Plastics Equipment

Cousins Titan 4100-35-FA Industrial Stretch Wrapper – Heavy-Duty Packaging Equipment

Used- Cousins Packaging Inc. Model Titan 4100-35-FA Automatic Stretch Wrapper. Rated up to 35 loads/hour; 50" L x 50" W x 86" H max. load size; 24" W x 24" L x 24" H min. load size; Double flange bearing support system; Twin V-belt drive pulleys with belt tensioner; Super Rapid Thread 20" capacity pre-stretch film carriage; Special film threading device; 33-313% fixed stretch capability; 1-12 RPM rotational speed c/w soft start acceleration; 1/2 HP DC variable speed motor; Panasonic PLC. 1/60/115V.

MFR: Cousins

High-Speed Pallet Stretch Wrapping Machine – Cousins Titan 4100-35-FA

Used- Industrial Cousins Automatic Stretch Wrapper, Model Titan 4100-35-FA. Rated up to 35 loads/hour; 50" L x 50" W x 86" H max. load size; 24" W x 24" L x 24" H min. load size; Double flange bearing support system; Twin V-belt drive pulleys with belt tensioner; Super Rapid Thread 20" capacity pre-stretch film carriage; Special film threading device; 33-313% fixed stretch capability; 1-12 RPM rotational speed c/w soft start acceleration; 1/2 HP DC variable speed motor; Panasonic PLC. 1/60/115V.

MFR: Cousins

Used Automatic Stretch Wrapping Machine – Cousins Titan 4100-35-FA for Sale

Used- Cousins Packaging Model Titan 4100-35-FA Warehouse Automatic Stretch Wrapper. Rated up to 35 loads/hour; 50" L x 50" W x 86" H max. load size; 24" W x 24" L x 24" H min. load size; Double flange bearing support system; Twin V-belt drive pulleys with belt tensioner; Super Rapid Thread 20" capacity pre-stretch film carriage; Special film threading device; 33-313% fixed stretch capability; 1-12 RPM rotational speed c/w soft start acceleration; 1/2 HP DC variable speed motor; Panasonic PLC. 1/60/115V.

MFR: Cousins

Used Cousins Titan 4100-35-FA High-Speed Stretch Wrapper – 1-12 RPM Rotation

Used- Cousins Packaging Inc. Industrial / Warehouse Automatic Stretch Wrapper, Model Titan 4100-35-FA. Rated up to 35 loads/hour; 50" L x 50" W x 86" H max. load size; 24" W x 24" L x 24" H min. load size; Double flange bearing support system; Twin V-belt drive pulleys with belt tensioner; Super Rapid Thread 20" capacity pre-stretch film carriage; Special film threading device; 33-313% fixed stretch capability; 1-12 RPM rotational speed c/w soft start acceleration; 1/2 HP DC variable speed motor; Panasonic PLC. 1/60/115V.

MFR: Cousins

Buy Used Cryovac Model 2002A Liquid Pouch Machine – Sauces, Soups, Ready Meals

Used Cryovac/Sealed Air Model 2002A Onpac Vertical Form Fill Seal. Speeds up to 36 ppm. Max pouch size up to 2 gallons. Sanitary stainless steel construction. Capable of packaging cold liquids as well as hot products up to 210F. Uses co-extrusion and laminated films available from Cryovac in 6", 7.5", 9.25" and 11.5" widths. 230 vac 3 ph electric power and air required. Designed for packaging pumpable foods / liquids such as sauces, soups, ready-meals, processed fruits and vegetables, oils, condiments, liquid eggs, dairy products, etc.

MFR: Cryovac

CTM Model 3600-PA Label Printer Applicator – Pressure-Sensitive Labeler, Tamp-Blow

Used CTM Model 3600-PA Printer Applicator with Portable Stand and Parts Unit; high-speed labeler used to thermally print and apply pressure sensitive labels to moving products; Short height actuator assembly; 4" tall labels can be located 1/4" from the bottom of products; Right hand or left hand version for either side of conveyor; Up to 7.1" wide labels, up to 6.6" print width; Built-in bar codes and alpha-numeric fonts; Proven tamp-blow application; PLC control; 108-132 Volts AC, 5 Amps,54/60 Hertz, Single Phase; Pneumatic 90 PSI., 3-5 CFM; Approximately 150 lbs. Last used in a cheese manufacturing application.

