Used Stalam APEX 7 Radio Frequency Sterilizer for Sale

Used Stalam APEX 7 Radio Frequency Sterilizer. 7 kW. Throughput: Treats 0.5 - 2.3 kg/batch (1-5lb/batch). Processing Time: 14 min average cycle time. RF Frequency 27.12 MHz. Siemens Simatic HMI. Serial# 2464/1. Built 2019. 3/60/277/480 Volt. Product Applications Cannabis and Hemp Flower.

Used General Boiler Electric Steam Boiler 504 kW / 1,773 lbs/ hour. – 480V Industrial Boiler

Used General Boiler, Electric, Series L, Model GE504-CS-480-3-H-COMBO. Output: 504 kW / 1,773 lbs/ hour. Rated 15 psi, Power: 480V, 3-phase, 607 amps, Dual feed pumps, Carbon Steet construction. ASME H certified. Control panel. Unitized on common base. S/n 3148. Yr. 2013

Used Krupp Werner & Pfleiderer KP-120/250 KombiPlast Compounder with ZS-B 120 Side Feeder

Used- Krupp Werner & Pfleiderer GmbH KP-120/250 KombiPlast Compounder. 6:1 L/D. (1) 250 mm diameter screw x 1500 mm long. screw speed: 4,74-47,5 rpm. Electrically heated. Driven by a 88 kw (132 hp) DC drive motor via a gear box. (1) Die head, Frame mounted. (1) Krupp Werner & Pfleiderer GmbH ZS-B 120 Side Feeder, screw speed: 36.5-365 rpm. Frame mounted. Complete with control panel and additional infrastructure. Weight 22 tonnes. New 2004. Our Freight Specialists can assist with any customs documents and forms to insure a smooth transition.

MFR: Werner & Pfleiderer

PET Sheet Extrusion Line – 48” Wide, 2,000 lbs/hr, OMV D140 Extruder, (Used)

Used- PET Sheet Extrusion Line Capable up to 48" Wide, currently has 32"W Allied Flex-Lip Extrusion Die. 2,000 lbs/hr, OMV D140 Extruder (Used) 350 HP main motor; 30 HP drive system; Rated up to 2,000 lbs/hour (dependent on material and configuration); Multi-zone cooling rolls; Chrome-polished roll stack. OMV Single Screw Extruder, Model D140 6P. 6" diameter. SN 01087; 3/60/480V. Built 2001. With Operating panel, Conveyor, Draw rolls, Temperature control system, Chiller, Vacuum loader, and Winder/accumulator.

Used Alfa Laval Aldec-G2-40 Solid Bowl Decanter Centrifuge – 316SS, 4000 RPM, 40 HP, Wastewater Application

Used Alfa Laval Aldec-G2-40 Solid Bowl Decanter Centrifuge 316SS, 4000 RPM, 30 HP, Wastewater Application. Maximum bowl speed 4000 RPM. Single row of lined cake discharges ports with wear liners, liquid plate dams, base, stainless steel casing, gearbox, Approx 40 HP, 460 Volt Baldor, main drive motor. Frame mounted on (4) legs. Mfg. 2007. Previously used in a wastewater treatment application.

MFR: Alfa Laval

Used HJM Precision Ignition Cartridge Non-Destructive Inspection Machine | PLC Controlled | 3-Axis Robot | Built 2019

Used- HJM Precision, Inc. Ignition Cartridge Non-destructive Inspection Machine. The machine has been designed and manufactured for the purpose of inspecting Ignition Cartridges for leaks. It is controlled by a PLC with an HMI for the operator to move the machine in manual mode for homing, clearing product, cleaning, etc., and to operate the machine in automatic mode. The cartridges are loaded into the machine in an input tray. The cartridges are then placed in test chambers by means of a robot. The chambers are moved to the test position. Covers lower to the top of the test chambers and nozzles extend to the test chambers near the bottom. Three axis robot system consisting of three slides and a gripper. The robot moves in X, Y , and Z directions with X being the length of the machine, Y across the machine, and Z vertical. Four test chamber blocks on the dial plate. Each of the test chamber blocks has four chambers in them. Gilmont flow meters and Hoke needle valves are used to calibrate the machine. New in 2019.

