Confectionary Equipment

Used Feldmeier 3,700 Gallon Vertical Single Wall Mix Tank.

Used- Feldmeier 3,700 Gallon Vertical Single Wall Mix Tank. 316L stainless steel. Cone bottom. Tank height is 19'6". Sidewall is dented. Ladder is with the tank, no safety cage.

MFR: Feldmeier

Used – 3,800 Gallon Stainless Steel Vertical Storage Tank – 316 SS, Flat Top, Di

Used- Stainless Steel Vertical Storage Tank, Approximately 3800 Gallon Capacity, 316 Stainless Steel. Flat top, Dish bottom. Approximately 94" diameter x 128" straight side. Openings Top" (3) 2" 23" x 23" manway with cover. 2" Center bottom outlet, approximate 9" discharge height. Mounted on (4) Carbon steel legs.

Used Approximately 3900 Square Foot Kennedy Tank & Manufacturing Co Heat Exchanger

Used- Kennedy Tank & Manufacturing Co Horizontal Heat Exchanger. 304 Stainless shell and tube side. Overall dimensions: 44" diameter x 20'6" long. Shell rated 50 at 250 degree F and tubes rated 38/FV at 250 degree F. Built 1997. Mounted on short saddles. Fittings: top (1) 4", (2) 6"; shell vent/drain (2) 2"; bottom (1) 24" and (1) 6". Tubes are 15' face to face length with (990) 1" tubes. Included bolt-on dished heads. Approximately 3900 Square Foot

MFR: Kennedy

Used Tranter UFX-85-6-SP-401 Plate Heat Exchanger – High-Efficiency Thermal Transfer

Used 3,908 sq ft Tranter Superchanger Plate Heat Exchanger, model UFX-85-6-SP-401, stainless steel plates, rated 230 psi at 250 f, 12" inlet/outlet, built 2000

MFR: Tranter

Used Tranter 3,908 Sq. Ft. Superchanger Plate Heat Exchanger – Model UFX-85-6-SP-401

Used- Tranter 3,908 sq ft Superchanger Plate Heat Exchanger, Model UFX-85-6-SP-401. Stainless steel plates. Rated 230 psi at 250 degrees F. 12" Inlet/outlet. Built 2000.

MFR: Tranter

Used Kurimoto Double Arm Sigma Blade Mixer | 1500L (396.8 Gal) | 304 SS | Jacketed | EPS Application

Used Kurimoto Double Arm Sigma Blade Mixer | 1500L (396.8 Gal) | 304 SS | Jacketed | EPS Application. 304 (V2A-1.4301) Stainless Steel on product contact parts. Working capacity 396.8 gallon (1500 liter). 304 stainless steel jacket bowl with counterweights. Sigma style blades. Last used in an EPS (super absorption) application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Kurimoto Osaka

Heavy-Duty 1500L Kurimoto Sigma Blade Mixer – 304 SS, Jacketed, Double Arm Kneader

Heavy-Duty 1500L Kurimoto Sigma Blade Mixer 304 SS, Jacketed, Double Arm Kneader. 304 (V2A-1.4301) Stainless Steel on product contact parts. Working capacity 396.8 gallon (1500 liter). 304 stainless steel jacket bowl with counterweights. Sigma style blades. Last used in an EPS (super absorption) application. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Kurimoto Osaka

3M-Matic 800af Adjustable Box Sealer | 28 Cases per Minute Performance

Used- 3M-Matic Model 800af Adjustable Top Only Case Sealer, Type 39600. Capable of speeds up to 28 cases per minute, depending on application. Case size range 150mm to 760mm (6" - 30") length x 120 to 545mm (4.75" - 21.5") x 120 to 620mm (4.75" - 24.5") height. Weight 5 lbs to 85 lbs. Serial# 3447. 1/60/115 volt, 3.8 amp.

MFR: 3M

Used 3M-Matic 8000A Adjustable Case Sealer – AccuGlide Taping Head, 40 CPM (2019)

Used 3M-Matic Model 8000A Adjustable Case Sealer with AccuGlide Taping Head. Rated for up to 40 cases per minute. 4.25" to 27.75" (108mm - 704.9mm) max box height, 4.5" to 21.5" (114.3mm - 546.1mm) max box width. 6" to Unlimited box length. 2" Tape head. Side Belt drive system. Uniform Box Types. 1ph/60Hz/120V requirements. Type: 11500 Serial# 21946 M, built 2019. Overall dimensions 70" x 43" x 65"T.

MFR: 3M

Industrial Three Roll Mill - Keith Machinery 4” x 8” Cored Rolls

Used- Keith Machinery Horizontal Three Roll Mill, Model 4X8. (3) 4" Diameter x 8" wide cored rolls. Adjustable end guides, knife scraper with discharge pan. Driven by an approximate 1 hp motor. Serial # 95021B.

MFR: Keith Machinery

Used Scott Turbon DP-5-HYD Planetary Mixer – 4 Gal, Vacuum Capable, Dual Can System

Used- Scott Turbon Planetary Mixer, Model DP-5-HYD. 4 Gallon stainless steel mixing can, designed for mixing under vacuum. Vacuum hood is fitted with 2 approximately 2" sight/charge ports. First of 2 mixing cans is jacketed with a flat bottom and bottom outlet with a tri-clamp style end cap closure. The second mix can is not jacketed and has a cone bottom with a center bottom outlet with a tri-clamp end cap closure. Includes a car with foot activated hydraulic jack for mix can exchange. Also include 208 volt controls with raise and lower buttons. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Scott Turbon

Used Ross HSM-40 Vacuum Double Helical Mixer Reactor – Stainless, Jacketed, Explosion-Proof

used- Ross HSM-40 Vacuum Double Helical Mixer Reactor, 316 stainless steel. This unit will mix most things that a double planetary mixer will mix, and in many cases, better and faster. Unit has air/oil lift mechanism to raise and lower the drive to allow the removal of the mix tank. Designed for operations under vacuum & a positive pressure of 35 psi @ 350f, jacket maximum allowable working pressure 100 psi @ 350f. Minimum design metal temperature 0f at 100 psi.7.5hp motor. ross metal fabricators Serial# 11801-1, National Board# 463, CRN 15925. stainless steel contact parts. jacketed mix can with provision for thermocouple, insulated with sheathing. explosion proof motor runs on 575 volts, 3 phase, 60 hz. no controls. mixer dimensions for the ross hsm-40: 43" w x 68" l x 91" h lowered position tank id is about 23 and about 27.5 deep. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.

MFR: Ross Industries