Confectionary Equipment

Used ABB CRB 15000 Collaborative Robot | 6-Axis Cobot 5kg Payload w/ OmniCore Controller

Used- ABB Robotics Collaborative Robot, Model CRB 15000-5/0.95. 6 axis cobot with 5 kg payload and 0.95 m reach. The arm offers tool center point speeds up to about 2.2 m/s and repeatability within 0.02 mm, making it suitable for precise assembly, pick and place, and packaging tasks. Supplied with ABB OmniCore C30 controller and 8" touchscreen pendant, Serial #15000 800045, built 2022. Well suited for collaborative automation in packaging, electronics, medical devices, and general manufacturing, where a 5 kg payload and sub 0.1 mm repeatability are sufficient and human robot interaction is desired.

MFR: ABB

Used R.A Jones (Aerofill) Model 1695 Ultraflex Rotary 18-Head TTV Gasser Shaker

Used- R.A Jones (Aerofill) Model 1695 Ultraflex Rotary 18 Head TTV "Gasser Shaker". Capable of speeds up to 275 cans per minute (depending on application). Container size range: 1-3/8" - 3" or 35mm - 76.2mm (diam) x 5" - 10" (height) including spray tip stem. Includes Allen Bradley CompactLogix L24ER PLC, A/B panelview plus 700 HMI. Conveyor 3-1/2" wide x 107" long. 5HP 3/60/230/460V. Has a 10HP Hydraulic power pack. 3/60/480V. Multi head gasser shaker for high speed product absorption within aerosol containers, using either carbon dioxide (CO2) or nitrous oxide (N2O). This may be accomplished via pressurized gas or via equilibrium. The absorption of the gas into the product is enhanced by mechanically agitating the container during the filling process. Currently set up for 2-1/8" internal diameter x 5-1/4" tall and was last used in a dairy beverage operation. Elec: 3/60/480V.

MFR: Aerofil

Used R.A Jones Aerofill 1695 Ultraflex | High-Speed Rotary Gasser Shaker

Used- R.A Jones (Aerofill) Model 1695 Ultraflex "Gasser Shaker" Rotary 18 Head TTV. Capable of speeds up to 275 cans per minute (depending on application). Container size range: 1-3/8" - 3" or 35mm - 76.2mm (diam) x 5" - 10" (height) including spray tip stem. Includes Allen Bradley CompactLogix L24ER PLC, A/B panelview plus 700 HMI. Conveyor 3-1/2" wide x 107" long. 5HP 3/60/230/460V. Has a 10HP Hydraulic power pack. 3/60/480V. Multi head gasser shaker for high speed product absorption within aerosol containers, using either carbon dioxide (CO2) or nitrous oxide (N2O). This may be accomplished via pressurized gas or via equilibrium. The absorption of the gas into the product is enhanced by mechanically agitating the container during the filling process. Currently set up for 2-1/8" internal diameter x 5-1/4" tall and was last used in a dairy beverage operation.

MFR: Aerofil

R.A Jones (Aerofill) Model 1695 | 18-Head Rotary TTV Gasser Shaker

Used- (Aerofill) R.A Jones Model 1695 Ultraflex Rotary 18 Head TTV "Gasser Shaker". Capable of speeds up to 275 cans per minute (depending on application). Container size range: 1-3/8" - 3" or 35mm - 76.2mm (diam) x 5" - 10" (height) including spray tip stem. Includes Allen Bradley CompactLogix L24ER PLC, A/B panelview plus 700 HMI. Conveyor 3-1/2" wide x 107" long. 5HP 3/60/230/460V. Has a 10HP Hydraulic power pack. 3/60/480V. Multi head gasser shaker for high speed product absorption within aerosol containers, using either carbon dioxide (CO2) or nitrous oxide (N2O). This may be accomplished via pressurized gas or via equilibrium. The absorption of the gas into the product is enhanced by mechanically agitating the container during the filling process. Currently set up for 2-1/8" internal diameter x 5-1/4" tall and was last used in a dairy beverage operation.

MFR: Aerofil

Buy Unused Aesus Premier Shrink Sleeve Applicator — 150 CPM Capability

Unused- Aesus Continuous Motion Full Body Shrink Labeler, Model Premier Shrink. Capable of up to 150 CPM. Size range from 1-1/8" diameter up to 4.9" (198mm) diameter. Maximum lay flat 200mm. 5" Inside diameter sleeve roll core. 16" Outside diameter sleeve reel holder. Conveyor belt 4" wide. Allen Bradley Micrologix 1400 PLC, A/B panelview plus 7 HMI, Panasonic servo drive. End of film sensor, photo registration. Dual rotating sleeve applicator. Includes Aseus Deltaveyor 4" wide x 22' long, serial# 881760623. 3/60/208-240 Volt, 13 Amp. Serial# 889970523.

