Used – Ohmstede 1083 sq. ft. Vertical Shell & Tube Heat Exchanger – Carbon Steel Shell, 304L SS Tubes

Used Ohmstede 1083 sq. ft. Vertical Shell & Tube Heat Exchanger Carbon Steel Shell, 304L SS Tubes. 304L stainless steel heads. 245 psi @ 250 degrees F. shell. 58fv psi @ 400 degrees F tubes. 1" tube diameter. 10'0" tube length. (428) tube holes. 1.25" tri tube pitch. .065" tube wall. 1 pass shell. 1 pass tubes. NB code. Aem tema type. 2", (2) 4" shell nozzles. 2", (4) 3", 6", 10", 16" tube nozzles. (15) baffles. 6.5" baffle spacing. 2'6" shell diameter. 18'4" overall length. Built 1999.

MFR: Ohmstede

Used North Star M20-SS-2014 Flake Ice Maker – 11 Tons/Day | R-717 Ammonia | Stainless Steel | Built 2014

Used- North Star Ice Stainless Steel Elite Flake Ice Maker, Model M20-SS-2014. Rated 11 Tons/day. R-717 Ammonia Refrigeration. Serial No: 2769. Year of Manufacture: 2014. Previously Refrigerant: R-717. Freezing Surface: Stainless Steel. Suction Line: 2-1/2 in. Liquid Line: 1-1/4 in. (1) 1/2 HP Pump Motor. (1) 1/2 HP Drive Motor. Dimensions: 84" L x 56" W x 49" H. 3,500#.

MFR: Northstar

Unused Alfa Laval Alfa Nova 52-20H Fusion-Bonded Plate Heat Exchanger – 100% Stainless Steel

Unused- Alfa Laval Alfa Nova Fusion-Bonded Plate Heat Exchanger, Model 52-20H, 100% Stainless Steel. Approximate 11 Square Feet. Gasket free copper free, 20 plates, approximate 4" x 20". 1" Diameter internal thread product ports, 3/4" external cooling or heating ports. Temperature S: -196 degrees C. (-302.8 F.)/225 C. (437 F.). Pressure S: (S4S3) -1 bar (-14.5 psi)/26-30 bar (377-435 psi), (S2S1) -1 bar (-14.5 psi)/21-25 bar (304-362 psi). Pressure T: (S4S3) 45 bar (652 psi), (S2S1) 37 bar (536 psi). Serial# 43659870, Built 2015.

MFR: Alfa Laval

Used Conair Tempro Portable Air-Cooled Chiller – 11 Ton, 10 HP, Industrial Cooling

Used- Conair Tempro Portable Air Cooled Chiller, Model AC1-10. Approximate 11 Ton Capacity. Approximate 47 gallons per minute at 36 psi. Operating temperature 20 - 65 degrees F. Compressor 10hp, R-22 refrigerant. Process pump 1.5hp, (2) 1hp fans. Approximate space heating capacity 171. 10,000 CFM. 2" Connections. Mounted on casters. Serial# 95A025. 3/60/460 Volt.

MFR: Conair

Hosokawa Alpine AG (BEPEX) MS 300 Briquetter Compactor – 9–50 T/H, 300 HP (Used, 2020)

Hosokawa Alpine AG (BEPEX) MS 300 Briquetter Compactor 950 T/H, 300 HP (Used, 2020). Capacity 9-50 tonnes/hour. (2) 27.7" (712 mm) diameter x 11.1" (286 mm) straight side by side rolls. Nominal press force: 3,000 kN. Gearbox driven by an approx. 300HP/200 kW-50cycle-3Ph-1485 RPM motor. Screw feed and controls. Frame mounted. New 2020. Previously used in a Ceramic application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Hosokawa

Used Komarek Greaves (BEPEX) MS 150 Briquetter Compactor – 125 HP Hydraulic Drive – Dual Pocket Rolls

