Plastics Equipment

Used Effytec HB-152 Simplex Horizontal Pouch Machine – 100 CPM

Used- Effytec Model HB-152 Simplex Horizontal Pouch Machine. Capable of speeds up to 100 cycles per minute. Pouch size range: width 60 mm - 150 mm (2.36" to 5.9"), height: 60 mm - 175 mm (2.36" to 6.89"). Max fill volume up to 350 cc. Max film diameter 450 mm (17.72") on a 70-75 mm (2.75"-2.95") diameter core. Has film print registration, tear notch, vacuum pump and effytec servo auger filler with level sensor. (3) Yasakawa ServoPak 200v drives, (3) Yasakawa V1000 drives. 3/60/230/460 volt. Last running nutritional supplement.

MFR: Effytec

Pre-Owned Effytec HB 101 Horizontal Pouch Packaging Machine for Sale

Used Effytec Horizontal Form, Fill and Seal Pouch Sealing Machine, Model HB 101. Unit is rated for speeds up to 110 cycles per minute. Pouch size range: width 40 mm - 100 mm, height 40 mm - 130 mm. Maximum volume 50cc. Has Omron NX-ECC202 PLC, (3) Omron MX2 inverter drives, color touchscreen HMI. Stainless steel construction. 3/60/480V.

MFR: Effytec

Buy Used Elliott Hot Melt Case Sealer – Top Sealing with Case Elevator & Indexer

Used- Elliott Hot Melt Top Only Case Sealer, Model 76-10 Custom. Nordson Problue glue system, Saturn right angle nozzles, infeed end of the machine is fitted with a case elevator, case infeed indexer, and case pusher. Was set up for bag-in-box sealing. Rated at 1,400 CPH. OSHA guarding and door interlocks. Integral PLC control panel (located on left side of machine). 460 volt/3-phase/60 hz.

MFR: Elliott

3. High-Capacity Elmar 36-Head Filler & 16-Head Zalkin Capper for PET Bottles – For Sale

Used Elmar 36 Station Filler Turret with Fowler Zalkin 16 Head Pick and Place" Capping Turret complete with Infeed Timing Screw, Infeed Starwheel, Intermediate Transfer Starwheel and Discharge Starwheel all mounted on a Monoblock Main Base with the following: 3-3/4" Diameter Super Extended Cylinders (max fill range 67 fluid ounces); 3-3/4" Diameter Stainless Steel "Dome Style" Pistons with PTFE Wear Rings and 0" Ring; Motorized Volume Adjustment; Adjustable Container Rails with Replaceable UHMW Wear Surface; Quick Change Feed Screw Toolless; Change Parts Toolless; Powered Bowl Height Adjustment (3-15/16" to 9-15/16"), for Instant Height Change-Over; Central Lubrication Cluster - Lincoln Automatic Lubrication System (manual pump); Complete Electronic Control System with A-B 5/05 PLC and Operator Station with Allen-Bradley InverterDrive System , 480V/3PH/60HZ; The Elmar Industries Inc. Filler Control system is a programmable logic controller (PLC) based control system. The basic unit controls filler speed, fill volume and the No Container No Filler (NCNF) trip mechanism. Fowler/Zalkin 16-head "Pick and Place" Capping Turret (PCD 498 mm) to mount on a Elmar filler Monoblock. This turret is equipped for the application of 63 mm, screw-on closures to PET bottles, at a rate of applied closures per minute. This machine is equipped as follows: Set of Sixteen (16) Zalkin BH-3 Hysteresis magnetic clutch heads for screw-on closures requiring an application torque of 12 to 36 inch pounds +-10%; Heads are equipped for use with quick change chucks for cap handling and application; Set of Sixteen (16) quick change chucks for the 63 mm screw-on closure. Quick change chucks use a ball and ring assembly for quick release from, and remounting to, the capping head; Telescoping cap chute suitable for the 63 mm closures and suitable for mating with "Nose Over' chute; Cap chute steam cloud box (15" x 3' x 4 long) and cap transfer steam manifold, supplied to heat cap prior to application; Quick Change "Peg & Ring" cap transfer system for smooth closure pick-off from the discharge of the cap chute and transfer to the capping heads. Transfer system is equipped with quick change quick release features to allow for no tools change-over. Transfer system includes sensors for no bottle/no cap control.; Self-contained elevating system for adjusting height of capping turret as required by differing heights of containers. Safeties are included to prevent travel beyond machine limits. Minimum 4", maximum 12" height of container.

