Used IMA Swiftpack Bottle Line - Complete Tablet & Capsule Packaging System

Used- IMA Swiftpack Complete Solid Dose Bottle Line. Line consists of a Kaps-All Model AU-6C automatic bottle unscrambler with ionized air cleaner, Thermo Ramsey Model Versa RX checkweigher for empty bottles, IMA Model B12 electronic track counter, Themo Ramsey model Versa RX checkweigher with reject, Pharmafill Model CS-2 twin head cottoner with pin indexing, Bellatrx Model SCC chuck capper with cap elevator and sorter (changeparts for 33mm and 38mm caps), Enercon Compak 3200 water cooled induction sealer, Filamatic Model CAL-2-CT Cap retorquer into an Arrowhead 36" accumulation table. All interconnecting conveyor is included.

MFR: IMA

Used IMA (BFB) CP18BA Automatic Case Erector, Packer, & Sealer – 8 CPM

Used- IMA (BFB) Model CP18BA Automatic Case Erector Packer and Sealer. Capable of speeds up to 8 cases per minute (depending on application and collation). Has a case size range: 220mm - 600mm (8.66 - 23.62") length x 120mm - 400mm (4.72 - 15.75") width x 120mm - 350mm (4.72" - 13.78") depth. Seal bar 22" long. Has pre-folded leaflet inserter, tape sealing head, Optel OP300 vision system. Allen Bradley Compactlogix L35E PLC, A/B panelview plus 1000 HMI, A/B powerflex 40. 3/60480 Volt. Last used in pharmaceutical packaging operation.

MFR: IMA

Imanpack Minimicropac Flow Wrapper – Compact Packaging Machine for Small Products

Used- Imanpack Horizontal Flow Wrapper, Model Minimicropac. 40 bags/minute maximum output; 400mm (approx. 16") reel holder; 125-250mm (approx. 5-10") bag length range; 10-150mm (approx .4-6") bag width range; 5-80mm (approx. .2- 3") bag height range; 1000mm L x 200mm W x 960mm H (approx 40" x 8" x 38") infeed conveyor dimensions. 3/50/400V. Built 2005.

MFR: Imanpack

Used HydroFloTech ClariMax 500 GPM Inclined Plate Clarifier – 2500 sq. ft. PSA, Skid-Mounted with Pumps & Tank

Used HydroFloTech ClariMax 500 GPM Inclined Plate Clarifier 2500 sq. ft. PSA, Model CMCIPC-2500-2.0-HP. Specially fabricated multiple chamber plate pack system; 55 degree sloping walls; Serviceable and removable plate packs; 2500 sq. ft. Projected Surface Area (PSA) inclined plate clarifier chamber; Hydraulic Loading Rate (HLR) = 0.2 gpm / sq. ft. of PSA at 500 gpm design flow rate; 12" - 150# ANSI flange inlet/outlet fittings; Flash/Floc chambers of 3000 total capacity divided 600/2400; Bottom sludge collection chamber (no auger).

MFR: Hydroflow

Used 500 GPM Inclined Plate Clarifier – HydroFloTech ClariMax with Polymer & Sludge Pumps

Used 500 GPM Inclined Plate Clarifier HydroFloTech ClariMax with Polymer & Sludge Pumps, Model CMCIPC-2500-2.0-HP. Specially fabricated multiple chamber plate pack system; 55 degree sloping walls; Serviceable and removable plate packs; 2500 sq. ft. Projected Surface Area (PSA) inclined plate clarifier chamber; Hydraulic Loading Rate (HLR) = 0.2 gpm / sq. ft. of PSA at 500 gpm design flow rate; 12" - 150# ANSI flange inlet/outlet fittings; Flash/Floc chambers of 3000 total capacity divided 600/2400; Bottom sludge collection chamber (no auger).

