Used Quincy Compressor System with QHD635 Refrigerated Air Dryer

Used Quincy 3 compressed-air module consists of a dual-receiver tank assembly integrated with a factory-built Quincy control cubicle (Type 1900 5003 32 ED05, S/N 3002383-26), designed for 24V control voltage and dual-frequency operation at 50/60 Hz. The electrical system operates on a 2-phase 115230V supply with a 2-amp rated load, and incorporates protection and monitoring circuitry in a sealed control enclosure. The unit is paired with a Quincy refrigerated air dryer, Model QHD635 (S/N APF267527, 2022), rated for 411 bar inlet pressure, 150C allowable inlet temperature, and a maximum 55C outlet temperature.

Buy Used Intuitech Ozonation System – IoT-Enabled, Turnkey Water Treatment Skid

Used- Intuitech Ozonation Pilot Plant. Automatic pressure and temperature compensation allows direct entry of ozone dosage in mg/L in manual mode, while dissolved ozone concentration is maintained at a setpoint in auto mode. The system automatically calculates ozone transfer efficiency and applied dosage and includes an integrated oxygen generation system. An ambient ozone concentration transmitter provides ozone leak detection and automatic shutdown. A feed pump with automatic flow control is included, and the chemical feed systems can be configured for flow-pacing, closed-loop PID, or trim control. The chemical feed pump can also be configured as a composite sampler. The contactor includes twenty-five equally spaced sampling ports for decay analysis, and the influent piping weir eliminates the need for a feed tank. All equipment is integrated onto one skid for plug-and-play operation and is designed for automatic unmanned operation. The system can be monitored and controlled remotely via wireless cellular connection. Data logging outputs a formatted text file suitable for spreadsheets and charting applications. A historical and real-time trending visualization tool is included, along with alarm notifications via email or text messaging. An IoT network of sensors provides exceptional diagnostic information. The pilot module is designed for fully automatic unmanned operation and can be monitored and controlled remotely. A wireless cellular router is installed in the control panel, allowing remote access to the pilot module in locations where adequate cellular data service is available. The router can be configured for the Verizon or AT&T networks, depending on which provides the best service at the installation site. Data service is included during the warranty period, and additional service beyond that can be purchased from Intuitech in one-year blocks. Any task normally performed using the operator interface can also be done remotely using a laptop, tablet, or smartphone. The operator interface can also be configured to send alarm notifications via email or text messaging.

Used Semi-Automated Mushroom Substrate Processing System for Sale

Used Semi-automated Mushroom Substrate Processing System. Integrates high-performance components to efficiently manage pasteurization, cooling, inoculation, and packaging all within a single vessel. Two jacketed Patterson All-Weld Paddle Mixers (37 cubic feet each) operate simultaneously to blend substrate ingredients uniformly while maintaining controlled processing conditions. Substrate moisture content is controlled using a Water Metering Sensor (FD-Q20C) and circulating pump, which measures amount of water added from a 120-gallon (A.O. Smith) hot water tank into the substrate. The mixers heat the substrate up to 98c through their closed loop hydronic heating jackets. The Reimers (RHC-360) Electric Steam Boiler feeds steam to the Cascade Flow Control Solutions Heat Exchanger (263450-004) which heats the hydronic jacket loop. A steam actuating valve (STERLCO D151-F) modulates steam flow from the boiler, maintaining optimal jacket temperatures and pressure needed to reliably pasteurize substrate. After pasteurization, the substrate is cooled via the jackets which are isolated and chilled through a two-stage Thermaline Heat Exchanger (T8 S-20). The first cooling stage transfers substrate heat to municipal water. The heated municipal water is collected in the 120 gallon water tank for later use in substrate hydration. The second cooling stage uses glycol chilled by a G&D 10 HP (GD-10H-HT) unit to rapidly reduce substrate temperature for inoculation. Inoculation is performed through a hatch under sterile Air Science flow hoods (36" and 24"), providing clean, positive-pressure air to prevent contamination. Substrate packaging takes place at the bottom of each vessel through an 8" pneumatic actuating valve in unicorn bags, long tubes, or by connection to another system. Mixer #2 uses a Spartan Controls automated control package to manage processing parameters like mixing, heating, cooling, and packaging via integrated sensors and pneumatic valves. Mixer #1 is manually operated. Sterile air filters from Davis Controls maintain sterile positive-pressure conditions in the mixers throughout the entire process. The steam and hydronic system include Axiom DMF-300 and CBF-2 chemical dosing units to maintain system pressure, fluid levels, and chemical treatment of jacket water. Supporting components including solenoid valves, expansion tanks, gauges, and pipework in steel, stainless, brass, copper, and PEX ensures durability and resistance to temperature fluctuations. Boiler chemicals in the heating loop and inhibited glycol in the chilling loop protect the system from oxidation. The integrated system enables efficient, scalable, and consistent production of high-quality mushroom substrate with reduced labor cost and precise control over all critical processing parameters.

Unused Ruhrpumpen ZW 18×14×17(A) Split Case Pump | 8,000 GPM | 150 HP | Industrial High-Flow Pump

Unused Ruhrpumpen Split Case Pump, Size ZW 18X14X17(A). Rated 8,000 GPM at 1.5 bar (22 PSI). 1 stage. Driven by a 150 HP, 990 RPM, 3/50/400V motor in a TEFC enclosure. Built 2024.

