Your Files Are Being Processed
Please Wait
Contact Information
Phone: 630-350-2200
Toll Free: 1-800-49-AARON
Email: [email protected]
For more information on listing your equipment with Aaron contact Ricky Schmidt or click here for more information on our listing services.
Surplus Equipment for Sale?
We make this quick and easy!
Used- Davis Standard Co-Extrusion 78" Wide Sheet Line. Consisting of the following: Davis Standard 6" Extruder Model # 60IN60TPIH, Serial # V8036, SO # 61167, Built 5/98. 30:1 L/D Ratio, top vented barrel. Electrically heated, water cooled. Unit direct connected to 400 hp DC motor and Drive Gearbox rated to 645 hp, 1.5 service factor, 13.4:1 ratio, screw rpm is 100. Unit included a unitized control panel having 6 barrel zones, 15 downstream zones, all are Eurotherm digital controllers, GE Fanuc 90-30 PLC, Magnetek GPD 5/5 drive, GE DV-300 Drive. Extek 6" hydraulically operated slide plate screen changer, Model HSC-60, Serial # H60320, requires power pack. LCI Corp melt pump, Model ES 90/90, Serial # 1985. Wintek Corp/DVT vacuum system, with Model DV0100B-KA3 pump, driven by a 7-1/2 hp motor. Die block. Co Extruder Davis Standard 3.5" Extruder Model # MV-35IN35, Serial # V8039, SO # 61167, Built 5/98. 30:1 L/D ratio side vented barrel. Electrically heated and water cooled. Unit Direct connected 150 hp DC Motor thru Gearbox having 17.39:1 ratio, 158 hp capacity, 1.254 service factor, 100 rpm screw speed. Unitized control panel with Eurotherm temperature controllers (5) barrel zones, (6) downstream zones, GE Fanuc 90-30 PLC, Yasakawa Varispeed F7 VFD, GE DV-300 Drive. Extek 3.5" hydraulically operated slide plate screen changer, Model HSC-35, Serial # H35338, requires power pack. LCI Corp melt pump, Model ES 56/56, Serial # 1995. Wintek Corp/DVT vacuum system, with Model DV0100B-KA3 pump, driven by a 7-1/2 hp motor. Both extruder connect thru EDI Ultraflow Co-EX die block to EDI Ultraflex HRC-100 78" wide Restrictor bar sheet die and manual deckling option, mass 3676 pounds, Serial # 98-19772 with die cart. Davis Standard 24" x 78" three roll chrome downstack operation. Hydraulic roll adjustment. Rolls are gear driven by a common 7.5 hp, 3/60/460 volt, 1762/3525 rpm gearmotor, 200 to 1 ratio. Eurotherm temperature controllers for rolls. Water cooled rolls with DS water system consisting of (3) centrifugal 10 hp pumps, (3) heat exchanger with unitized control with (2) Yasakawa GPD515/65 drive for rollstand and pull roll, Magnetek GPD333 drive for sheet stack locomotive, GE Fanuc 90-30 PLC. Miller fluid power hydraulic power unit. Conveying section including a NDC Technologies Model T2-65 scanning device, Serial # 4752. Davis Standard Haul Off rubber pull roll stand, (2) approximate 8" diameter x 78" wide rubber rolls, driven by a 7.5 hp gearmotor, 143.47 to 1 ratio Seria l# V-8056, S.O.# 61167, built 5/98. Vulcan sheet stacker, (2) 36" wide x 72" long conveyor belts driven by 1 hp motor, has Emerson FX-490 servo drive, GE fanuc 90-30 PLC. Includes power take off table.
"Dealing with Aaron is an easy and enjoyable process"
"Aaron Equipment is always my first call for used process equipment. Their inventory and customer service has ensured successful project results every time. Thanks y’all!"
"I have purchased all different types of equipment from Aaron Equipment over the last 10 years and have always been 100% happy with not only the equipment but with their customer service!"
"Working with Aaron Equipment Company was as easy as it gets."
"It is a pleasure to work with AEK and I would recommend them as an equipment supplier."
"The partnership we enjoy with Aaron has helped our business to be what it is today – thank you guys!”
"I will definitely use Aaron Equipment in the future."
"Aaron’s customer service indicates that they want long term partnerships and that is something we especially appreciate."
"I really value shopping for used equipment from Aaron Equipment Company because the information they present is accurate, their prices fair and their customer service is the best…Highly recommend."
"This is my first time using Aaron Equipment to purchase equipment. They were easy to work with and things were done quickly and efficiently. I will be a repeat customer when the need arises. This is a trustworthy company that delivers what they advertise."
