Confectionary Equipment
Stock No.:
54280002Used 200 Gallon Stainless Steel Vertical Mix Tank – Propeller Agitated, Leg Moun
Used 200 Gallon Mix Tank, Stainless Steel, Vertical. Approximately 48" diameter, 24" straight side. Flat top (with cover), Dished bottom. Clamp-on Top entering 3-blade propeller-style agitator, driven by a 3/4hp, 3/60/208-230/460 volt, 1725rpm washguard motor. Opening Top: 2", 2-1/2" diameter. 2" Center bottom outlet with 14" discharge height. Mounted on (3) stainless steel legs. No Manufacturer Tag.
MFR: Unknown
Stock No.:
51065004Ross Model HDM 200 Double Planetary 200 Gallon Mixer
Used- Ross Double Planetary Mixer, Model HDM 200. 30-200 Gallon working capacity. (2) Carbon Steel Stirrers approximate orbital speed 24 rpm, stirrer speed 26 rpm. Top dust hood with charge port, bottom fume hood, hydraulic lift with power pack. Includes (1) 44'' diameter x 33-3/4'' deep can. Driven an 40 HP, 3/60/460 VOLT, 1740 rpm XP motor, thru Delroyd model HV120 reduction gear, 74.21 to 1 ratio. Mounted on an I beam frame. Serial# 35555. Additional mix cans available for purchase at additional cost, subject to availability.
MFR: Charles Ross
Stock No.:
51258020Used Industrial Ribbon Blender, 200 Cubic Foot, Stainless Steel, 50 HP with Rotary Valve
Used Stainless Steel Double Spiral Ribbon Blender. Approximate 200 cubic foot capacity. Has top cover and (2) bag dump stations. 50 HP motor & reducer. Center bottom outlet with rotary valve.
Stock No.:
50059005Used Howard 200 Gallon Double Arm Mixer – 304 Stainless Steel, Hydraulic Tilt
Used- Howard Double Arm Mixer, Approximate 200 Gallon, 304 Stainless Steel. Non-jacketed bowl approximate 50" left to right x 44-1/8" front to back x 34-1/2" deep. Overlapping sigma blades set up for hydraulic drive, no power pack. Dual ram hydraulic tilt, top safety grate. Mounted on a stainless steel frame. Serial# H3649-2, built 2001.
MFR: Howard
Stock No.:
44974Used Werner & Pfleiderer UK17 Double Arm Mixer – 200 Gal, Stainless Steel Clad, Jacketed
Used- Werner & Pfleiderer Double Arm Mixer, Model UK17, Stainless Steel Clad 200 Gallon. Sigma tangential blades, jacketed bowl (bottom only) 43" front-back x 53" left-right x approximately 36" deep. Geared both ends. Set up for hydraulic tilt 7.5 hp, 220/440V, 1750 rpm. No base, no drive. Our freight specialists can assist you with door to door transportation and all customs documents needed to make the process go as smoothly as possible.
MFR: Werner & Pfleiderer
Stock No.:
10128095Used Groen Inclined Agitated Kettle, 250 Gallon | Model INA-250 | 316 SS | Jacketed | 5 HP Agitator
Used Groen Inclined Agitated Kettle, 250 Gallon | Model INA-250 | 316 SS | Jacketed | 5 HP Agitator, Vertical. Approximately 54" middle diameter x 45" deep. Full jacket, upper jacket rated 40 PSI, lower jacket rated 100 PSI at 338F. Agitator driven by a 5hp 3/60/208-230/460v 1740 rpm motor. Mounted on 4 carbon steel legs. National Board #104598. Serial #104598.
MFR: Groen
Stock No.:
11252214Used Hamilton 200-Gallon Stainless Steel Agitated Kettle – 120 PSI Jacket
Used- Hamilton 200 Gallon Agitated Kettle, stainless steel construction with 3/4 jacket, rated for 120 PSI at 342 degrees F. Features top mounted full sweep agitator, currently less drive. Hinged lid top covers. Hemispherical bottom with 2-1/2" diameter center bottom outlet.
MFR: Hamilton
Stock No.:
10986027Used AB Process / JBT Mixing System | 200 Gallon Jacketed Skid-Mounted Mixer
Used AB Process / JBT Mixing System | 200 Gallon Jacketed Skid-Mounted Mixer. Jacket rated 150 PSI at 366 degrees F. 36" straight side x 41" diameter tank dimensions, cone bottom. Scrape agitator. 15 HP SPX product pump. On Mettler Toledo load cells. Mounted on skid Built 2018.
MFR: JBT Foodtech
Stock No.:
10128096Used Walker 2,000 Gallon Stainless Steel Processor Kettle | Model PZ-C3-PV | Jacketed | 3 HP Scrape Agitator
Used Walker 2,000 Gallon Stainless Steel Processor Kettle | Model PZ-C3-PV | Jacketed | 3 HP Scrape Agitator. Dished top, coned bottom. 96" OD x 72" straight side. Vessel is 10 PSIG at 250 degrees F. Jacket heat is 15 PSIG at 250 degrees F. Jacket cool is 100 PSIG at 100 degrees F. Anchor style scrape agitator, driven by a 3hp 3/60/230/460v 1760rpm motor through a reducer. Jacket has three zones with 2" valves. Jacket has 3" condensate with 4" outlet. Bottom has 3" tri clamp outlet. Top has 19" hinged manway with 4" sight glass. Nozzles on top are threaded 6", threaded 3", (2) 3" tri clamp and (2) 2" tri clamp. Serial# 75-7.
MFR: Walker