Used Cousins Titan 4100-35-FA High-Speed Stretch Wrapper – 1-12 RPM Rotation

Used- Cousins Packaging Inc. Industrial / Warehouse Automatic Stretch Wrapper, Model Titan 4100-35-FA. Rated up to 35 loads/hour; 50" L x 50" W x 86" H max. load size; 24" W x 24" L x 24" H min. load size; Double flange bearing support system; Twin V-belt drive pulleys with belt tensioner; Super Rapid Thread 20" capacity pre-stretch film carriage; Special film threading device; 33-313% fixed stretch capability; 1-12 RPM rotational speed c/w soft start acceleration; 1/2 HP DC variable speed motor; Panasonic PLC. 1/60/115V.

MFR: Cousins

Used - Cozzoli GW24 Batch Ampule & Vial Washer, 10,000 CPH

Used- Cozzoli Model GW24 Batch Style Ampule and Vial Washer. Machine is rated for speeds up to 10,000 containers per hour. Can handle containers ranging from 1ml to 500ml. Includes 316l needle plate 18 across x 10 deep, 24mm centers, pn# 032324. 1/60/110 Volt. Serial# GW24-172.

MFR: Cozzoli

Used Vincent CP-6 Horizontal Screw Press – 6" Diameter Dewatering Press with 5 HP Drive, Refurbished Available

Used Vincent CP-6 Horizontal Screw Press 6" Diameter Dewatering Press with 5 HP Drive, Refurbished Available. Approximately 6'' diameter x 32'' long screw. Approximate capacity 300-1000 pounds per hour, 20 rpm screw. Driven by a 5 HP, 3/60/230/460V Nord motor. Fed through reducer, ratio 68.63:1. With 320 micron perforated screen. Serial #11384-C.

MFR: Vincent

Used Complete 153,000bpd Crude Oil Terminal Stabilization Plant

Used- Complete 153,000bpd Crude Oil Terminal Stabilization Plant consisting of: (1) Degasser Unit (Unit ID 9600) with Heat Transfer Unit, (1) Gas Plant (Unit ID 9400), (1) Liquified Gas Treating Unit (Unit ID 9330). Including piping, valves, safety equipment and additional infrastructure. Further details and technical documentation are available upon request. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Unused DSI Dantech Ultraflow Max Industrial Crust Freezer – 1350 lbs/hr, Built 2022

Unused- DSI Dantech Industrial Crust Freezer Machine, Model Ultraflow Max. 41" W x 13' freeze chamber; Stainless steel construction; (3) 10 HP fans; Dimple-jacket cold plate (rated 1350 lbs/hour); ID# 21-1290-102. Freezer OAD: 16' L x 6'7" W x 8'4" H; Control panel OAD: 6' L x 7' H x 1'6" D. 3/60/480V. Serial# 21-1290-102. Built 2022.

Buy Used Cryovac Model 2002A Liquid Pouch Machine – Sauces, Soups, Ready Meals

Used Cryovac/Sealed Air Model 2002A Onpac Vertical Form Fill Seal. Speeds up to 36 ppm. Max pouch size up to 2 gallons. Sanitary stainless steel construction. Capable of packaging cold liquids as well as hot products up to 210F. Uses co-extrusion and laminated films available from Cryovac in 6", 7.5", 9.25" and 11.5" widths. 230 vac 3 ph electric power and air required. Designed for packaging pumpable foods / liquids such as sauces, soups, ready-meals, processed fruits and vegetables, oils, condiments, liquid eggs, dairy products, etc.

MFR: Cryovac

Unused Cryovac 8600-14E Rotary Vacuum Packaging Machine – 8-Chamber High-Speed Food Packaging System

Unused- Cryovac (Sealed-Air) High-Performance Rotary Vacuum Packaging System, Model 8600-14 E. Rated for speeds up to 60 packages per minute (depending on package orientation and change-parts). Has a package size range of 15 to 39" (length) x 10-12" (wide) x 6 to 10.5" (tall). Has a maximum seal length of 14". Has 8-extended vacuum chambers. Is of stainless steel construction. Has integrated waste collection system, and new Busch vacuum pumps. Ideal use: meats, cheeses, poultry, etc. On-board PLC controls and operator HMI. 3/60/415V. Our freight specialists can assist with door to door trucking, and any customs documentation to ensure a smooth transition.