MFR: Hydroflow

HydroFloTech ClariMax Inclined Plate Clarifier – 500 GPM, PSA 2500 ft², Skid-Mounted

HydroFloTech ClariMax Inclined Plate Clarifier 500 GPM, PSA 2500 ft, Skid-Mounted, Model CMCIPC-2500-2.0-HP. Specially fabricated multiple chamber plate pack system; 55 degree sloping walls; Serviceable and removable plate packs; 2500 sq. ft. Projected Surface Area (PSA) inclined plate clarifier chamber; Hydraulic Loading Rate (HLR) = 0.2 gpm / sq. ft. of PSA at 500 gpm design flow rate; 12" - 150# ANSI flange inlet/outlet fittings; Flash/Floc chambers of 3000 total capacity divided 600/2400; Bottom sludge collection chamber (no auger).

MFR: Hydroflow

Used Industrial Filter Manufacturers Vacuum Pump System – Model VAGU10TVO15316L – 50 PSI Internal – Built 2006

Used- Industrial Filter Manufacturers Vacuum Pump System, Model VAGU10TVO15316L. Internal rated 50psi at -20 to 250 degrees F, External rated 15psi at -20 to 250 degrees F. Serial# 1038700101, National Board# 360, Built 2006.

MFR: Tuthill

Unused Krack Industrial Freezer – Model CSD0300-LRK 123CST-30 (7,200 Sq Ft, Built 2022)

Unused Krack Industrial Freezer Model CSD0300-LRK 123CST-30 (7,200 Sq Ft, Built 2022). 7200 square foot area. 80' x 90' x 20'4" H OAD. Included components: Insulated wall and ceiling panels, Compressors, Evaporators, Freezer-rated doors, Floor insulation system, All electrical components, controls, and hardware. 3/60/208-230V. Built 2022.

MFR: Krack Corp

Industrial Dry Ingredient Spreader - Martin E-Z Spreader, Spray Nozzles, Wire Belt

Used- Custom Dry Ingredient Spreader with Spray Nozzles. Consists of: (1) Martin E-Z dry ingredients spreader, approximately 35-1/2" wide. (2) Spraying Systems Co spray nozzles. Approximate 36" wide x 84" long wire mesh belt. (1) Allen Bradley Powerflex 40 drive. Mounted on stainless steel frame with casters. No manufacturers tag. 3/60/230 Volt.

Videojet 1610 InkJet Printer for Food, Pharma, and Industrial Packaging

Used- Videojet Model 1610 InkJet Printer. Capable of up to 5 lines of high resolution print at speeds up to 960 fpm.

MFR: Video Jet

Used Inline Filling Systems NT Capper Fully Automatic Inline Capper

Used Inline Filling Systems Fully Automatic Inline Capper, Model NT Capper. Up to 200 CPM, depending on cap size and container configuration. Up to 120mm diameter and container size range of (height) 1-1/2" to 15" and (width) 1/2" to 7" in plastic, metal, or glass. Cap tightening system of rotating belts permits single point tool-less cap width adjustment, corrosion resistant. Control panel with Koyo Direct Logic 05 PLC. Includes elevated conveyor with hopper, serial# 43110. Serial # 43104. 1/60/120 Volt. 38mm & 28mm change part available.

MFR: Inline Filling Systems

Complete Inline Bottle Filling and Packaging Line – Overflow Filler, Capper & La

Used- Inline Filling Systems Liquid Bottle Filling Line. Line was set up to run 64oz rectangular bottles and 32 oz square containers with 53mm caps. Containers were either front and back or 3 sided wrap on the square bottle. Line consists of 45" diameter stainless steel unscrambling table with variable speed drive and square bottle orientor. Inline Filling Model FOFNT48 4 head overflow filler with drip tray, 1" diameter nozzles, indexing gating system, washdown capable, AB Micro 850 PLC, (2) A/B powerflex 523 and A/B Panelview 800 HMI, overflow tank with pump. Stainless steel 4-1/2" wide conveyor chain, Computorue NT automatic capper (currently set on 53mm caps) with cap size range up to 120mm. Container range: 1-1/2" - 15" (height) x 1/2" - 7" (width). Has 5.0LH bulk cap elevator/sorter. Enercon model Super Seal 75 induction cap sealer, with air cooling. Universal CP-1000 front and back labeler with wrap station. Video Jet 1580. 48" Accumulation table. Last ran a tea beverage product.

MFR: Inline Filling Systems