Stock No.:
54196001Used Alfa Laval Vertical Disc Stack Centrifuge – Model USPX 204SGT-11CN-60, 8500 RPM, 3 HP, Refurbished
Fully refurbished. Used- Alfa Laval Vertical Disc Stack Centrifuge, Model USPX 204SGT-11CN-60. Solids ejecting. 8500 RPM max. bowl speed. Stainless steel contact parts. Driven by a 3hp 3/60/440v 3525rpm motor. Serial# 3535293, built 1999. Still in wrapping from refurbish and ready to go.
MFR: Alfa Laval
Stock No.:
54286001Used Alfa Laval AFPX / BRPX 617SFV-31CGL Solids-Ejecting Disc Centrifuge | High-Capacity Separator
Used Alfa Laval AFPX / BRPX 617SFV-31CGL Solids-Ejecting Disc Centrifuge | High-Capacity Separator-31CGL. Stainless steel construction. 65 cubic meters/hour max. throughput capacity. 4,480 max. bowl speed. 45 kW (approx. 60 HP), 3/60/480V motor. Skid mounted. With control panel and VFD motor starter. Unused since being fully refurbished.
MFR: Alfa Laval
Stock No.:
54687035Used Alfa Laval Model MAPX 207 24 S Automatic Desludging Disc Centrifuge With Heat Exchangers And Biodiesel Process Skid
Used Alfa Laval Model MAPX 207 24 S automatic desludging disc centrifuge with three-phase separation design for liquid/liquid/solid separation. Unit is driven by a 7-1/2 hp, 230/460 VAC, 3-phase, 60 Hz, 1,764 rpm motor. Centrifuge is mounted in a carbon steel spill-containment skid with fork slots measuring approximately 90" long x 48" wide x 12" high with approximately 7" inside depth. System also includes (2) basket strainers and (6) stainless steel shell-and-tube heat exchangers, each equipped with (54) tubes measuring approximately 1/2" ID x 47-1/2" long. Serial #2919 100. Last used in biodiesel production. Possible applications include three-phase separation, clarification, purification and solids removal of compatible biodiesel, oils, fuels, process liquids and other suitable liquid/liquid/solid process streams.
MFR: Alfa Laval
Stock No.:
70474011Used All-Fill 350E Powder Auger Filler – Stainless Contact Parts with Dual Auger Tooling
Used- All-Fill Powder Auger Filler, Model 350E. Has stainless steel contact parts and is mounted on painted carbon stand. Includes (2) sets of auger tooling. Built 2023. Has top-mounted drive. 3/60/220V. 7 amp.
MFR: All Fill
Stock No.:
72452001Used All-Fill B-300 Semi-Automatic Auger Filler – 120 CPM
Used- All Fill Semi-Automatic Auger Filler, Model B-300. Cycling speeds up to 120 per minute. Fill range from milligrams to 50 lbs. 15 Gallon 304 stainless steel agitated hopper, approximate 22" diameter x 21-1/2" deep. Tooling driven by a 1-1/2hp, 3/60/230/460 volt, 1140 rpm motor. Cerebus II computer controller. Has level detector. Serial # 22472.
MFR: All Fill
Stock No.:
73076001Inline Auger Filler with Pin Indexing – All-Fill SHA-400 + Quincy Air System
Used- All Fill Model SHA-400 Automatic Inline Auger Filler. Has a Cerebus III Auger Filler with pin indexing system. Includes a Quincy 25HP screw driven air compressor (Model No. QMB25ACA21C) With dryer. Last used for Seasonings.
MFR: All Fill
Stock No.:
73132001Used All-Fill VF-120-HD Vibratory Net Weigh Scale – 1 oz to 10 lbs Capacity
Used- All Fill Model VF-120-HD vibratory net weigh scale. Capable of speeds up to 15CPM. Weigh range: 1 oz - 10 lbs. Stainless steel contact. Mounted on casters. 1/60/110V. Serial# 65-147. Built 2013.
MFR: All Fill
Stock No.:
73303002Used All-Fill Model V3200 Vertical Form Fill Seal Machine with Auger Filler | VFFS Packaging System
Used- All Fill Mode V3200 Vertical Form-Fill-Seal Machine with All Fill Auger Filler. Capable of speeds up to 80 bags/min (depending on application). Has a bag size range: 3" -12" (width) x 3" - 20" (length). Approx. 15" seal jaws. Has agitated hopper with level sensor and inclined discharge conveyor. Last used with 1 kg bags. 3/240V. Previously used for coffee powder. Small workbench included.
MFR: All Fill
Stock No.:
54210001Used Allied Engineering Super Hot Fire Tube Boiler, Model AAE-3000-N-M | 3M BTU/hr | Natural Gas | 160 PSI | BC-1 Controller | Skid Mounted
Used- Allied Engineering Super Hot AAE Series Fire Tube Boiler, Model AAE-3000-N-M. Natural gas, High/Low fire. 3M BTU/hr input, 1.2M BTU/hr output. Minimal relief valve pressure 2400 MBH. 160 psi maximum water pressure, 250 degrees F maximum temperature, 227 square feet heating surface. Skid mounted. Includes: Electronic Ignition, Stainless steel Burners, Gas Valve, Redundant Gas Valve, BC-1 Microcontroller, Operating Aquastat, Safety High Limit Aquastat, Temperature / Pressure Gauge, A.S.M.E. Pressure Relief Valve 30 p.s.i., Drain Valve, Draft Hood, Transformer, Control Panel Enclosure, Main On/Off Switch with Indicator Light. 60hz, 120 volt. Shack available. Serial # 7161. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Allied Engineering
Stock No.:
72641002Used Alloyd 20S 6x9 Carousel Blister Sealer – 20 Stations, 20 CPM
Used Alloyd Model 20S 6X9 Carousel Blister Sealer. Machine is a 20-station unit capable of speeds up to 20 cycles per minute. Has a seal range of up to 6" x 9". Has 117" manual load station. Has automatic stations for blister load, card load and finished package pick-off.
MFR: Alloyd
Stock No.:
72774002Industrial Blister Sealing Machine - Alloyd Aergo 2 Plus, 14” x 28” Capacity
Used- Alloyd Aergo 2 Plus Semi Automatic Shuttle Style Blister Sealer. Capable of speeds up to 8 cycles per minute. Sealing capacity: 14" x 28". Temperature range: Ambient - 550 degrees F. Two station front to rear shuttle machine. Mounted on a painted carbon steel frame. 3/50/60/208/240 volt.
MFR: Alloyd
Stock No.:
73139002Used Alloyd 18S-1216 Automatic Blister Sealer – 14x18 Cards, 20 CPM Max
Used- Alloyd Model 18S-1216 Automatic Carousel Style Blister Sealer. Capable of speedsfrom 10 - 20 cycles per minute (depending on application. Max card size 14" x 18" Max blister flange 12' x 16" blister depth 3" max.. Automatically feeds die cut, adhesive coated cards on top of the product and blisters. Automatically applies heat 7 pressure to seal the blister to carding and ejects finished packages to a conveyor, packing table or similar. 230 vt, 25 amp 3 phase, 60Hz. 55 cfm @100psi.
MFR: Alloyd