Used Trailerized Silver Refining System | Amprep Maxxi-Cell | Fume Scrubber | Diesel Generator | Mobile Lab

Used Trailerized Silver Refining System | Amprep Maxxi-Cell | Fume Scrubber | Diesel Generator | Mobile Lab. Consisting of: Amprep Silver Maxxi-Cell silver cells; Crystal Washer; Bleed-feed system; Harrington Dual-Stage Fume Scrubber; Atmospheric Evaporator. Powered by a 6068 HF485 diesel engine and a Stamford generator head, rated 37.5 kva (904 hours) 3ph/208V, with stationary magnets and 275 gallon fuel tank. Equipment housed in a trailer w/ hydraulic rams to open sides of trailer in operation.

Used York Chiller Starter/Control Panel – 4160V | 60Hz | Built 2017 | High Voltage Control

Used- York Chiller Starter/Control Panel. 4160V nominal rated voltage; 4576 max. continuous voltage; 3744V min. continuous voltage; 60Hz. Built 2017.

MFR: York

Used GEA Westfalia UCD 205-00-02/32c Decanter Centrifuge – 5500 RPM, 2-Phase, Stainless Contact, WWT Application – 2011

Used- GEA Westfalia UCD 205-00-02/32c Decanter Centrifuge. Stainless steel construction (product contact areas), max bowl speed 5500 rpm, 2 phase separation (liquid/solids) design, single row of lined cake solids discharge ports, base, casing, gearbox. On 4 legs. Previously used in an WWT application. Serial# 8860-355, built 2011. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Westfalia

Unused Ethanol Distillation Packed Column System – 25' High with Enerquip Heat Exchangers

Unused- Ethanol Fractional Distillation Packed Column, 25' High. (1) Enerquip Shell & Tube Heat Exchanger, reboiler, model HX 14/30 x 96 BKUH, 304L, 6 FLG. (1) Enerquip Shell & Tube Heat Exchanger, Condenser, Model HX 20 X 72 BEUBV, 304L, 6 FLG. Includes auxiliary equipment.

New MKM CD 250 Atomizer – 9000–13,000 RPM, SS316 Spray Disk, RPM Sensors, Insulated Jacket

Unused / New MK Manufacturing Co, Atomizer, Model MKM CD 250 features a feeder cover, retainer, sleeve, and feeding pipe made from SS 316 stainless steel, all tested, machined, and balanced as required, the spray disk is also SS 316, precisely machined and balanced, the main shaft is constructed from special spring steel with centerless grinding for high precision, bearing housing is fabricated from mild steel with cylindrical surfaces to accommodate bearing seats, the shaft is driven by a V-belt pulley system, operating speed ranges from 9000 to 13000 RPM and includes RPM sensors and a digital display, the atomizer jacket is insulated with ceramic wool, air purging is provided to prevent sediment buildup and ensure continuous spray dryer operation, lubrication is handled by an MKM make pump with motor, double filters, and gauges for continuous oil flow, the unit is supplied without a motor, compatible with a 25 HP, 2900 RPM flange-mounted Siemens or Hindustan motor, the atomizer pulley is made from SS 304 while the motor pulley is made from cast iron or mild steel. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

New MKM CD-210 Rotary Disk Atomizer – SS316, 19,000 RPM, F-35 Compatible, Includes Toolkit

New MKM CD-210 Rotary Disk Atomizer SS316, 19,000 RPM, F-35 Compatible, Includes Toolkit. Constructed of 316 stainless steel. The atomizer features key components in SS 316 stainless steel, including the feeder cover, retainer, sleeve, feeding pipe, and spray disk (?210 mm), all precision-machined and dynamically balanced at 19,000 RPM. The main shaft is spring steel, centerless ground for high concentricity and strength. The mild steel bearing housing includes precision-machined seats for alignment. Power is delivered via a V-belt pulley system. Operating speed matches existing F-35 units, with jacket and dimensions ensuring full interchangeability. An MKM oil pump system provides continuous automatic lubrication, with oil temperature maintained below 75C at 10 TPD. RPM range: 9,00018,000; vibration remains within specified limits. Includes RPM sensor/display and a maintenance tool kit with pullers, spanners, and locknut tools. Compatible with and replacement for an F-35 atomizer. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.