Petro Chemical Equipment
Stock No.:
50619002Used Alfa Laval / Sharples Super-D-Canter DS-706 Centrifuge – 300 HP, 317 Stainless Steel
Used- Alfa Laval / Sharples Super-D-Canter DS-706 Centrifuge, 317 Stainless steel construction on product contact areas, maximum bowl speed 2600 rpm, 10" single lead conveyor with STC wear protection tiles, casing with stainless top cover, gearbox (95:1 ratio), air cooled lube system, 300 hp drive motor and sub-base with VFD, 3/60/460 volt, 1780 rpm, safety guards, feed pipe, backdrive stand and 75 hp motor, operations and control panels.
MFR: Alfa Laval
Stock No.:
70852Industrial Stainless Steel Plow Mixer/Dryer – Used Hagen & Rinau HSM 800
Used- Hagen & Rinau Unimix Plow Mixer/Dryer, Type HSM 800. Material of construction is 304 stainless steel (1.4541). 34" (900 mm) diameter x 51" (1300 mm) straight side mixing/drying chamber. Total capacity is 29 cubic feet (822 liter), net working capacity is 8.83-20.3 cubic feet (250-575 liter). Jacketed, inside rated for 45 psi (3 bar) at 212 deg F (100 deg C). 2 end scrapers and 4 Becker plows welded on a shaft. One (1) removable end. (1) 9.75" x 23.4" (250 mm x 600 mm) outlet. Driven via a gearbox by a 195 hp/130 kw, 1280 rpm, 400 volt/50 cycle/3 ph motor. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Hagen & Rinau-Unimix
Stock No.:
10749158Used Fabsco 299 Sq Ft Shell & Tube Heat Exchanger, Carbon Steel, 405 PSI, 2023
Used Fabsco 299 sq. ft. Shell and Tube Heat Exchanger. Carbon steel tubes rated 405 psi at 32 to 330 degrees F. 13' Tube length. Carbon steel head. Carbon steel shell rated 405 psi at 5 to 300 degrees F. 15'' Shell diameter. National Board # 11283, Serial # S21-13258-10, built 2023.
MFR: Fabsco
Stock No.:
10749159Fabsco Shell and Tube Heat Exchanger, 299 Square Foot
Used Fabsco Shell and Tube Heat Exchanger, 299 Square Foot. Carbon steel tubes rated 405 psi at 32 to 330 degrees F. 13' Tube length. Carbon steel head. Carbon steel shell rated 405 psi at 5 to 300 degrees F. 15'' Shell diameter. National Board # 11282, Serial # S21-13258-9, built 2023.
MFR: Fabsco
Stock No.:
10211226Used Fitzpatrick Fitzmill Model D Comminuting Machine – 3 HP, Stainless Contact, Gravity Fed
Used- Fitzpatrick Fitzmill Comminuting Machine, Model D. Stainless steel material in contact with product. 3HP. Unit is gravity fed with slanted inlet throat with an opening of 4.75"H X 5.75"W. 6" wide milling chamber with a 10" diameter rotor. Mill Rotor: 16 pivoting blades, plain bars 1" wide X 0.25" thick. Bottom discharge hopper with 7.75" flange, 42.25" above base elevation. Portable carbon steel stand with a base area of 42" X 46". 3HP two-speed v-belt drive, 1750 RPM TEFC motor. Supply power: 115/230V, 60Hz, single phase AC. Bottom sizing screens not included.
MFR: Fitzpatrick
Stock No.:
50510001Used Scott Turbon 1XEV-1 Mixer & Lee Industries 1-Gallon Reactor – 3 HP, Stainless Steel
Used- Scott Turbon Mixer, Model 1XEV-1, Stainless Steel. Approximate 9-3/4" long mixing shaft. Driven by a 3 hp, 3/60/230/460 volt, 3500 rpm motor. Air operated raise. Includes Lee Industries Reactor, Approximate 1 Gallon (4 Liters), Model 4LDBT. Internal 316L Stainless steel rated 45 psi at -20 to 325 degrees F, vacuum designed. 304 Stainless steel jacket rated 50 psi at -20 to 325 degrees F. Dished top head with 3" tri-clamp openings (missing clamp), (5) 3/4", (5) Bolts missing off top head. Vessel openings side: 1-1/2", 3/4", bottom: 1-1/2" with valve. Reactor Serial # C5087C. Built 1997. Includes control panel with A/B controller. Mounted on stainless steel frame with casters. Serial # 4060-1A.