Used- Komarek Greaves (BEPEX) MS 150 Briquetter Compactor. 11.25" wide briquetting rolls x 20" diameter. 2 rows of pockets. Pockets are roughly 5 1/8" long x 5/8" wide. Equipped with large KG Gear Reducer, 1188 RPM Input, 33:1 ratio. 125 HP hydraulic drive, variable speed on the rolls. 25 HP hydraulic drive for heavy duty auger feed, vertical shaft. Feed Hopper- 48" diameter x 34" straight wall x 34" cone. Entrance chute has lining for wear. Overall dimensions 12' long x 80" x 60" high. Dimensions do not include the two drives or the feed auger. Previously used in a Carbon, Coke, Coal, Graphite application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Komarek Greaves

Used Westfalia AD-0509 Solid Bowl Decanter Centrifuge – 4500 RPM, 316 SS

Used- Westfalia Solid Bowl Decanter Centrifuge, Model AD-0509. 316 stainless steel construction (product contact areas). Bowl diameter 300 mm, maximum bowl speed 4500 rpm, 4" single lead with welded hard face, lined cake solids discharge ports with cake flingers, ring liquid dam plates, base, casing gearbox, feed pipe with poly addition port, approximately 15hp main drive motor, 2.2 kw (2.9hp), 220/380/3/50 back drive. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Westfalia

Thermo Scientific (Kendro Lab Products) Model VT 6025 Vacutherm Oven

Used- Kendro Lab Products (Thermo Scientific) Vacutherm Oven, Model VT 6025. Stainless Steel inner container. Approximately 25 liter inner volume. Operating temps up to 200 degrees C (392 F). Vacuum up to 0.01 mbar. Approximate inner compartment 300mm wide x 275mm tall x 307mm deep. Approximate 110mm distance between shelves. 1/50/60/230 volt, 5.9 Amp requirements. Serial# 40313275.

CB Mills RH Series Horizontal Media Mill – Model RH-045 for Sale

Used- CB Mills RH Series Horizontal Mill, Model RH-045, 45 Liters continuous throughput. Grinding beads filling rate; 34.50 - 39.10 (equivalent to 75-85% liters). Maximum product pressure; 2.5 bar (~37 psi). 85 degrees C maximum product temperature. Driven by a 50 hp, 3/60/460V, 1180 rpm, XP motor. 1" Stainless steel pump station. Double mechanical shaft seal. UL "Listed" electrical panel with PLC controls. Water jacketed vessel. Medial cart. Suitable for glass through all types of ceramic media, (YTZ Media Type ZY 0.6-1.0mm). Mill serial # 058UW-000. New in 2023.

MFR: CB Mills

110 Ton Air-Cooled Trane Chiller, Model RTAA

Used- 110 Ton Air-Cooled Trane Chiller, Model RTAA. R-22 refrigerant. 460 volt, 60 HZ, 3 phase.

MFR: Trane Co

Used Carbon steel double ribbon blender has 80 cu. ft. of working capacity. Unit has an open top and a 4” end discharge. Driven by a gear-reduced 25 hp, 1760/132 rpm motor that requires 220/440 vac, ...

Used-Carbon steel double ribbon blender has 80 cu. ft. of working capacity. Unit has an open top and a 4” end discharge. Driven by a gear-reduced 25 hp, 1760/132 rpm motor that requires 220/440 vac, 3 ph electricity. Outer ribbon is 40” in diameter with a 4” diameter shaft. Mixing chamber is 40” w x 116” l x 46” h for a total volume of about 110 cu. ft. Overall height is about 95”. Last used mixing 6200 lbs of product.

Used Blaw Knox 1,100 sq ft shell and tube heat exchanger. National Board # 6118. Rated for 40 psi @ 250° F shell and tube sides. Stainless steel shell and tubes,168- .75" outer diameter tubes x 161" ...

Used-Blaw Knox 1,100 sq ft shell and tube heat exchanger. National Board # 6118. Rated for 40 psi @ 250° F shell and tube sides. Stainless steel shell and tubes,168- .75" outer diameter tubes x 161" overall length (note five tubes have been plugged), 24" diameter shell side has 10" and 18" flanged connections, tube side has 3" and 3" flanged connections. There is a collection chamber on the bottom with 2 view port and two nozzles. Previous use was chemical.

MFR: Blaw Knox