Used Kaeser TCH35 Refrigerated Compressed Air Dryer | 124 CFM | High-Pressure In

Used Kaeser TCH35 Refrigerated Compressed Air Dryer | 124 CFM | High-Pressure Industrial Air Drying. Rated 124 cfm at 230 max psig, 37 to 115 degrees F ambient temperature. R-134a refrigerant, max charge 1.85lbs, max working pressure 300psig. 115v/1/60Hz requirements. Serial# 1378, built 2013.

MFR: Kaiser

Used CompAir CNC125 Refrigerated Compressed Air Dryer | 125 SCFM | Industrial Co

Used CompAir CNC125 Refrigerated Compressed Air Dryer | 125 SCFM | Industrial Continuous-Duty Moisture Removal. Unit is rated for 125 SCFM (215 m3/h) airflow capacity at 100 PSIG (6.9 bar) 100 degree F ambient temperature. R-134a refrigerant 21oz (0.80kg) charge. Equipped with factory-installed controls and safety devices. Serial# RC2J4125AB1A2NA11010.

MFR: CompAir

Used Ellerwerk Basket Centrifuge – Stainless Steel, 8.8 Liter Capacity

Used- Ellerwerk Basket Centrifuge. Stainless steel construction. 2300 RPM. 8.8 liter (approx. 2.3 gallon) capacity. 50 degrees C (122 degrees F) max. operating temperature. 6 bar operating pressure. 15mm impeller diameter. Built 1986.

MFR: Ellerwerk

Unused Evoqua OSEC B-Pak Hypochlorite Generator Skid – 500 lb/day System for Sale

Unused Evoqua OSEC B-Pak Series Hypochlorite Generator Skid, 500 lb/day. Complete with pumps, electrolyzer cell, Neeltran Inc. Transformer/rectifier, control systems, hydrogen disengagers, cables, and extensive documentation. The system produces a dilute hypochlorite solution 1.0 wt% concentration using brine (salt), water and electricity in an electrochemical process. With an embedded process controller, the system is fully automated minimizing the need for an operator interface. The OSEC hypochlorite generation system, an inherently safe alternative to chlorine, commercial bleach, and chlorine tablets, produces a dilute and stable sodium hypochlorite solution that does not require handling of any hazardous chemicals. Applications include municipal drinking water and wastewater, industrial wastewater, data center cooling, food and beverage, commercial aquatics, pools, theme parks, and more.

Used Belmer Winkle Press Dewatering Belt Press VPK 2S | High-Capacity Sludge Dewatering System

Used Belmer Winkle Press Dewatering Belt Press VPK 2S | High-Capacity Sludge Dewatering System. Belt working width measures 1500 mm (48") x 15500 mm (50 4") long. 2 x 21 spray nozzles. Water pressure 6 bar (90 PSI), 18 x 188 mm (7.33") Dia driving rolls. Belt speed 2.61 m/min (85"/min), Stainless steel frame. Unit features hydraulically controlled belt tracking device. Includes (1) 4 kW / 6 HP, 400V powerpack feeder belt drive. 1.7 kW / 2.3 hp, 460V main press belt drive with variable speed control (1) Sludge pump, (1) Polymer station (1) Control panel. Overall dimensions 5600 mm (182") long x 2534 mm (823") width (transport width) x 2250 mm (73") high, Weight empty 9.5 tonnes. Operating weight 10.5 tonnes. Previously used in a WWT application. New 2022. Our freight specialists can assist with freight and customs documentation to ensure smooth transition.

Bunting Overhead Metal Detector – Industrial Conveyor Metal Detection System

Unused Bunting overhead metal detector, never installed. Unit is designed for overhead installation in material-handling or conveyor applications to detect ferrous and non-ferrous metal contamination in compatible bulk products. Possible applications and suitable products include metal detection in recycling, plastics, wood, aggregates, food ingredients, and other compatible conveyed bulk materials.

MFR: Bunting Magnetics Co

Bollegraaf HBC120 Horizontal Channel Baler – Recycling Baler 90KW

Used 2013 Bollegraaf Recycling Machinery horizontal channel baler, model HBC120/90KW, serial number 03402-0010-02. Unit produces bales approximately 43.3" wide x 28.3" high with adjustable bale length and includes wire feed frames and control panel. Manufacturer technical data for the HBC120 lists a 90 kW drive, approximately 119.7 tonnes of baling force, an approximately 63" wide feed opening, and published throughput of approximately 16.2 tonnes/hr at 30 kg/m3 bulk density, 25 tonnes/hr at 50 kg/m3, and up to 47 tonnes/hr at 100 kg/m3. Published specifications also indicate bale weights up to approximately 1,000 kg and a cycle time of approximately 19 seconds excluding wire tying. Actual throughput and bale weight depend on material type, bulk density, feed consistency, and operating conditions. Possible applications and suitable products include high-capacity baling and compaction of compatible paper, cardboard, plastics, and other recyclable material streams.

BloApCo 5-Shaft Cardboard Shredder with Infeed & Discharge Conveyors

Used BloApCo 5-shaft industrial cardboard shredder equipped with a 30 HP motor, infeed conveyor, and discharge conveyor. Multi-shaft configuration is designed for continuous size reduction of corrugated cardboard and packaging materials, with conveyorized feeding and discharge for integration into recycling or material-handling operations. Possible applications and suitable products include shredding corrugated cardboard, boxes, packaging waste, and other compatible fiber-based materials for recycling, waste reduction, or packaging reuse.

MFR: Bloappco