MFR: Scott Turbon
Stock No.:
48417002Used Sturtevant Sample Grinder – Model 2-10, 100-400 lbs/hr Capacity, Carbon Steel
Used- Sturtevant Sample Grinder, Model 2-10, Carbon Steel. Approximate capacity 100 to 400 pounds per hour, product size 20 to 100 mesh. (1) 10" diameter grinding disc, driven by a 3 hp, 3/60/208-230/460 volt, 1750 rpm motor. Hinged door with (1) 10" diameter stationary grinding disc. Approximate top inlet 6-1/4" x 2-1/4", bottom outlet 6-3/4" x 4-3/8". Mounted on a carbon steel frame. Serial #1170.
MFR: Sturtevant
Stock No.:
54425002Used Charles Ross HSD-3 High Speed Disperser 3 Gallon Lab Mixer
Used Charles Ross & Son High Speed Disperser, Model HSD-3. Designed for laboratory and pilot-scale mixing and dispersion. Approximate 3-gallon working capacity, vertical shaft batch type, handling viscosities up to approximately 50,000 cP. 5-1/4" Diameter disperser blade. Driven by approximately 3 HP inverter-duty TEFC motor, 230/460V, 3 phase, 50/60 Hz, with variable speed drive. Wetted parts are 304 stainless steel with painted carbon steel frame and V-belt drive. Features air/oil hydraulic lift with adjustable head. Bench or floor mounted, open vessel design. Suitable for paints, coatings, inks, adhesives, and chemical applications.
MFR: Ross Industries
Stock No.:
54228003Used Patterson Kelley 3 Cu. Ft. Twin Shell Dry V-Blender – Stainless Steel
Used Patterson Kelley 3 Cubic Foot Twin Shell Dry V-Blender, Stainless Steel. 3 cubic foot capacity. Max material density 70 lbs./cubic foot. Top charge ports with covers. 16" diameter x 26" long vessel sections. 6" Diameter center bottom outlet with 41" discharge height. Driven by a 3/4hp, 3phase 50/60 hz, 208-220/440 volt, 1725/1425rpm motor. Mounted on painted carbon steel frame. Serial# 147566.
MFR: Patterson Kelley
Stock No.:
50467039Buy Used Ketema Shell & Tube Heat Exchanger – 3.2 Sq. Ft., High-Pressure Rated
Used- Ketema Shell & Tube Heat Exchanger, 3.2 Square Feet, Type MVHT-1-A-SS. (28) .375" diameter x 14" long 316 stainless steel tubes rated 300 psi and full vacuum at 650 degrees F. Carbon steel shell rated 150 psi at 400 degrees F. Size 4-Y-14. 1.5" tubes inlet/outlets, 1" shell inlet/outlets. Serial # WL-950429/2.
MFR: Ketema
Stock No.:
50467040Used Ketema MVHT-1-A-SS Shell & Tube Heat Exchanger – 3.2 Sq. Ft., 300 PSI
Used- Ketema Type MVHT-1-A-SS Shell & Tube Heat Exchanger, 3.2 Square Feet. (28) .375" Diameter x 14" long 316 stainless steel tubes rated 300 psi and full vacuum at 650 degrees F. carbon steel shell rated 150 psi at 400 degrees F, Size 4-Y-14. 1.5" tubes inlet/outlets, 1" shell inlet/outlets. Serial # WL-950429/A1,
MFR: Ketema
Stock No.:
44604001Used J.H. Day Plow Type Turbulent Mixer – 304 Stainless Steel, 3.5 Cu. Ft. | High-Performance Industrial Mixer with Side-Entering Pinned Disc Mill
Used- J.H. Day Plow Type Turbulent Mixer, 304 Stainless Steel. 3.5 Cubic feet total capacity. Non-jacketed chamber approximately 20" diameter x 22" straight side. 3" Diameter shaft with blades and end scrapers. Driven by a 7.5 hp, 3/60/230/460 volt, 1800 rpm Sterling variable Speed-trol motor. Includes a side entering pinned disc mill, driven by a 10 hp, 3/60/230/460 volt, 3490 rpm motor. Top access door with a charge port, 8" center bottom outlet with a manually operated plug valve. Includes a control panel. Mounted on a carbon steel frame.
MFR: J H Day