Petro Chemical Equipment

Used Adco 15E60EC Semi-Automatic Glue Cartoner – 120 CPM

Used- Adco Model 15E60EC Wide Frame Semi Automatic Horizontal Glue Cartoner. Capable of speeds from 20 - 120 cartons per minute (depending on application). Has 7.5" centers for carton size range: 1" to 6" (length) x 3/4" to 4" (width) x 5" to 12" (depth). Has (3) head rotary carton feed. 6' long manual load area. Nordson Problue hot melt glue system. 3/60/230V, 40 amp. Machine can be set to size with F.A.T at our showroom. Ask your AEK sales representative for details.

MFR: Adco

Used Adco Model 6V Vertical Hot Melt Cartoner – Hand Load, 125 CPM

Used- Adco Model 6V vertical Hand Load Hot Melt Cartoner. Capable of speeds up to 125 CPM (depending on carton configuration and application). Has 6" centers (convertible to 12" on every other carton) with a carton size range: (Length) 2" - 9.5" or 50mm - 240mm x (Width) .75" - 3" or 20mm - 75mm x (Depth) 4" - 10" or 100mm - 255mm. Has rotary carton placer, Nordson 3100V hot melt glue system, embosse date coder and currently tooled up for a 2-7/8" x 1-7/8" x 5-1/2" carton. Has 36" of load area on either side. Last used in pharmaceutical packaging operation. Send in samples for quoting to set up cartoner for your application. (upgrade to a Nordson Problue for additional $7,500.00). 3/60/208 Volt, 27 Amps.

MFR: Adco

Pre-Owned Adco Triseal Carton Former for Sale – Three Head Former

Used- Adco Triseal Carton Former, Model AFHXX-40-3-WD. Three head former for tab-lock style hooded trays. All Stainless Steel construction Washdown Nema 4X. Top load carton / hooded tray size range: Length 3" to 17"; Width 3" to 8"; Depth 0.75" to 4" subject to tooling configuration. Now tooled for 3 trays: 6-7/8" x 6-1/4" x 2-1/4". Additional tooling is available, contact AEK for more information. Equipped with vacuum generator blank pick and place. Controls are Allen-Bradley CompactLogix L32E PLC, a AB PanelView 600 HMI. 230V.-3PH.-60Hz.-20 AMPS. Comp air 90 psi, cfm. Serial # 5871SL. Mfg. 02-26-09. See AEK # 72054002 for matching Adco Tri Seal Carton Closer.

MFR: Adco

Buy Pre-Owned Adco Horizontal Cartoner 15D105-EC with Glue Closure System

Used- Adco Horizontal Manual Load Cartoner, Model 15D105-EC. Approximate 125 cartons/min speed range with adjustable centers. Carton size range 1 to 9-1/2" length x 3/4" to 3" wide x 5" to 12" depth. 12" Centers. 9-5/8" Wide conveyor. Has 6' manual load area. 36" Inclined gravity fed carton hopper. Glue closure with Nordson MicroSet Hot Melt Glue unit. 3/60/230 Volt, 25 Amp.

MFR: Adco

Used Adco 15D-105-WD Washdown Semi-Automatic Cartoner – 125 CPM, Stainless Steel

Used- Adco Model 15D-105-WD Wash Down Semi Automatic Horizontal Hand Load Cartoner. Capable of speeds up to 125 Cartons Per Minute (depending on application). Has a carton size range: (length) 1" to 9" (width) 1" to 4" (depth) 4" to 12". Stainless Steel Washdown Construction, Two head rotary carton feed, 4 chain carton transport with 12" centers. Nodson Problue 4 Hot Melt Glue System. Has a 6'L Product Load Area, Becker Vacuum pump, 3 phase, 60Hz, 460volt, 18Amp. Overall Dimensions 250"L x 48"W x 75"

MFR: Adco

Used Adco 15 D Horizontal Load Semi-Automatic Cartoner

Used Adco Horizontal Load Semi-Automatic Cartoner, Model 15 D. Cartoner is set up for hot melt glue style closure. Is rated for speeds up to 120 cartons per minute. Has approximately 15" centers for a carton size range of: 1" - 9-1/2" width of : 3/4" to 4", depth of: 4" to 12." Has a dual head rotary carton pick n place option with carton magazine infeed. Includes adjustable lugged cartoner feed chain. Allen Bradley Controls. 3/60/480V.