Used CVC Technologies CVC1101 Cleated Belt Conveyor – 85” Discharge Height

Used- CVC Technologies Cleated Belt Conveyor, Model CVC1101. Approximate 4-1/2" wide cleated plastic belt. Belt is set on 2-3/4" center line, cleat 4-1/2" wide x 1-1/8" tall. Hopper with cover. Approximate 85-1/4" discharge height. Mounted on stainless frame with casters. 1/50/60/220 volt, 200W. Serial# 098Z1422.

MFR: CVC

Industrial Flow Meter - Micro Motion D100S-SS, 48 GPM, 400 lb/min

Used- Micro Motion Flow Meter, Model D100S-SS. 316 Stainless Steel Product Contact Areas. Rated volume 0 to 48 gallons per minute, mass 0 to 400 pounds per minute. 1" inlet/outlet, temp range: -40 degrees C to 60 degrees C. Tube pressure 2250 max.

MFR: Micro Motion

Used Delkor TFS Automatic Hot-Melt Glue Tray Former

Used Delkor Automatic Hot Melt Glue Tray Former, Model TFS. Machine is rated for speeds up to 80 trays per minute (depending on product and package sizes). Has a layflat tray size range of: 5" to 25" (length), 3" to 20.25" (width). Has a formed tray size range of: 3" to 14.25" (length), 3" to 20.25" (width), 1" to 7" (height). Has suction cup pick-n-place tray infeed. Includes (2) Nordson problue 7 hotmelt glue system and hoses. Is of stainless steel construction. Has Allen Bradley PLC, A/B PanelView Plus 700 HMI, A/B Kinetix 6000 servo drives. Becker VX4.10 vacuum pump. 5 SCFM @ 80 PSIG. 3/60/480V. Serial# SP-2652. Dimensions 134" x 68" x 127" tall.

MFR: Delkor

Used Delkor TFS4 Automatic Tray Former – High-Speed Glue Case & Carton Forming System

Used Delkor TFS4 Automatic Tray Former High-Speed Glue Case & Carton Forming System. Single Head Former. Stainless Steel Construction. Capable of Cartons, Trays and Cases. OEM Speeds up to 45 cycles per minute. OEM Blank Size Range: (length) 5" to 37"; (width) 7.25" to 50". Nordson ProBlue 7 Hot Melt System. Allen Bradley Controls, Allen Bradley Panelview Plus 700. 3/60/408V.

MFR: Delkor

Delkor TFS4 High-Speed Automatic Tray & Case Former – Stainless Steel Carton Forming System

Delkor TFS4 High-Speed Automatic Tray & Case Former Stainless Steel Carton Forming System. Single Head Former. Stainless Steel Construction. Capable of Cartons, Trays and Cases. OEM Speeds up to 45 cycles per minute. OEM Blank Size Range: (length) 5" to 37"; (width) 7.25" to 50". Nordson ProBlue 7 Hot Melt System. Allen Bradley Controls, Allen Bradley Panelview Plus 700. 3/60/408V.

MFR: Delkor

Used Delkor 752 Dual Head Top Load Carton/Tray Former – 120 TPM

Used- Delkor Model 752 Dual Head Hot Melt Glue Top Load Carton/Tray Former. Capable of speeds up to 120 Trays per minute or 60 cycles per minute each head (depending on application). Container size range: flat blank sizes up to 22" L x 30: W. Equipped with dual 24" long blank tray magazines, dual vacuum suction cup recipicating pick-in-places, Nordson Problue hot melt glue system and lexan safety guarding. S/N 979, Allen Bradley PLC controls with Allen Bradley Panelview HMI.

MFR: Delkor