Used USA Lab HC-5/10 Circulating Chiller & Heater – 5L, 30L/min Flow

Used- USA Lab Model HC-5/10 Circulating Chiller & Heater. Pump flow rate 30L/min. 5L Reservoir capacity. Refrigerating BTU's 4,500 to 1,000. Heating Power 1000 W. Batch# 20050258. 1/60/110 Volt, 20 Amp. Built 2020.

Used Maja FP100 Meat Slicer – 19 kW Stainless Steel | 130 Slices/Min | 600 mm Max Cut

Used- Maja Meat Slicer, Model FP100. Stainless steel. Cuts 40-130 slices per minute. The maximum cutting thickness is 23.4" (600 mm). Driven by a 19 KW-400Volt/50Cycle/3PH Motor. Overall dimensions 67" (2060 mm) long x 45" (1380 mm) width x 61" (1850 mm) high. Weight 1.5 tonnes. Serial # 45585. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Used Northland Stainless 100-Liter Inconel I-622 Reactor – 45 PSI MAWP – Agitated – Mobile on Casters

Used- Northland Stainless, Inc., 250 liter (65 Gallon), Reactor. Constructed of I-622 Alloy, Rated for a maximum allowable working pressure (MAWP) of 45 PSI/Full Vacuum at 350 degrees Fahrenheit. Jacket rated for 125 PSI at 350 degrees Fahrenheit. Multiple top inlets, clamps and probes, dished bottom. Forklift ready, mobile on casters. National Board number 3296. Serial number 0215631-1. Manufactured 2003. Includes Lightnin agitator with control panel. Previously used in biotech operation

MFR: Northland

Used Krauss Maffei Conical Dryer Model TMD 0.25/160 – Stainless Steel 316Ti, ATEX

Used Krauss Maffei Conical Dryer, Model TMD 0.25/160 "Titus-Mixer-Dryer," constructed from stainless steel 1.4571 (316Ti). This unit features a working pressure of 3 Bar (43.5 PSI) (vacuum possible), jacket working pressure of 6 Bar (87 PSI), and a capacity of 380 Liters (useful capacity 250 Liters). The cone measures 1016mm (40") in diameter and 1066mm (42") in height, with a dished top and a jacketed mixing screw (6 Liters). Powered by a 4.0 kW + 1.5 kW motor, 380 Volt (explosion-proof), and a jacket volume of 96 Liters. It operates at a maximum temperature of 165C and has a 150mm (6") bottom outlet. Manufactured in 1995, the dryer is mounted on a frame, includes switchgear, and is ATEX compatible. Dimensions are 2.0m x 2.0m (6.6' x 6.6') with a total height of 3.5m (11.5'), weighing 2650 KG. Serial Number 7005/742904/3.

MFR: Krauss Maffei

Used Insta-Pro Model 2000 Continuous Expeller Press – Oil Extraction

Used Insta-Pro Model 2000 Continuous Expeller Press-Used. 7.2:1 cage-length-to-cage-diameter ratio, equipped with a vertical screw feed. Equipped with a 30 HP main drive and 3 HP feed drive. Designed for mechanical oil extraction from oil seeds such as soybeans, canola, and sunflower seeds. This unit includes a belt-driven drive.

MFR: Insta-Pro

Used Insta-Pro Model 2000 RC Continuous Extruder – 125 HP Motor, High-Capacity Processing

Used- Insta-Pro Model 2000 RC Continuous Extruder. Rated capacity approximate 1,300 - 3,840 pounds per hour. Includes extruder barrel and main worm shaft assembly. Driven by 125 HP motor.

MFR: Insta-Pro

Used Guoxin GX-12-4 Hemp Dryer – 69 Sq. M Drying Area, 27.75 kW Power

Used- Guoxin Hemp Dryer; Model GX-12-4; Drying Area 69 square meters; Spread thickness of material 50-200mm; Working temperature 0-120 degrees C; Drying Time 0.5-5 hours; 22 kW Induced Draft fan; 2.2 kW Exhaust fan; 3 kW Feeding Conveyor; 0.55 kW Discharge Conveyor; 27.75 kW total power; Dimensions: 23m x 5.5m x 2.8m.

Used Hosokawa Alpine Turboplex ATP 315/3 Ultrafine Air Classifier System – Ceramic Lined, 6–150 Micron, 3-Wheel High Efficiency Design

Used Hosokawa Alpine Turboplex ATP 315/3 Ultrafine Air Classifier System Ceramic Lined, 6150 Micron, 3-Wheel High Efficiency Design. Ceramic lined classifying wheels and vessel for abrasive applications, rated for fineness of 6-150 micron, feed rate of 1500-7500 kg per hour, featuring (3) 315mm diameter classifying wheels, each rated for 400-4000 rpm speed and 11kW motor through V-belt drive (33 kW total). Scale up factor of F=7.5, air flow rate of 9000 m3/h, fines yield of 1 t/h at 8 ?m, 2.1 t/h at 20 ?m, 3 t/h at 45 ?m. With Hokokawa Alpine High Performance Filter Baghouse Dust Collector, Reitz Ventilatoren High Performance Blower, driven by 90 kW motor, rated for 125 m3/min air flow, 3 PSI static pressure.

MFR: Hosokawa

Accu-Systems Miter Door CNC Machining Center, Model MMTJ

Used- Accu-Systems Miter Door CNC Machining Center, Model MMTJ. 3 Axis control for high quality joints and flexibility in machining various sizes of profiles (X, Y, and Z); 2 working zones; 3 HP high frequency spindle for mortise (24,000 RPM); 6 HP high frequency spindle for tenon (18,000 RPM); 1" x 3.5" machining capability; Heavy duty 1900 lb. frame; 1" thick machined aluminum work surface. Serial# 037-05-MMTJ-3. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Shenzhou Desludger Disc Centrifuge, Model DHC730

Unused- Shenzhou Desludger Disc Centrifuge, Model DHC730. Stainless steel construction (product contact areas); Maximum bowl speed 4500 rpm; separator design; 7712 separation factor; 25~35 m3/h capacity (according to different materials); 55 kW (73.75hp) drive motor; control cabinet; PLC. Currently disassembled.

Unused Electromagnetic Roaster – Model TD-G650 | 650L Capacity | 0–400°C | 1 RPM | 3/50/380V | Zhengzhou Tonde

Unused- Electromagnetic Roaster, Model TD-G650. 650 liter Capacity Range. 1rpm/minute rotation range. 0-400 Degrees C temperature range. 3/50/380 volt requirements. Made by Zhengzhou Tonde

Electromagnetic Roaster, Model TD-G650

Used- Electromagnetic Roaster, Model TD-G650. 650 liter Capacity Range. 1rpm/minute rotation range. 0-400 Degrees C temperature range. 3/50/380 volt requirements. Made by Zhengzhou Tonde