Petro Chemical Equipment

Used – Perry Products Shell & Tube Heat Exchanger – 984 sq. ft., Carbon Steel Shell & 316L SS Tubes

Used- Perry Products Shell and Tube Heat Exchanger. 984 sq foot. Carbon steel shell. 316L stainless steel tubes. 316L stainless steel heads. 90 psi @ 300 degrees F shell. 90 psi @ 300 degrees F tubes. 1" tube diameter. 16'0" tube length. 235 tube holes; 18 bwg tube wall. NB code. (2) 3" shell nozzles; 3" and 6" tube nozzles; 1'10" shell diameter. Built 1999.

MFR: Perry Products

Used Titanium Ltd. Titanium Shell and Tube Heat Exchanger, approx. 986 square foot

Used- Titanium Ltd. Titanium Shell and Tube Heat Exchanger, approx. 986 square foot. 30" diameter X 16 T.L.; Carbon steel shell rated 20/FV @ 300 degrees F; (157) 1.5" titanium tubes rated FV @ 230 degrees F.; NB# 182, S/N 12792. Unit designed as reboiler heat exchanger. Built 1995.

MFR: Titanium Fabricators

Used – Steel Fab Horizontal Carbon Steel Pressure Tank – 40" x 96", 150 PSI, 2008

Used Steel Fab Horizontal Carbon Steel Pressure Tank 40" x 96", 150 PSI, 2008. Approximately 40" diameter x 96" straight side. Dished heads. Rated 150psi at -20 to 400 Degrees F. 16" diameter manway with cover, (2) 2" top connections. Head thickness .211, shell thickness .250. Part# 134-474SE. National Board# 520261, Serial# CRN.H9097.5C.

Alfa Laval UVNX-945B-11G Solid Bowl Tricanter Centrifuge. used.

Used- Alfa Laval UVNX-945B-11G Solid Bowl Tricanter Centrifuge. 316 Stainless steel construction (product contact areas). Maximum bowl speed 2900 rpm. Single row of lined cake discharge ports, single lead conveyor, base, casing, gearbox, feed pipe.45 kw, 400-690/3/50-60 main drive motor & gearbox. Back drive system. Mounted on a stand with 4 legs. Control panel. Previous used in an olive oil application .Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Alfa Laval

Used APV Crepaco Multi-Stage Plate Heat Exchanger | 275 Plates | 72" Bundle | Stainless Sanitary

Used APV Crepaco Multi-Stage Plate Heat Exchanger | 275 Plates | 72" Bundle | Stainless Sanitary. Equipment R/5IT W.O # 33443. Plate Bundle is 72" long. Has (275) 61" X 17" plates. (8) Process and service inlets/outlets are 3.75" sanitary style. Has (6) 2.5" sanitary style side and bottom inlets/outlets. Stand and clamping screws are all stainless steel construction. OAD: 14'6" L x 3'6" W x 9' H.

MFR: APV/Crepaco

Used APV Spray Dryer 3PSBD 58 – 316 Stainless Steel, 35-120 kg/h Capacity

Used- APV Spray Dryer, Model 3PSBD 58, 316 Stainless Steel. Installed unit including heating elements, filter, controls. Drying chamber size 58, approximate volume 21.73 m3. Production rate: Due to test more kinds of nozzles and different conditions, we oscillated in powder production rate form 35 to 120kg/h. Inlet temperature main drying air: 0-600 degrees C ( We often used max. inlet temp. 420 C). Maximum outlet temperature 140 degrees C. Includes Herding dust collector, cyclone and blower. Dimension 4200 x 2250 x 2300mm (LxWxH). Gross weight: 1880kg, Net weight: 1580kg. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: APV

Complete tank farm

Used- Complete tank farm consisting of: (8) G&G International 1,800m3 Storage Vessels 26' (8000 mm) dia. x 99'1" (30500 mm) long with (4) Weir Gabbioneta Pumps. Installed horizontally on a sand bed and earth enclosed. Including piping, valves and additional infrastructure. Further details and technical documentation are available upon request. Located in Europe. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

Unused Alfa Laval Aldec 45 Solid Bowl Decanter Centrifuge – 316 Stainless Steel, 4,200 RPM, 55 kW Drive

Unused Alfa Laval Aldec 45 Solid Bowl Decanter Centrifuge 316 Stainless Steel, 4,200 RPM, 55 kW Drive. AISI 316 Stainless Steel construction (product contact areas). Maximum bowl speed 4200 RPM. 360 deg single row of lined cake discharge ports with Tungsten Carbide wear liners, liquid plate dams, base, stainless steel casing, approx. 55 kW (82.5 HP), 3/50/400-Volt main drive motor. 2.5 KN gearbox with back drive. Frame mounted on (4) legs. Control panel. Serial # 5250277. New 2021. Unused never used in production.

MFR: Alfa Laval

Unused Alfa Laval Aldec 45 Solid Bowl Decanter Centrifuge – AISI 316 Stainless Steel, 4,200 RPM, 55 kW Drive

Unused Alfa Laval Aldec 45 Solid Bowl Decanter Centrifuge AISI 316 Stainless Steel, 4,200 RPM, 55 kW Drive. AISI 316 Stainless Steel construction (product contact areas). Maximum bowl speed 4200 RPM. 360 deg single row of lined cake discharge ports with Tungsten Carbide wear liners, liquid plate dams, base, stainless steel casing, approx. 55 kW (82.5 HP), 3/50/400-Volt main drive motor. 2.5 KN gearbox with back drive. Frame mounted on (4) legs. Control panel. Serial # 5250278. New 2021. Unused never used in production!

MFR: Alfa Laval

Used Lodige FM 300D Plow Mixer – 300L, Stainless, 9.5 HP Motor, Frame Mounted

Used- Lodige Plow Mixer, Model FM 300D. Stainless steel construction; 300 liter volume (approximate 79 gallons); 620mm diameter x 980mm straight side (approximate 24" x 39") trough size; 330mm 520mm (13" x 20") inspection hatch; 250mm (10") outlet diameter. Mounted on Frame. 7 kW (approximate 9.5 HP) motor. Built 1971. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Lodige

Used Lodige FM 130D Plow Mixer – 130L, Stainless, 4 HP, Frame Mounted

Used- Lodige Plow Mixer, Model FM 130D. Stainless steel construction; 130 liter (approximate 34 gallon) volume; 480 mm diameter x 670mm straight side (19" x 26") trough size; 300mm 520 mm (12" x 20") hatch size; 250mm (10") diameter outlet; Mounted on frame. 3 kW (4HP), 720 RPM, 220/440V motor. Built 1971. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Lodige

Used Labtex ESTDi Spray Dryer | 3000W Heater | Stainless Atomizer | Built 2018

Used Labtex ESTDi Spray Dryer | 3000W Heater | Stainless Atomizer | Built 2018. Components include: Main drying chamber; Stainless steel atomizer .5mm jet nozzle assembly; Inlet air filter; Peristaltic pump; Blower; Heater; Compressor: U-bend; Conveying tube; Cyclone; Control panel; Additional ancillary equipment/parts. 3000 W max. heater power; 19.8 Ft/s max. blower speed; .515 gal/hr max. pump speed; 41-90 degrees F min/max. ambient temperature; Ambient to 392 degrees F temperature range.1/50-60/220-240V. Built 2018. Previously used for SiO/TiO2.