Used Lodige FM 130D Plow Mixer – 130L, Stainless, 4 HP, Frame Mounted

Used- Lodige Plow Mixer, Model FM 130D. Stainless steel construction; 130 liter (approximate 34 gallon) volume; 480 mm diameter x 670mm straight side (19" x 26") trough size; 300mm 520 mm (12" x 20") hatch size; 250mm (10") diameter outlet; Mounted on frame. 3 kW (4HP), 720 RPM, 220/440V motor. Built 1971. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Lodige

Used Freeze Dry Technology Tunnel Freeze Dryer – Food Grade Lyophilization System, -30°F to 165°F

Used- Freeze Dry Technology Tunnel Freeze Dryer. Approx. -30 to 165 degrees F temperature range. 120" long x 36" diameter chamber. Includes (24) trays. On casters. 240V. Previously used for food. Trays are 24"x36'', the unit(s) hold 24 trays each, 2 per shelf. All trays come with the unit. Does not include a vacuum pump.

MFR: Freeze Dry

Used Capifiltro Olive Oil DE Filter – Model BM-633, Stainless Steel

Used- Capifiltro Olive Oil DE filter, Model BM-633. Stainless steel Filter housing 50" Straight side X 4' Dia, 3 1/2" Diameter Stainless steel piping, 14" Diameter. discharge. 200 PSI @ 4 bar. Steel frame. Approximate dimensions 147" H X 14'6" L X 92" W. Approx. 8000 lbs. Last filtered Olive Oil

Used Zenitram DE Olive Oil Filter – Model CATR, Horizontal Plate Filter (2019)

Used- Zenitram DE Olive Oil DE Filter, Model CATR. MAH horizontal plates filter can filter between 2,000 and 30,000 liters of oil per hour. Serial# 292. Built 2019.

Used Kieselguhr DE Filter – Model NF-10, 10 m² Horizontal Disc Beer Filter

Used- Kieselguhr DE Filter Model NF-10. Includes AISI 304 filter vessel, filter discs, piping with butterfly valves and centrifugal pump, Piston dosing pump, Filter pack turning device, Lighted sight glasses at product inlet and outlet, Pressure gauges, sample valves and flow meters, Final filtration disc for residual liquid, Wheel mounted AISI 304 cake collection tray with 10 inch diaphragm pump for discharge. SST horizontal disk beer filter with centrifugal discharge. 10 sq meter filter with a 630-liter capacity bell with 7 Bar rating, and 175 liter dosing tub. Wheel mounted AISI 304 Stainless steel frame. Flow rate per manufacturer is 3-5 bbl/hour/meter, so 30-50 bbl per hour (16.5gpm to 27.5gpm). Electrics are 480 V, 3 Ph, 60 Hz, 34 Amp. Filter bell holds 5 bbls. 7 feet 4 inches tall, 7 feet 10 inches wide, 4 feet 5 inches deep. 1,800 pounds. Year 2002. Last used to filter beer.

Unused Stainless Steel S-1 Arc Filter Screen for Wet End Equipment – 1.3 m² Filtration

Unused- Stainless Steel S-1 Arc Filter Screen for Wet End Equipment. Filtration area 1.3 m2. Cleaning water volume 1.7 L/S. 316L SS Screen 704mm wide x 1820mm long x 0.05mm. 304 SS Pulp Feed Inlet Head, 316L SS Screen Plate, 304 SS Shell and Washing Device, Seam Width 50um. 6" Inlet, 6" fines outlet, 10" overs outlet. (2) Clamp-on cover (front and back). Control with Siemens Logo! 12/24 RC PLC. Mounted on (4) legs. Serial# 2022-01-1-0301. Built 2022. MFG - Shandong Tianli Machinery.

Alfa Laval UVNX-945B-11G Solid Bowl Tricanter Centrifuge. used.

Used- Alfa Laval UVNX-945B-11G Solid Bowl Tricanter Centrifuge. 316 Stainless steel construction (product contact areas). Maximum bowl speed 2900 rpm. Single row of lined cake discharge ports, single lead conveyor, base, casing, gearbox, feed pipe.45 kw, 400-690/3/50-60 main drive motor & gearbox. Back drive system. Mounted on a stand with 4 legs. Control panel. Previous used in an olive oil application .Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Alfa Laval

Industrial Thermal Oxidizer with PLC Controls & Venturi Scrubber – Griffith, 2.5MM Btu/hr

Unused- Griffith Consulting Thermal Oxidizer/Quench/Venturi Scrubber System, Natural Gas, Horizontal. Burning Capacity 2.5MM Btu/hr maximum burner capacity, 1450 degree F operating temperature. Exhaust Stream: 1500 scfm air, 1.4kg/hr Combustible Compounds, 750 scfm at 500 to 600 degrees F from cold auger furnace, 750 scfm at 900-1000 degrees from hot auger furnace. VOC destruction efficiency 98%. Control panel with PLC/HMI, flame safeguard, high temp limit switch. Hot gas Quench. Venturi Scrubber. Sump Tank. 20HP blower. New and delivered: June 2023.

Used Dinies UV-C Seed Disinfectant System – Model Jumbo Naiopur 1 – 99.9% Disinfection – 625W UV-C – Built 2021

Used- Dinies Technologies UV-C Seed Cleaning Disinfectant System, Model Jumbo Naiopur 1. Up to 99.9% disinfection; 625 W UV-C power; 1920 W lamp power; (1) UV section; 1200mm L x 800mm W (approx. 47.2" x 31.5") disinfectant zone size; 900mm (35.5") working height. 60/110V. Built 2021. OAD: 96.2" L x 47.3" W x 49.9" H. Previously used for hemp seeds.

COMAT M22TR Mozzarella Cheese Molding Machine – 2500 kg/hr, Pre-Hardening Heads Included

Used- COMAT Mozzarella Molding Machine, Model M22TR. Rated 4400-5500 lbs/hr (2000-2500 kg/hr). Includes (2) 8oz and (2) 16oz molding; Components included: pre-hardening heads; water chilling unit; CIP System. OAD: Approximate 6' H x 10' W (not including CIP/water chiller). 3/50/220V.

Used APV Spray Dryer 3PSBD 58 – 316 Stainless Steel, 35-120 kg/h Capacity

Used- APV Spray Dryer, Model 3PSBD 58, 316 Stainless Steel. Installed unit including heating elements, filter, controls. Drying chamber size 58, approximate volume 21.73 m3. Production rate: Due to test more kinds of nozzles and different conditions, we oscillated in powder production rate form 35 to 120kg/h. Inlet temperature main drying air: 0-600 degrees C ( We often used max. inlet temp. 420 C). Maximum outlet temperature 140 degrees C. Includes Herding dust collector, cyclone and blower. Dimension 4200 x 2250 x 2300mm (LxWxH). Gross weight: 1880kg, Net weight: 1580kg. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: APV

Alfa Laval CONTHERM 6X3 Scraped Surface Heat Exchanger.

Used- Alfa Laval CONTHERM 6X3 Scraped Surface Heat Exchanger. Stainless steel. 3 Ft2 (0.28 m3) heating surface area. Design pressure 450 PSI (30 bar), Working pressure 225 PSI (15 bar) at 375 deg F (190 deg C). Complete with control panel and additional infrastructure. Previously used in a dairy application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Alfa Laval