MFR: Adco

Used R.A Jones (Aerofill) Model 1695 Ultraflex Rotary 18-Head TTV Gasser Shaker

Used- R.A Jones (Aerofill) Model 1695 Ultraflex Rotary 18 Head TTV "Gasser Shaker". Capable of speeds up to 275 cans per minute (depending on application). Container size range: 1-3/8" - 3" or 35mm - 76.2mm (diam) x 5" - 10" (height) including spray tip stem. Includes Allen Bradley CompactLogix L24ER PLC, A/B panelview plus 700 HMI. Conveyor 3-1/2" wide x 107" long. 5HP 3/60/230/460V. Has a 10HP Hydraulic power pack. 3/60/480V. Multi head gasser shaker for high speed product absorption within aerosol containers, using either carbon dioxide (CO2) or nitrous oxide (N2O). This may be accomplished via pressurized gas or via equilibrium. The absorption of the gas into the product is enhanced by mechanically agitating the container during the filling process. Currently set up for 2-1/8" internal diameter x 5-1/4" tall and was last used in a dairy beverage operation. Elec: 3/60/480V.

MFR: Aerofil

Used R.A Jones Aerofill 1695 Ultraflex | High-Speed Rotary Gasser Shaker

Used- R.A Jones (Aerofill) Model 1695 Ultraflex "Gasser Shaker" Rotary 18 Head TTV. Capable of speeds up to 275 cans per minute (depending on application). Container size range: 1-3/8" - 3" or 35mm - 76.2mm (diam) x 5" - 10" (height) including spray tip stem. Includes Allen Bradley CompactLogix L24ER PLC, A/B panelview plus 700 HMI. Conveyor 3-1/2" wide x 107" long. 5HP 3/60/230/460V. Has a 10HP Hydraulic power pack. 3/60/480V. Multi head gasser shaker for high speed product absorption within aerosol containers, using either carbon dioxide (CO2) or nitrous oxide (N2O). This may be accomplished via pressurized gas or via equilibrium. The absorption of the gas into the product is enhanced by mechanically agitating the container during the filling process. Currently set up for 2-1/8" internal diameter x 5-1/4" tall and was last used in a dairy beverage operation.

MFR: Aerofil

R.A Jones (Aerofill) Model 1695 | 18-Head Rotary TTV Gasser Shaker

Used- (Aerofill) R.A Jones Model 1695 Ultraflex Rotary 18 Head TTV "Gasser Shaker". Capable of speeds up to 275 cans per minute (depending on application). Container size range: 1-3/8" - 3" or 35mm - 76.2mm (diam) x 5" - 10" (height) including spray tip stem. Includes Allen Bradley CompactLogix L24ER PLC, A/B panelview plus 700 HMI. Conveyor 3-1/2" wide x 107" long. 5HP 3/60/230/460V. Has a 10HP Hydraulic power pack. 3/60/480V. Multi head gasser shaker for high speed product absorption within aerosol containers, using either carbon dioxide (CO2) or nitrous oxide (N2O). This may be accomplished via pressurized gas or via equilibrium. The absorption of the gas into the product is enhanced by mechanically agitating the container during the filling process. Currently set up for 2-1/8" internal diameter x 5-1/4" tall and was last used in a dairy beverage operation.

MFR: Aerofil

Buy Unused Aesus Premier Shrink Sleeve Applicator — 150 CPM Capability

Unused- Aesus Continuous Motion Full Body Shrink Labeler, Model Premier Shrink. Capable of up to 150 CPM. Size range from 1-1/8" diameter up to 4.9" (198mm) diameter. Maximum lay flat 200mm. 5" Inside diameter sleeve roll core. 16" Outside diameter sleeve reel holder. Conveyor belt 4" wide. Allen Bradley Micrologix 1400 PLC, A/B panelview plus 7 HMI, Panasonic servo drive. End of film sensor, photo registration. Dual rotating sleeve applicator. Includes Aseus Deltaveyor 4" wide x 22' long, serial# 881760623. 3/60/208-240 Volt, 13 Amp. Serial# 889970523.

MFR: Aesus

Used Aesus Delta Chuckcap Automatic Single Chuck Capper – 60 CPM

Used- Aesus Model Delta Chuckcap Automatic Single Chuck Capper. Capable of speeds up to 60 containers per minute. Has intermittent motion carton indexing with two station tightener (1 pre-spin station, 1 final torqueing station). Cap size range: 0" to 5" diameter x 0" to 1" thick (with changeparts). Bottle size range: 0" to 10" diameter x 0" to 12" tall. Allen Bradley Mircologix 1400 PLC, A/B Panelview Plus 600 HMI, Panasonic servo drives. Pneumatic height adjustment. Includes cap sorting elevator (oversized), for flat caps up to 5" diameter. Last used in nutritional supplement packaging operation. 1/60/208 Volt.

MFR: Aesus

Used AFM TS-CH100-V1B Stainless Steel Tamper Evident Neckbander – Up to 120 Containers Per Minute

Used AFM TS-CH100-V1B Stainless Steel Tamper Evident Neckbander Up to 120 Containers Per Minute. Bander is rated for speeds from 20-120 containers per minute (depending on application). Has film requirements of: 5mm to .07mm (thickness) with a layflat of 40mm-150mm and a cut length of 20mm-50mm. Has stepper motor controls and butterfly mandrel. Set up for unregistered clear film. Built 2016. 1/60/220V.