Used Plastics Grinders & Plastics Granulators

Stock# 52511003

Used- Montgomery Wood Hog Grinder, Model: 57PMKC. Infeed Opening: 51" x 21", Wear Liners: 3/4" AR plate in the upper feed area Discharge: Bottom, 66" x 22" Opening Bearings: 4-15/16" Spherical-Roller type Current Screen Size: 2" round (various screen sizes can be used) Rotor Assembly: approx. 22" Diameter x 59" Long Hammers (Teeth): Set of (19) Anvils: Set of (10) Large and (9) Small Guard Cover(s): V-Belt-drive. Recommended to use 150 hp motor (not included) Recommended RPM: 1200 RPM. Upper Infeed Hopper included.

Stock# 52283010

Used- Van Dorn Model G-200 Plastic Grinder / Granulator. Mild steel construction. Chamber measures 6-1/2" X 6-1/2" with 14" x 6" feed throat. Includes (3) rotating blades and (2) stationary blades with 7/16" (0.437") screen and 9" center bottom discharge. Driven by 2 HP, 230/460 volts, 3-phase, 60 Hz, 1140 RPM motor. Mounted on mild steel frame on casters. Serial# 283-B.

Stock# 45288018

Used- AEC Nelmor AK Series Auger Fed Granulator, Model AK68. Carbon Steel. Approximate 7-1/2" wide x 6" diameter (3) bolt on blade open rotor. Approximate 6" diameter x 32" long screw feed with enclosed tube. Includes a feed hopper, bottom catch box, set up for blower discharge with a 1hp blower, approximate 5/16" diameter screen, and controls. Screw driven by a 1hp gear motor, blades driven by a 5hp, 3/60/230/460 volt, 1755 rpm motor. Mounted on a cast carbon steel base with casters. Serial# 00E03908.

Stock# 52929002

Used- Rapid 200 Series Granulator, Model 200-36. Throughput capacity up to 100 kg/hr. 200mm Rotor diameter. Super-Tangential cutter house, opening 360mm (14.17") x 270mm (10.63"). Staggered configuration 3x3. Rotor speed 400 rpm. Driven by a 7.5hp, 3/60/230/460 volt, 1185 rpm motor. Tilt back feed hopper, bottom screen. Set up for bottom blower discharge (no blower). Mounted on forkliftable base. Serial# RA-385.172579.30.1.10.1.

Stock# 52929004

Used- Rapid Granulator, Type 819. Maximum throughput capacity 325 lbs (147kg). Approximate 8" diameter Super-Tangential with 3-blade rotor. Staggered configuration 3 x 4. Driven by a 11kW (15hp), 3/60/230/460 volt, 1760 rpm motor. Tilt back pelican style feed hopper, approximate 21-3/4" x 14-3/4". Set up for bottom blower discharge, blower with 1.5hp motor. Base mounted. Serial# 390 99.

Stock# 10755132

Used- Irwin Chesaw Granulator; Model CH-LH 28.7-04. 5" x 33" Rotor Cutter, 15 hp, 208-230/460 volt, 1760 rpm, Fan Cooled 10:1 gearbox. Lincoln Auto-Lube System. Evacuated by a 4" Auger Discharge System. Approximate 3/8" Holes Screen. Mounted on Casters. Starter and Controls for Blower, Auger System and Siemens Micromaster 440 Variable Speed Drive Unit for Granulator Rotor Speed. Also Includes 5 hp; 208-230/460 volt 3460 rpm Blower with Steel Impeller, OK100 (4") Outlet, Lab Test Machine.

Stock# 11252205

Used-Rapid Model F-19 Plastic Granulator / Grinder with Feed Conveyor. Feed throat measures 19" x 10", screen size includes 7/16" diameter opening. Feed hopper measures 22" x 18" x 24" with 20" x 11" inlet and bottom discharge. Grinder driven by 15 HP (11 kW), 230/460V, 1760 RPM, 3/60Hz motor (wired for 460V). Unitized on frame with casters. Includes control panel. Grinder offered with Jorgensen Incline belt conveyor with 16" wide cleated metal belt. Unit has 13" flat infeed section, 96" flat infeed section,84" long incline section and 20" long discharge section. Belt measures 16" wide, cleats are 16" wide x 1/8" thickness x 1-1/2" high, 12-1/2" spacing between cleats. Driven by 1/2 HP, 115/230 V, 3/60hz, 1725 RPM motor, includes DC speed control 115V, 1-phase power input. New in 2008.