"I have purchased multiple pieces of equipment through Aaron equipment over the past 15 years. The staff has been very knowledgeable on every request & have spent countless hours ensuring that the equipment I was purchasing met my expectations."
"I have been doing business with Aaron equipment for many years. This year I had the need for some used equipment in a new business Venture. I got in touch with Ryan Davies. I could not be happier with the response and honesty exhibited by him. Dealing with them was a pleasure and everything was as represented. Fair an Honest is how I would describe them."
“Aaron Equipment was very easy to get into contact with and get a price on a un-used chiller they were selling. The process was seamless and very easy on our end and we had the equipment much faster than going out for bid on it to multiple vendors and we able to come in under budget on the project.”
Used- Davis Standard Co-Extrusion 78" Wide Sheet Line. Consisting of the following: Davis Standard 6" Extruder Model # 60IN60TPIH, Serial # V8036, SO # 61167, Built 5/98. 30:1 L/D Ratio, top vented barrel. Electrically heated, water cooled. Unit direct connected to 400 hp DC motor and Drive Gearbox rated to 645 hp, 1.5 service factor, 13.4:1 ratio, screw rpm is 100. Unit included a unitized control panel having 6 barrel zones, 15 downstream zones, all are Eurotherm digital controllers, GE Fanuc 90-30 PLC, Magnetek GPD 5/5 drive, GE DV-300 Drive. Extek 6" hydraulically operated slide plate screen changer, Model HSC-60, Serial # H60320, requires power pack. LCI Corp melt pump, Model ES 90/90, Serial # 1985. Wintek Corp/DVT vacuum system, with Model DV0100B-KA3 pump, driven by a 7-1/2 hp motor. Die block. Co Extruder Davis Standard 3.5" Extruder Model # MV-35IN35, Serial # V8039, SO # 61167, Built 5/98. 30:1 L/D ratio side vented barrel. Electrically heated and water cooled. Unit Direct connected 150 hp DC Motor thru Gearbox having 17.39:1 ratio, 158 hp capacity, 1.254 service factor, 100 rpm screw speed. Unitized control panel with Eurotherm temperature controllers (5) barrel zones, (6) downstream zones, GE Fanuc 90-30 PLC, Yasakawa Varispeed F7 VFD, GE DV-300 Drive. Extek 3.5" hydraulically operated slide plate screen changer, Model HSC-35, Serial # H35338, requires power pack. LCI Corp melt pump, Model ES 56/56, Serial # 1995. Wintek Corp/DVT vacuum system, with Model DV0100B-KA3 pump, driven by a 7-1/2 hp motor. Both extruder connect thru EDI Ultraflow Co-EX die block to EDI Ultraflex HRC-100 78" wide Restrictor bar sheet die and manual deckling option, mass 3676 pounds, Serial # 98-19772 with die cart. Davis Standard 24" x 78" three roll chrome downstack operation. Hydraulic roll adjustment. Rolls are gear driven by a common 7.5 hp, 3/60/460 volt, 1762/3525 rpm gearmotor, 200 to 1 ratio. Eurotherm temperature controllers for rolls. Water cooled rolls with DS water system consisting of (3) centrifugal 10 hp pumps, (3) heat exchanger with unitized control with (2) Yasakawa GPD515/65 drive for rollstand and pull roll, Magnetek GPD333 drive for sheet stack locomotive, GE Fanuc 90-30 PLC. Miller fluid power hydraulic power unit. Conveying section including a NDC Technologies Model T2-65 scanning device, Serial # 4752. Davis Standard Haul Off rubber pull roll stand, (2) approximate 8" diameter x 78" wide rubber rolls, driven by a 7.5 hp gearmotor, 143.47 to 1 ratio Seria l# V-8056, S.O.# 61167, built 5/98. Vulcan sheet stacker, (2) 36" wide x 72" long conveyor belts driven by 1 hp motor, has Emerson FX-490 servo drive, GE fanuc 90-30 PLC. Includes power take off table.
or
HAVE A SIMILAR MACHINE FOR SALE?If you have an account with us, login using your email address.
This is a secure server. Aaron does not sell or rent information to third parties. Please read our Privacy Policy for more information.
This email ID already has an account. Would you like us to email you the Password
If you would like to be sent your password, please enter your email address below and press submit. We will send you an email with your password.
Thank You, your password has been Sent.
We pay "Top Dollar" for your idle process equipment! Fill out our form and our buying team will get back to you.
SELL YOUR EQUIPMENTView our entire process equipment inventory online or visit our location for an equipment inspection.
View InventoryEmail or call us to speak with an equipment specialist to answer any machinery questions you may have.
630-350-2200