MFR: Aesus

Alfa Laval SPQX-512-S-31CG-60 Nozzle Disc Centrifuge. Used.

Used-Alfa Laval SPQX-512-S-31CG-60 Nozzle Disc Centrifuge, stainless steel construction (product contact areas), clarifier design (liquid/solids separation), centripetal pump liquid discharge, approx: 50 hp drive motor, belt drive.

MFR: Alfa Laval

Used Alfa Laval PX-60-VGD-140G Desludger Disc Centrifuge

Used-Alfa Laval PX-60-VGD-140G Desludger Disc Centrifuge, stainless steel construction (product contact areas), max bowl speed 6240 rpm, separator design (liquid/liquid/solids separation), 18.5 kW drive motor misc. discharge sludge expansion tank, tools. Mfg. 2003. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Alfa Laval

Used All-Fill Model V3200 Vertical Form Fill Seal Machine with Auger Filler | VFFS Packaging System

Used- All Fill Mode V3200 Vertical Form-Fill-Seal Machine with All Fill Auger Filler. Capable of speeds up to 80 bags/min (depending on application). Has a bag size range: 3" -12" (width) x 3" - 20" (length). Approx. 15" seal jaws. Has agitated hopper with level sensor and inclined discharge conveyor. Last used with 1 kg bags. 3/240V. Previously used for coffee powder. Small workbench included.

MFR: All Fill

Used Alwid Inline Monoblock Bottle & Jar Filling System – 2500–3600 Bottles/Hour

Used- Alwid Monoblock/IL Fully Automatic Inline Filling System (for bottles & Jars) with a capacity of 2500-3600 250 ml bottles/hr. consisting of: (1) Round table, 39" (1000 mm) dia on legs, (1) ALWID filler/Capper, type Matador D, 4 head filler and capper. Siemens control panel. Incl. the following star-formats change parts: 50 ml jar, 74 mm dia., 30 ml bottle, Dia. 31.5 dia x 97 mm high, 50 ml bottle 35.5 mm dia x 116.5 mm high, 100 ml bottle 41mm dia x 159 mm high, 125 ml bottle 39.5 mm x 140.5 mm high, 200 ml bottle 44.5 mm dia x 171 mm high, 250 ml bottle 46 mm dia. x 193 mm high, 400 ml bottle 53 mm dia. x 223 mm high. (1) Tunnel, (1) Round table 39" (1000 mm) dia. on legs. Previously used in a cosmetic application on creme, lotions etc. New 2007.

Used Automated Packaging Systems Autobagger AB 255 One Step Wide Bagger & Printer

Used- Automated Packaging Systems (Autobagger) Model AB 255 One Step Wide Bagger and Printer. Capable of speeds up to 30 bags per minute. Has a bag size range: 4" - 16" (width) x 5.5" - 27" (length) x .049" - .15" (bag thickness). Pass-through: 4.625" - 6" Includes Ergocon large bag shaker shelf and printer. Built in diagnostics, Automtaic bag threading, Bag deflator

MFR: Autobag

APS Model AB 255 Autobagger

Used- Automated Packaging Systems Model AB 255 (Autobagger) One Step Wide Bagger and Printer. Capable of speeds up to 30 bags per minute. Has a bag size range: 4" - 16" (width) x 5.5" - 27" (length) x .049" - .15" (bag thickness). Pass-through: 4.625" - 6" Includes Ergocon large bag shaker shelf and printer. Built in diagnostics, Automtaic bag threading, Bag deflator

MFR: Autobag

Used AWR DC-2 Automatic Machine Tending Robotic Cell – Fanuc M-20iA Robot with R-30iB Plus Controller

Used AWR DC-2 Automatic Machine Tending Robotic Cell Fanuc M-20iA Robot with R-30iB Plus Controller. Supports continuous CNC machine operation. 4 drawers of storage space for various sized parts. Maximum part weight 18 lbs, maximum part dimensions 8'' diameter x 6.5'' tall, maximum drawer weight 400 lbs. Equipped with a Fanuc M-20iA robot, and a R-30iB Plus controller. Robot uses a three-finger electric gripper. Includes a physical barrier for safety. Robot serial #R18804061, #R18904203, built 2018.