Stock# 52791001

Used- Desislava Granulator, Model 500/800. 20 HP, 3/60/460 volt electric motor. 5/16" screen, vacuum take-off bin, 20" x 31"chamber opening, open style rotor, (5) rows, front and back bed blades (2) rows (2 blades on each row), 500 x 800 mm cutting diameter.

Stock# 52929003

Used- Rapid Rage Granulator. Open rotor, approximate 36" long. Driven by a 25hp, 3/60/230/460 volt, 1777 rpm motor. Tilt back feed hopper, approximate 36" x 21" opening. Set up for bottom blower discharge (no blower). Mounted on forkliftable base. No manufacturers tag.

Stock# 51803001

Used- AEC HydReClaim Scrap Film Grinder, Model 1218. 25 HP motor; 5 HP Blower Discharge. Built 1995. Overall dimensions 82" x 60" x 82". Approximately 2500 lbs.

Stock# 44496015

Used- Sprout Waldron Granulator, 15" x 18" feed. 30 Hp motor. Previously used for recycling polyester film edge trim.

Stock# 44496016

Used- Sprout Waldron Granulator, 15" x 18" feed. 30 Hp motor. Previously used for recycling polyester film edge trim.

Stock# 44496018

Used- Sprout Waldron Granulator, 15" x 18" feed. 30 Hp motor. Previously used for recycling polyester film edge trim.

Stock# 10755147

Used-Tria Model 900 NS-R Pull Roll Granulator. 12.5" x 40" feed throat (1020mm x 320mm). Five (5) knife open rotor with two (2) bed knives. Rotor is belt driven by a 22 Kw (30 HP). Feed hopper with rear mounted 36" wide steel / serrated pull rolls. Air actuated feed rolls are powered by a 1 Kw (1.5 HP) A/C motor. 9" x 19.5" front material hopper entrance. 12.6 Kw (17 HP) blower discharge with Kongskilde OK160 piping and cyclone with filter bag. Approximate production rate of 400-600 kg/hr. (880-1320 lbs./hr.). Includes free standing panel with controls. 480/3/60

Stock# 10755129

Used- Cumberland, Model 2428I Granulator. 24" x 28" feed throat. 3 knife twin shear open rotor. 2 bed knife. 40 hp 230/460 volt motor. Tray feed hopper. 8" right hand airveyor discharge mounted on step base. Complete with starter and controls.

Stock# 44496008

Used- Cumberland, Model 18X37, Granulator. 18" X 37" Feed Throat. 5-Knife Steep Angle Step Adjustable Rotor Knives (10 Segments). 2- Bed Knives. Designed for Film Granulation. Belt Driven by a 100 HP, 460 Volt, 1780 RPM Motor. Gravity Discharge. 6" Diameter x 37" Wide Knurled and Grooved Offset Position Feed Roll Infeed with Pneumatic Pinch. Feed Roll Infeed Trumpet, Feed Rolls are Chain and Sprocket Driven by a 7.5 HP, 1750/1930 RPM Continuous Duty, DC Motor Thru a Reliance 2.76/1 Gearbox. All Mounted on Leg Base. Swing Out Chamber Door on Downstroke Side. Starter and Controls are not included.

Stock# 53366001

Used- Cumberland Model 1837B granulator. 18" x 37" feed throat. 3 knife high shear rotor with two bed knives. Belt driven rotor by a 100 HP, 3/60/230/460 volt, 1775 RPM motor. Tray in-feed hopper. 84" x 72" x 30.5" tall plate base. No airveyor (gravity discharge). Has 5/8" holes screen installed and includes spare used 3/8" holes screen. Serial# 50510-10004. Built 2010. No starter, no control.

Stock# 53377001

Used- M.A. Industries, 750 Grinder / Granulator, Model P7501006-0-0791, 200 HP AC Motor. With soft start and control panel. Feed Hopper. 1/2" screen, 3 new fly blades, 2 new bed knives, Open rotor,

Stock# 52920001

Used-Cumberland Granulator, Model 37F. 7 knife rotor. Driven by a 200 HP, 3/60/460 Volt, 1780 RPM motor. Includes a panel. Mounted on a carbon steel frame.

Stock# 53225001

Used- Cumberland Model 3250 HOG Granulator. 32" x 50" Feed throat. 36-knife hog rotor, 2 bed knife (4 pcs raised one side). Dual fly-wheels. Belt driven rotor powered by a 250 HP, 885 RPM, 3/60/460-volt motor. Tray style in-feed hopper. 10" OD airveyor discharge. Mounted on common plate base. Starter and controls for granulator and blower are not included. Rotor has two (2) damaged knife seats. Serial# 57050-754-R.