MFR: Cryovac

CTM Model 3600-PA Label Printer Applicator – Pressure-Sensitive Labeler, Tamp-Blow

Used CTM Model 3600-PA Printer Applicator with Portable Stand and Parts Unit; high-speed labeler used to thermally print and apply pressure sensitive labels to moving products; Short height actuator assembly; 4" tall labels can be located 1/4" from the bottom of products; Right hand or left hand version for either side of conveyor; Up to 7.1" wide labels, up to 6.6" print width; Built-in bar codes and alpha-numeric fonts; Proven tamp-blow application; PLC control; 108-132 Volts AC, 5 Amps,54/60 Hertz, Single Phase; Pneumatic 90 PSI., 3-5 CFM; Approximately 150 lbs. Last used in a cheese manufacturing application.

Used CVC Technologies CVC1101 Cleated Belt Conveyor – 85” Discharge Height

Used- CVC Technologies Cleated Belt Conveyor, Model CVC1101. Approximate 4-1/2" wide cleated plastic belt. Belt is set on 2-3/4" center line, cleat 4-1/2" wide x 1-1/8" tall. Hopper with cover. Approximate 85-1/4" discharge height. Mounted on stainless frame with casters. 1/50/60/220 volt, 200W. Serial# 098Z1422.

MFR: CVC

Used CVC SC202 Countertop Bottle Filling Capsule Counter 2006

Used CVC Countertop Capsule/Tablet Counter, Model SC202. Capable of 600 to 1,000 capsule pieces per minute/ 1,000 to 2,000 round tablet pieces per minute. Designed for applicable bottle sizes with a diameter ranging from 30 to 100 millimeters, an inner mouth diameter of 25 to 100 millimeters, and a height between 50 and 200 millimeters. It accommodates product sizes with a diameter of 5 to 20 millimeters, a length of 5 to 30 millimeters, and a width of 5 to 20 millimeters. 220V 60 Hz single-phase. Serial # 0622102, Built 2006. Approximate OAD's 26"x 32"x 30", 165#.

MFR: CVC

Used CVC SC202 Countertop Capsule & Tablet Counter 1000+ CPM

Used CVC Model SC202 Countertop Capsule/Tablet Counter. Capable of 600 to 1,000 capsule pieces per minute/ 1,000 to 2,000 round tablet pieces per minute. Designed for applicable bottle sizes with a diameter ranging from 30 to 100 millimeters, an inner mouth diameter of 25 to 100 millimeters, and a height between 50 and 200 millimeters. It accommodates product sizes with a diameter of 5 to 20 millimeters, a length of 5 to 30 millimeters, and a width of 5 to 20 millimeters. 220V 60 Hz single-phase. Built 2006. Approximate OAD 26"x 32"x 30", 165#.

MFR: CVC

Used CVC1000 Tablet Capsule Counter Inline Stainless Steel Counting System

Used CVC Inline Centrifugal Tablet/Capsule Counter, Model CVC1000. Capable up to 1,800 tablets per minute and up to 1,300 capsules per minute, product dimensions ranging from a minimum length and width of 0.08 inches to a maximum length of 1.0 inch and maximum width of 0.75 inches. Compatible product container dimensions include heights from 1.5 to 6.0 inches, diameters from 1.5 to 3.25 inches, and container openings ranging from 1.0 to 3.0 inches. The unit is constructed of stainless steel and has overall system dimensions of 135.0 inches in length, 21.0 inches in width, and 65.0 inches in height, with an approximate weight of 794 pounds. It features a conveyor length of 118.0 inches with a conveyor bed height of 36.0 inches from the floor. Additional features include dust accumulation ports and a Translucent Product" operating mode. The system utilizes a pneumatic drive type with air requirements of 4.0 cubic feet per minute at 87 PSI and requires an electrical supply of 220 volts, 50/60 Hertz, single-phase power.

MFR: CVC