Used Leepack AW-590IV Servo Powder Auger Filler

Used- Leepack Servo Drive Powder Auger Feeder, Model AW-590IV. Mitsubishi model MR-JZS-200A servo drive. Foot pedal switch. Level sensor. Mounted on stainless steel frame with casters. 3/60/480 Volt.

MFR: All Fill

Used SealerSales CBS-880 Continuous Band Sealer – 630 in/min, 1/2" Seal Width (2013)

Used Sealersales Continuous Band Sealer, Model CBS-880. 6" to 12" bag height (vertical). 630 inches/minute sealing speed. 1/2" seal width. 5-1/4" wide x 30" long conveyor. Aiset XMTE1000-2 HMI. 110v / 60hz requirements. .65kw motor. Serial# 1111113121994, built 2013. Overall dimensions 34" 14" x 22"T.

Used Sealed Air (Cryovac) VS26 Semi-Automatic Skin Packaging Machine – Stainless Steel

Used- Sealed Air (Cryovac) Semi Automatic Skin Packaging Machine, Model VS26. Machine is rated for speeds up to 15 packs per minute (depending on configuration) or appx 1.5 cycles per minute. Has seal chamber dimensions of 670mm W X 470mm L X 90mm T. Utilizes Cryovac brand Darfresh films. Ambidextrous operation. Stainless steel construction, mounted on casters. 13.8 kW, 25A, 3/60/460V.

MFR: Cryovac

Used Shionogi Qualicaps Quali-Fill Semi-Automatic Capsule Filler 15,000 CPH

Used Shionogi Qualicaps Quali-Fill Semi-Automatic Capsule Filler, Model QUALI-FILL. Up to approximately 15,000 capsules per hour depending on the application. Compatible with capsule sizes 00, 0E, 1, 2, 3, 4, and 5. Stainless steel construction. Built-in Becker vacuum pump, SMC regulators for Closing Station, Hopper Swing, and Rotation Module (0150 PSI), Dwyer flow meter, Variable Auger Speed dial, Variable Fill Table Speed dial. Serial # 87-004. 3/60/220V. Approximate OAD 60" long 50" wide 60" tall, 1,500#.

Used Prospect Machine PM600VD Tablet Vacuum Deduster 80,000 TPH

Used Prospect Machine Tablet Vacuum Deduster, Model PM600VD. Product throughput is 60,000 to 80,000 tablets per hour. Gravity fed, Adjustable air regulator. Stainless steel base with casters. Serial # 004, Built 2013. Approximate OAD 40"x 20"x 35".

Buy Used Glue Dots SD-900 RH Adhesive Dot Applicator – Inline Labeling Unit

Used Glue Dots Adhesive Dot Applicator (Top Labeler), Model SD-900 RH, Serial No. SD-900-CR-2011-017. Unit manufactured in 2011. Electrical requirements 120 volts AC, single phase, 60 Hz, 5 amps full load.

Unused ABOX CFX 130 Cotton Dispenser – Pharmaceutical Packaging Equipment

New / Unused ABOX Automation Cotton Dispenser, Model CFX 130, S/n CFX-1054, Year 2021 (No Conveyor)

Used Automated Case Packing System | Lantech Erectors, BoxSizer & Conveyor Packaging Line

Used- Case Packing Automation System. System consists of (2) Lantech case erectors, a model C-1000T, and C-2000T. (2) Altech label printer applicators. Conveyor arrangement brings cases to pack stations. (4) pack stations. Conveyors bring filled cases to BoxSizer. Westrock BoxSizer includes Nordson glue system and 3 inch tape seal head. Altech label printer applicator. Conveyors bring cases to (2) paternoster lifts with 6 m height differential.

Used CO2 Cartridge Filling Line | Beverage Grade CO2 Cartridge Packaging System

Used- CO2 Cartridge Filling Line. Cleans and fills CO2 cartridges with 12 grams of beverage grade CO2. Capable of filling up to 1440 cartridges/hour. Line consists of a washer tank with infeed and outfeed conveyors, vibratory bowl feeder, CO2 flushing station, CO2 filling station, CO2 preparation unit, (2) Anritsu checkweighers, multiple Cognex cameras, a SCADA PC and controls, and conveyors.

Used Inclined Belt Conveyor – 26” Wide Belt | 126” Discharge Height | 153” Overall Length | Mild Steel Frame

Used- Inclined Belt Conveyor. Mild Steel Frame. Belt width: 26", Discharge Height: 126". The overall length from the discharge end to the end of the hopper is 153".

Automatic Capsule Filler with Tumble Dryer & Gelatin Melting Tank – HTSYS-5

Used- Huizhou Pingfang Capsule Filling System, Model HTSYS-5. Rated 5000-10000 units/hour; 10-500mg capsule size range; 64mm x 75mm rolling die size; 0-5RPM rolling die speed. (4) Pistons. Stainless steel construction. Controlled by touch-screen PLC. OAD: 820mm x 640mm x 1200mm. 220/380V. System includes: Water chiller, 100 liter Stainless steel gelatin melting tank/dosing tank, Air compressor, Tumble dryer; Capsule dry trays; Grinding tank; Rolling die; Capsule conveyor. Reported to have been test run once without product.

Used Techik TXR-6080SH X-Ray Inspection System – Pass-Through, 600mm Width

Used- Techik TXR Series X-Ray Inspection System, Model TXR-6080SH (made by TDI Packsys). 304 Stainless Steel. 600mm width, 300mm inspection height. Conveyor belt pass through style, 10-40m/min speed. On board computer and software package. USB interface. 220VAC, Manual included. Serial# T00160002, built 2014.