Stainless Hammer Mill by Fitzpatrick – Screw Feeder, Mounted on Casters

Used Fitzpatrick Hammer Mill, Swinging Hammers, with Screw Feeder (no name plate). Approximate chamber 11" x 6". Swinging hammers. Motor: 575 volt, 3500 rpm. Includes feed hopper and screw feeder, stainless steel control panel. Mounted on frame with casters. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Fitzpatrick

Used Paul O. Abbe 12" Rota-Cone Vacuum Dryer – 0.5 CuFt, T316 Stainless, Skid-Mounted with Sterlco Heater

Used Paul O. Abbe 12" Rota-Cone Vacuum Dryer 0.5 CuFt, T316 Stainless, Skid-Mounted with Sterlco Heater. Vessel Volume: .5 cuft. T316 Stainless steel. Carbon steel Jacket. $4 Polish interior (180 Grit). Operating temperature: 250 deg F (121 deg C) Speed of vessel: 9 rpm. Full Vacuum to 14.7 psi. Jacket is 14.7 psi Max. With Sterlco Sterl-Tronic Heater. Model M6016-MX, Serial# 73558, 6000 Watts. 150 psig. Serial# of POA dryer is A45546. built 1992. (Vacuum pump not included, but can be provided at extra cost).

MFR: Paul O Abbe

Used Lancaster Products model K high shear, counter current mixer for labs or small batches. Stainless Steel 0.7 cu.ft. total capacity, 0.3 cu.ft. working capacity removable drum. This unit is equipp...

Used-Lancaster Products model K high shear, counter current mixer for labs or small batches. Stainless Steel 0.7 cu.ft. total capacity, 0.3 cu.ft. working capacity removable drum. This unit is equipped with a side scrapper and comes with two different types of blades (one is stainless steel the other is carbon steel) The control panel has adjustable speed control and a digital timer. 208 vac 3 ph power required.

MFR: Lancaster

Used Friulair Chiller | Model CWM003-UE | 0.71 Ton | R407C Refrigerant | Compact Cooling System

Used- Friulair Chiller, Model CWM003-UE. 0.71 Ton nominal capacity. V0.013 gallon Refrigerant Circuit, R407C with 33.51 oz charge. Serial# 130021582. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Used Leistritz ZSE18HPe-PH-40D Twin Screw Extrusion and Pelletizing Line

Used Leistritz Model ZSE18HPe-PH-40D Co-Rotating Twin Screw Extrusion And Strand Pelletizing Line With K-Tron Feeders And Thermo Scientific Pelletizer. Laboratory and pilot-scale extrusion system designed for continuous polymer compounding, melt processing, material blending and pellet production. Line includes (1) Leistritz Model ZSE18HPe-PH-40D co-rotating twin screw extruder equipped with (2) 18 mm diameter screws, approximately 40:1 length-to-diameter (L/D) ratio and a maximum screw rotation speed of 1,200 RPM. Features (8) electrically heated, water-cooled processing zones for temperature control throughout the extrusion barrel and a 9.4 kW (approximately 12.6 HP) drive. Extruder Machine #3878, manufactured in 2009. Includes (2) K-Tron Model K-SFS-24 material feeders for controlled ingredient introduction, (2) stainless steel water bath sections each measuring approximately 9" wide x 115" long for cooling extruded strands, and (1) Thermo Scientific Model Pharma 16 Varicut pelletizer for cutting processed material into pellets. Pelletizer Serial #7.11/000094, manufactured in 2011. Possible applications include twin screw extrusion, polymer compounding, melt blending, strand pelletizing, masterbatch production, color concentrate development, additive incorporation, formulation testing and processing of compatible thermoplastic resins, polymer blends, specialty plastic compounds and other suitable extrudable materials.

