Used Glatt WSG 500 TC Fluid Bed Dryer – Stainless Steel Construction

Used- Glatt Fluid Bed Dryer, Type WSG 500 TC, Serial# 6999, Stainless Steel Construction. Includes bowl cart, Glatt LD500 lift, panels & valves.

MFR: Glatt

Used Glatt Industrial Stainless Steel Fluid Bed Dryer, Type GPCG 300.

Used- Glatt Industrial Stainless Steel Fluid Bed Dryer, Type GPCG 300. Includes bowl cart and has Glatt-made lift, model LD500. Built 2000.

MFR: Glatt

Used Glatt CPCG 5 Fluid Bed Dryer – Stainless Steel – Spray Granulation – Steam Heated – 5.5 kW Blower – 1996

Used- Glatt Fluid Bed Dryer Model CPCG 5. Stainless steel construction with spray granulation and drying inserts, 2 bar shock rating, 5.5 kw blower, 460 volt, steam heated with control panel, serial 6345. Built 1996.

MFR: Glatt

Industrial Water Temperature Controller – Delta T ESW-09C 9KW

Used Delta T Systems Model ESW-09C Water Temperature Control Unit. 9 KW Heating capacity. 3/4 HP Pump. Approximate temperature range 32F to 230F (0C to 110C). Mounted on casters for mobility. Serial# 202167-1-1-1. 3/60/208 Volt, 35.5 Amp.

AGI 18.5" Wide Mobile Inclined Conveyor – Stainless Steel Frame

Used- AGI Industrial Mobile Inclined Cleated Conveyor System. Approximate 18-1/2" wide x 6 ft long, cleated belt. Cleat 8" x 2" tall. Driven by .5hp, 3/60/460 volt, 1730/58 rpm gear motor. Control panel with Allen Bradley powerflex 525 drive. Adjustable height. Mounted on stainless steel frame with casters. Serial# 2395-01. 3/60/460 Volt. Built 2022.

Used Extru-Tech E-325 Single Screw Extruder – 150-800 Lbs/Hr

Used- Extru-Tech Model E-325, Single Screw Extruder. Unit designed primarily for research and development purposes. 3.25", Approximately 40 HP motor, Can process between 150 to 800 pounds per hour (68 to 363 kilograms per hour). The E-325 is equipped with a 6x30 single-shaft conditioner, an accurate feed system, a knife drive, and a control panel with a variable frequency drive (VFD) panel operating at 230 volts.

MFR: Extrutech

Laboratory Blown Film Line by Dr. Collin – 20 mm E20T Extruder with Winder

Used Dr. Collin Laboratory Blown Film Line Consisting Of: (1) Dr. Collin 20 mm single screw extruder, type E20T. Approximate 25 to 1 L/D ratio. (2) Zone non-vented barrel electrically heated, air cooled. Feed throat with hopper. Driven by a 1.1Kw, 3/50/400-volt motor. Approximate 2-1/2" diameter blown film die, (1) air ring with blower, (1) approximate 7.8" (200 mm) wide take off winder. Includes control panels. Serial# 9120-3914, New year 2014. Previously used in an R&D lab. Weight 440 lbs (200 kgs). Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Dr. Collin

Pre-Owned Dispermat CA40-C1 Lab Dissolver – 50?mm Saw Disc with Control Panel

Used VMA-Getzmann Lab Dissolver, Type Dispermat CA40-C1. Stainless steel in product contact parts. 11.7" (300 mm) shaft. 1.95" (50 mm) dia. saw disc. Complete with control panel. Serial # A1000637. New year 2011. Previously use in an R&D application. Over all dimensions: 31.2" (800 mm) long x 23.4" (600 mm) width x 23.4" (850 mm) high. Weight 220 lbs (100 kgs). Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Used GEA Westfalia UCD 205-00-02/32c Decanter Centrifuge – 5500 RPM, 2-Phase, Stainless Contact, WWT Application – 2011

Used- GEA Westfalia UCD 205-00-02/32c Decanter Centrifuge. Stainless steel construction (product contact areas), max bowl speed 5500 rpm, 2 phase separation (liquid/solids) design, single row of lined cake solids discharge ports, base, casing, gearbox. On 4 legs. Previously used in an WWT application. Serial# 8860-355, built 2011. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Westfalia

Used SPX-APV Homogenizer | Model R185Q-54.140 | 6000 PSI | Stainless Steel | Available 2026

Used SPX-APV Homogenizer | Model R185Q-54.140 | 6000 PSI | Stainless Steel | Available 2026. Max pressure 400 BAR (6000 PSI). Incl. control panels, pump and additional infrastructure. Last used in fruit juice concentrate operation. Serial # J5-18.205. New year 2018. Most equipment is in production operation during 2025 and will become available for collection in 2026 Definitive date to be arranged. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: SPX

Used APV Homogenizer, Model BT.30.81 | 600 BAR / 9000 PSI | Stainless Steel | High-Pressure Juice Processing

Used APV Homogenizer, Model BT.30.81 | 600 BAR / 9000 PSI | Stainless Steel | High-Pressure Juice Processing. Max pressure 600 BAR (9000 PSI). Incl. pump and additional infrastructure. Last used in fruit juice concentrate operation. Serial # 1-01.164. New year 2001. The unit is in production operation during 2025 and will become available for collection in 2026 definitive date to be arranged. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: APV

Used Aeromatic Aeroglide C1 120-65 RGC Fluid Bed Dryer – 5,000 lbs/hr, Stainless Steel, Natural Gas, Built 2005

Used- Aeromatic Aeroglide Dryer, Model C1 120-65 RGC. Up to 5000 lbs/hr (dependent on product); Drying Bed Area 350 sq. ft. drying area; 140 sq. ft. cooling bed area; 9'9" bed width; 152.4mm (6") max. first stage bed depth; 152.4mm (6") max. second stage (cooling) bed depth; Food grade 304 stainless steel construction; Natural gas fueled. 3/60/460V. SN 05153-02. Built 2005.

MFR: Aeromatic