Packaging Equipment
Stock No.:
70852Industrial Stainless Steel Plow Mixer/Dryer – Used Hagen & Rinau HSM 800
Used- Hagen & Rinau Unimix Plow Mixer/Dryer, Type HSM 800. Material of construction is 304 stainless steel (1.4541). 34" (900 mm) diameter x 51" (1300 mm) straight side mixing/drying chamber. Total capacity is 29 cubic feet (822 liter), net working capacity is 8.83-20.3 cubic feet (250-575 liter). Jacketed, inside rated for 45 psi (3 bar) at 212 deg F (100 deg C). 2 end scrapers and 4 Becker plows welded on a shaft. One (1) removable end. (1) 9.75" x 23.4" (250 mm x 600 mm) outlet. Driven via a gearbox by a 195 hp/130 kw, 1280 rpm, 400 volt/50 cycle/3 ph motor. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Hagen & Rinau-Unimix
Stock No.:
10749158Used Fabsco 299 Sq Ft Shell & Tube Heat Exchanger, Carbon Steel, 405 PSI, 2023
Used Fabsco 299 sq. ft. Shell and Tube Heat Exchanger. Carbon steel tubes rated 405 psi at 32 to 330 degrees F. 13' Tube length. Carbon steel head. Carbon steel shell rated 405 psi at 5 to 300 degrees F. 15'' Shell diameter. National Board # 11283, Serial # S21-13258-10, built 2023.
MFR: Fabsco
Stock No.:
10749159Fabsco Shell and Tube Heat Exchanger, 299 Square Foot
Used Fabsco Shell and Tube Heat Exchanger, 299 Square Foot. Carbon steel tubes rated 405 psi at 32 to 330 degrees F. 13' Tube length. Carbon steel head. Carbon steel shell rated 405 psi at 5 to 300 degrees F. 15'' Shell diameter. National Board # 11282, Serial # S21-13258-9, built 2023.
MFR: Fabsco
Stock No.:
10211226Used Fitzpatrick Fitzmill Model D Comminuting Machine – 3 HP, Stainless Contact, Gravity Fed
Used- Fitzpatrick Fitzmill Comminuting Machine, Model D. Stainless steel material in contact with product. 3HP. Unit is gravity fed with slanted inlet throat with an opening of 4.75"H X 5.75"W. 6" wide milling chamber with a 10" diameter rotor. Mill Rotor: 16 pivoting blades, plain bars 1" wide X 0.25" thick. Bottom discharge hopper with 7.75" flange, 42.25" above base elevation. Portable carbon steel stand with a base area of 42" X 46". 3HP two-speed v-belt drive, 1750 RPM TEFC motor. Supply power: 115/230V, 60Hz, single phase AC. Bottom sizing screens not included.
MFR: Fitzpatrick
Stock No.:
50510001Used Scott Turbon 1XEV-1 Mixer & Lee Industries 1-Gallon Reactor – 3 HP, Stainless Steel
Used- Scott Turbon Mixer, Model 1XEV-1, Stainless Steel. Approximate 9-3/4" long mixing shaft. Driven by a 3 hp, 3/60/230/460 volt, 3500 rpm motor. Air operated raise. Includes Lee Industries Reactor, Approximate 1 Gallon (4 Liters), Model 4LDBT. Internal 316L Stainless steel rated 45 psi at -20 to 325 degrees F, vacuum designed. 304 Stainless steel jacket rated 50 psi at -20 to 325 degrees F. Dished top head with 3" tri-clamp openings (missing clamp), (5) 3/4", (5) Bolts missing off top head. Vessel openings side: 1-1/2", 3/4", bottom: 1-1/2" with valve. Reactor Serial # C5087C. Built 1997. Includes control panel with A/B controller. Mounted on stainless steel frame with casters. Serial # 4060-1A.
MFR: Scott Turbon
Stock No.:
54228003Used Patterson Kelley 3 Cu. Ft. Twin Shell Dry V-Blender – Stainless Steel
Used Patterson Kelley 3 Cubic Foot Twin Shell Dry V-Blender, Stainless Steel. 3 cubic foot capacity. Max material density 70 lbs./cubic foot. Top charge ports with covers. 16" diameter x 26" long vessel sections. 6" Diameter center bottom outlet with 41" discharge height. Driven by a 3/4hp, 3phase 50/60 hz, 208-220/440 volt, 1725/1425rpm motor. Mounted on painted carbon steel frame. Serial# 147566.
