Used Horizontal Injection Molders

Stock# 49422010

Used- Borche Horizontal Injection Molding Machine, Model BU600. 674 ton capacity; 82 oz. shot size; 6000 kN clamping force; 47.63" x 47.63" platen size; 68.89" maximum daylight; 11.81"/34.25" mold thickness; KEBA 2580 controller. Built in 2018. Serial# 1312Q021

Stock# 52836001

Used-Cincinnati Injection Molding Machine; Model VH400-41. 400 ton capacity, 41 oz Hydraulic Platen. 40x40 Tie Bar 29x29 Camac. 486 Controller Corepull.

Stock# 53145001

Used- DS Machinery Dima Injection Mold Machine, Model DMT 650. 650 ton capacity. 92 oz shot size. Opening stroke maximum 33", Mould height minimum 16.5" (420mm), Mould height maximum 35" (890mm), Daylight maximum 70", Distance between tie-bars 35.43" (840mm) x 35.43" (840mm), Platen size 52" (1320mm) x 52" (1320mm), Ejector force maximum 17.2 Ton. 55,562 hours. Serial# A60493.

Stock# 49422013

Used- Haitian Horizontal Injection Molding Machine, Model MA III S 4700/3200-A. 528 ton ( 4700 kN) capacity; 45.7 oz. shot size; 32.28" x 31.5" tie bar spacing; 47.64" x 46.64" platen size; 61.42" maximum daylight. Built in 2021.

Stock# 52914001

Unused - Krauss Maffei Horizontal Injection Molding Machine, 1760 Tons, Model 1600-17200 MX. 1760 Ton Clamp Force. 17200 plasticizing size. Approximate 241.97 oz. (6.86 kg) shot size. Platens approximate 100.3937" x 82.67717", Distance between tie bars 73.6" x 55.9", Mold opening stroke 13.39", Maximum daylight 133.85", 7 heating zones, 135mm screw diameter, 10mm nozzle radius, 4mm nozzle bore, 460 volt/60Hz . Includes: MC6 Control, PV-closed loop control for injection unit, hydraulic-mechanical 2 platen clamping system. (4) locking devices and (4) pressure pads. Wedge type anti-vibration pads; Shim plates; Horizontal stops for fixing machine; Electric screw motor; Blue Power-Servo pump drive; Steel hopper; Cylindrical valve type shut-off nozzle HSVS; Pneumatic valves on moving and fixed platens for blow function; Pneumatic cascade control; Maintenance unit for treatment of oil-free compressed air; Hydraulic cascade control; Electric interface on fixed platen; Mold fixing platens; Mechanical robot interface; Mechanical preparation for future retrofitting of a mechanical progressive drop-in bar; Hydraulically actuated ejector plate; Hydraulic operated safety gate; Tie bar retraction system; Internal oil filtration; Level sensor for oil drip tray; Increased oil cooler; Pressure gauge; Pressure accumulator; Hydraulic core pull system on moving and fixed platens; Hydraulic ejector and cores on moving platen; Twin pressure check valves for hydraulic core pulls; Extended parallel movements of injection unit; Cooling water connections; 2 Additional circles; Cold slug ejection; Control cabinet cooling fan; TN-C/TN-C-S/TN-S power supply capability; Separate heat and power circuit connections; Additional temperature zone for nozzle heater; Data logbook; Stabilized power supply unit; Quality monitoring package; Cycle time recording/analysis; TFT color screen; Graph displays; Automatic maintenance alerts; PV-closed loop control; 110 and 220V outlets; Electronic coding

Stock# 53317001

Used- Nissei Plastic Injection Molding Machine, Model NS40E5A, 44 US ton clamping force Converted the power from 230V to 460V and installed an on/off switch. Shot Size: 2.1 oz. Tie Bar Spacing: 12.2 x 12.2 in Screw diameter: 30 mm Min Daylight: 5.9" Max Daylight: 11.7" Platen size: 17.7" x 17.7" Controller: NC21. Serial# E40P034. Overall Dimensions: 112"L x 31"W x 62"H Weight: 2976 lbs.

Stock# 49422011

Used- Toshiba Horizontal Injection Molding Machine, Model ISGS 390. 390 ton capacity; 63 oz. shot size; 31.8" x 31.8" tie bar spacing; 43.3" x 43.3" platen size