9EG. This all-electric press is rated at 120 Ton clamp force with a 2 oz shot size. Tie bar spacing measures 16.5" x 16.5", platen size is 23.9" x 23.9", and maximum daylight is 29.9". The machine runs a Tact control and is equipped with air blow and a robot interface. Built 2014.

MFR: Nissei