MFR: Elmar

Pre-Owned Enflex Model F11DX Horizontal Form Fill Seal Machine

Used- Enflex Model F11DX Duplex Horizontal Form and Fill Seal Machine. Capable of speeds up to 220 pouches per minute (depending on application). Pouch size range: 40mm - 70mm (Width) x 40mm - 130mm (Length). Includes Ivek Rotary positive displacement pump with dual nozzles for tandem pouches. Max volume per pouch: 30cc, Max film reel diameter: 450mm. Omron CQM1H-CPU51 PLC, Enflex/Fuji Electric HMI, Keyence MS-H150 drive. Includes Markem smart date coder. Registration. Seal bars: 1st (bottom)- 5-3/8" long, 2nd (side)- 5-1/2", 3rd (top)- 5-3/8", 4th (cutting) 3-1/4". Last used in pharmaceutical ointment application.

Used Enflex Model F14 Small Footprint Horizontal Form Fill Seal (HFFS) Pouch Machine with Towelette Feeder

Used- Enflex Model F14 Small Footprint Horizontal Form Fill Seal Pouch Machine with Towelette Feeder. Capable of speeds up to 80 indexes per minute (depending on application).Has a pouch size range: ange: 50mm-140mm x 70mm - 200mm. Equipped with towellet feeder Last used in pharmaceutical operation. CE Certified. 3/60/220V.

Used E-Pak 16 Head Automatic Inline Liquid Filler Microprocessor Controlled

Used ELF E-Pak 16 Head Inline Gravity Pressure Liquid Filler. Has KAPPS-ALL filler heads. Fully automatic, Microprocessor-controlled, Straight-line filler. Approximate OAD 60"x 50"x 80".

MFR: E-Pak Machinery

Eriez EZ-DSP Conveyor Metal Detector 18" x 26" Stainless Frame

Used Eriez EZ-DSP Metal Detector, Model EZ-DSP 18X26 HI. Overall aperture size 18" tall x 26" wide, height with conveyor 16" tall. Conveyor 23-1/2" wide x 83" long, driven by 1hp, 3/60/208-230/460 volt, 1725 rpm gear motor. EZ Tech digital control with touch screen interface. Mounted on a stainless steel frame. Serial# 221150-3. 1/60/100-240 Volt.

MFR: Eriez

Used Excel BPX C-250 H Horizontal Flow Wrapper | High-Speed Automatic Packaging Machine

Used- Excel (BPX) Automatic Horizontal Flow Wrapper, Model C-250 H. Is rated for speeds up to 100 packages per minute (depending on product size and changeparts). Has a seal jaw width of 7.3" for a max film width of 9.8". Can handle products from 2.5" to 7.25" (length) X 1.25" to 4.25" (width) X up to 1.5" (height). Mounted on casters. Color touchscreen operator HMI. Includes manual. 1/60/220V.

MFR: Excel

Used FANUC ARC Mate 120iC Robotic Arc Welding System with Lincoln Electric Power Wave i400

Used FANUC ARC Mate 120iC Robotic Arc Welding System with Lincoln Electric Power Wave i400. High-speed arc welding and cutting robot. Six-axis movement capabilities. Maximum reach of 1,811 mm. 20 kg maximum load at wrist. Repeatability within 0.03mm. Paired with a Fanuc R-30iA controller, and a Lincoln Electric Power Wave i400, robotic-grade electric welding power source. Includes teach pendant. Built 2010.

MFR: Fanuc

Used Fanuc R-2000iC/210F Heavy Payload 6-Axis Industrial Robot with R-30iB Controller & Welding Gun

Used Fanuc R-2000iC/210F Heavy Payload 6-Axis Industrial Robot with R-30iB Controller & Welding Gun. 6-axis movement. Maximum capacity at wrist 210 kg. Maximum reach 2,655 mm. Repeatability within 0.05 mm. Paired with a Fanuc R-30iB controller, and has Leoni Hose assembly. Robot is equipped with a welding gun. Robot serial #R18303868, built 2018.

MFR: Fanuc

Used Fanuc M-900iA/350 6-Axis Robot – 770 lb Payload, R-30iA Controller

Used- Fanuc M-900iA/350 w/ R-30iA Control System and Learning Pendant. Uses Handling Tool Ver 7.3 software. Capable of up to 770 lbs payload with a horizontal reach of up to 104.3in. Up to 6-axes of motion. 3/60/480V.

MFR: Fanuc