MFR: Patterson Kelley
Stock No.:
54425002Used Charles Ross HSD-3 High Speed Disperser 3 Gallon Lab Mixer
Used Charles Ross & Son High Speed Disperser, Model HSD-3. Designed for laboratory and pilot-scale mixing and dispersion. Approximate 3-gallon working capacity, vertical shaft batch type, handling viscosities up to approximately 50,000 cP. 5-1/4" Diameter disperser blade. Driven by approximately 3 HP inverter-duty TEFC motor, 230/460V, 3 phase, 50/60 Hz, with variable speed drive. Wetted parts are 304 stainless steel with painted carbon steel frame and V-belt drive. Features air/oil hydraulic lift with adjustable head. Bench or floor mounted, open vessel design. Suitable for paints, coatings, inks, adhesives, and chemical applications.
MFR: Ross Industries
Stock No.:
50467039Buy Used Ketema Shell & Tube Heat Exchanger – 3.2 Sq. Ft., High-Pressure Rated
Used- Ketema Shell & Tube Heat Exchanger, 3.2 Square Feet, Type MVHT-1-A-SS. (28) .375" diameter x 14" long 316 stainless steel tubes rated 300 psi and full vacuum at 650 degrees F. Carbon steel shell rated 150 psi at 400 degrees F. Size 4-Y-14. 1.5" tubes inlet/outlets, 1" shell inlet/outlets. Serial # WL-950429/2.
MFR: Ketema
Stock No.:
50467040Used Ketema MVHT-1-A-SS Shell & Tube Heat Exchanger – 3.2 Sq. Ft., 300 PSI
Used- Ketema Type MVHT-1-A-SS Shell & Tube Heat Exchanger, 3.2 Square Feet. (28) .375" Diameter x 14" long 316 stainless steel tubes rated 300 psi and full vacuum at 650 degrees F. carbon steel shell rated 150 psi at 400 degrees F, Size 4-Y-14. 1.5" tubes inlet/outlets, 1" shell inlet/outlets. Serial # WL-950429/A1,
MFR: Ketema
Stock No.:
50388107Used IKA Works Dispax Reactor – High Shear Inline Disperser, Model DR 2000/10, 30 HP
Used- IKA Works Dispax Reactor High Shear Inline Disperser, Model DR 2000/10, Stainless Steel. Nominal flow rate 35 gallons per minute (8,000 l/h), nominal tip speed 4500 feet per minute. Driven by a 30hp, 3/60/230/460 volt, 3525 rpm motor. 2" Inlet & outlet. Unit mounted on a base. Part# P015742. Serial # 2599-12.
MFR: IKA Works
Stock No.:
54115001Used Tolhurst 30” Basket Centrifuge | Top Unload | 0–1000 RPM | Stainless Steel
Used- Tolhurst Basket Centrifuge, Size 30", 0-1000 basket rpm, 70lbs/cu. ft maximum throughput. Stainless steel contact parts. Top Unload, Perforated basket. stainless steel bolt on top with clamp down cover, 6" sight glass. Cover has (2) 2-1/2" threaded inlets. Vessel approximately 30" diameter x 18" straight side. 4" side bottom outlet down to 1-1/4" threaded. 3 point mount on carbon steel frame with casters. Serial# TA-38533. Includes Hydraulic Drive skid, driven by a 7.5hp 3/60/230/460v 1175rpm motor through reducer, and a mounted Control Panel.
MFR: Tolhurst
Stock No.:
10986028Used Trans Food Tech Pre-Mixing System | 300 Gallon Skid-Mounted Mixer
Used Trans Food Tech Pre-Mixing System | 300 Gallon Skid-Mounted Mixer. 41" straight side x 45" diameter tank dimensions, flat bottom. Scrape agitation. Has SPX product pump. With stainless steel electrical control cabinet. Mounted on skid. Built 2018.
MFR: Trans-Tech