MFR: Leistritz Corporation

Pre-Owned Killion KL-075 Single Screw Extruder – Electrically Heated, Air-Cooled

Used Killion KL-075 Single Screw Extruder. 19.1 mm Diameter screws. 25:1 L/D. Screw speed 12-120 RPM via a gearbox by a 1.1 kW-380 volt/50cycle/3Ph DC motor. 3 housing sections. Electrically heated, air cooled. Feed hoppers, control/operating panel and additional infrastructure. On wheels. Serial # 19707. In an R&D application. Over all dimensions: 42.9" (1100 mm) long x 35.1" (900 mm) width x 58.5" (1500 mm) high. Weight 660 lbs (300 kgs). Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Killion

Prism VARICUT 24 Pelletizing Line with TSE 24TC Extruder

Used Prism Pelletizing Line. Consists of: Prism parallel twin screw extruder, model TSE 24TC, 24 mm co rotating screws, 25:1 l/d, electrically heated, water cooled barrel, (3) top vents with (2) plugged, 6 barrel zones with on board control panel, 3.7 kw, 230 volt ac motor drive with VFD controller, two hold stand die, serial# 2078. (1) screw feeder with .26 kw motor drive with agitated hopper. (1) Material hopper. (1) Prism water bath pelletizer unit, model VARICUT 24, with approximately 8" x 8" x 59" long stainless steel water bath, 2.5" wide air wipe with blower, 2 5/8" wide stand pelletizer with pull rolls, helical rotor, 1.1 kw motor drive. Serial# 2077, built 1996.

MFR: Prism

Used Munson Industrial Rotary Blender – Model MX-1-SS

Used- Munson Industrial Rotary Blender, Model MX-1-SS. 1 cubic foot capacity; Stainless steel mixing chamber; Equipped with liquid spray nozzle. Mounted on portable stand with tilt discharge capabilities. Serial# 12190.

MFR: Munson Machinery

Used AMK VIU4 4-Liter Extrusion Kneader Mixtruder – Stainless Steel Sigma Blade Mixer Extruder with Vacuum Cover

Used- 4 Liter AMK Extrusion Kneader Mixtruder, Model VIU4. Stainless steel construction, vacuum cover, approximately 8" x 8" x 7.5" deep mixing changer, tangential sigma blades driven by 2.2 kw motor drive, discharge extruder driven by 1.5 kw motor drive, jacketed bowl and extruder barrel, on base, serial# 12202. Built 1985.

MFR: AMK

Vestil Hydraulic Drum Dumper for 30 & 55 Gallon Drums – Portable Unit

Used Vestil Model HDD-26-7-P Hydraulic Drum Dumper. Maximum Capacity up to 750 Lbs. Works with 55 and 30-gallon plastic, steel and fiber drums. The unit has a solid steel chute. Portable unit with two rigid and two swivel casters with floor lock screws. All steel construction. Upper travel limit switch, emergency brass safety velocity fuse in cylinder and vertical adjustment drum restraints are standard. Chute is rotated with a hand held control on an 8 ft. long coil cord standard.

MFR: Vestil

Used Yale 2,000 lb. Capacity 24V Electric Sit-Down Forklift – Model MSW020LAN24CS083

Used- Yale Aprox. 2,000 lb. Capacity 24 V Electric Sit-Down Forklift, Model MSW020LAN24CS083, S/N N576930 with 2-Stage 126" Lift Height

MFR: Yale

Used Paul O. Abbe Lab Double Arm Mixer – Model 1BSB, 1 Gal, 316 SS, Hydraulic Tilt

Used- Paul O. Abbe Lab Double Arm Mixer, Model 1BSB, 316 Stainless Steel. 1 Gallon operating capacity (2 total). Carbon steel jacket rated 14 psi. Bowl approximate 7" left to right x 9-1/2" front to back x 6-3/4" deep, tangential sigma blades, front blade 70 to 17 rpm, rear blade 41 to 10 rpm, flat top cover, geared one end. Single ram hydraulic tilt with power pack. Mixer driven by a 2 hp, 3/60/230/460 volt, 814 rpm variable speed motor with reducer. Mounted on legs with base. Serial # A41282.

MFR: Paul O Abbe