Used Twin Screw CoRotate Extruders

Stock# 52915001

Used- Leistritz LSM 30.34 Twin Screw Co-Rotating Twin Screw Extruder; 300 RPM; 460V 3 Phase 50 Pounds Per Hour Extra strand die Extra set of screw shafts Extra set of Screw elements. Main extruder motor reported to be reconditioned.

Stock# 53115001

Unused- Theyson TSK 060-44D-EXH 1500 Twin Screw Extruder. 60mm Diameter screws. 44:1 L/D. Maximum screw speed 500 RPM via a gearbox by a 55kW, 1500rpm. 380volt/50cycle/3Ph Ex-proofed motor. 11 housing sections. Electrically heated, water cooled. Includes (1) Brabender volumetric feeding system, type DSR67B. Stainless steel hopper with agitator. Capacity 440 lbs./hr. (200 kgs/hr.). 0.37 kw AC motor, (1) Die head, (3) GWK temp. control units, type P90 & P160, (1) Siemens S7-300 control/operating panel and additional infrastructure. Built 2015. Serial # TSK060-6112185. Job # 6112185.

Stock# 10151389

Used-20mm Werner & Pfleiderer Model ZSK20 Co-Rotating Twin Screw Extruder. Has 40/1 L/D barrel at 43" centerline height driven through a 3:1 gearbox with a 37-Newton meter torque capacity per screw shaft. Extruder is powered by 5 hp AC motor with Allen Bradley 1336 impact drive unit, 588 rpm screw speed. Includes Brabender 1/2 hp model MS-FW40/Optus-70 feeder, spare used motor and gearbox.

Stock# 51909005

Used- Leistritz Twin Screw Extruder, Model MIC 27/GGC-40D. Throughput rates approximate 10 to 80 lbs/hr. 40:1 L/D. (2) Screws approximate 27mm (1") diameter x 48" long, co-rotating. Electrically heated, water cooled. Includes operators panel with Quantum III DC Drive and Eurotherm controllers. Screw rpm 500. 12kW (15hp) DC motor drive. Mounted on casters. Serial# 2567, built 1997. Unit with controls but no barrels.

Stock# 52200002

Used-Crown 40mm Co-Rotating Twin Screw Extruder. 40:1 L/D Ratio; 600 rpm Screw Speed; 100 HP AC Inverter Duty Motor with ABB ACS800 Inverter Drive; 10 Barrel Zones, High Temperature Cast Bronze Heaters, Water Cooled Barrel; Gefran Digistar II Touch Screen Control Panel, Solid State Relays. 17 Hole Strand Die. Built 2010.

Stock# 52622001

Used-Comac Twin Screw Extruder, Type EBC 40HT/37D. 40 mm, 37:1 L/D. Production capacity 330-550 lbs/hr. (150-250 Kg/hr.). Maximum screw speed 600 RPM via a gearbox by 51 Kw AC Exp. motor. 7 housing sections includes 2 degassing ports. Electrically heated, water cooled. Includes (1) Fitec Water Ring Pelletizer, type GRO250, (1) Degassing unit without pump (1) Siemens control panel. New year 2004. Previous used in a Masterbatch application.

Stock# 10151368

Used-Werner & Pfleiderer Model ZSK40, 40mm Co-rotating twin screw extruder. 1990 Model year. 46:1 L/D vented barrel with 11-barrel sections and a 41" centerline height. Driven by 50 hp 500 volt 1750/2100 rpm DC motor with SCR control and with a screw speed of 517 rpm. Includes Acrison 1.5 hp weight loss differential feeder, 2.2 kw Tervac vacuum pump, and side feeder.

Stock# 52546001

Used- Leistritz 60mm ZSE MAXX Twin Screw Extruder, Type ZSE60MAXX-20D. (2) Co-rotating screws approximately 2.44" diameter x 62" long. Speed 400 rpm. Approximate 20 to 1 L/D ratio. 4 Barrel sections, 1 feed section. Liquid heated and cooled. 4-Cooling zones. Screws driven by a 121kw (160hp), 1600 rpm motor thru a gearbox. Leistritz model LSB 56 twin screw side feeder, driven by 3.45kW, 3/60/264/460 volt, 1700 rpm gear motor, 5.3 to 1 ratio. Rickmeier pump, driven by a 1.4kW motor, thru Funke plate heat exchanger. Includes drive panel with Siemens Sinamics controller. *No main control panel*. Mounted on frame with wheels and adjustable feet. Serial # 04144, order # 310.1121.01. 3/60/480 Volt, 294 Amp.

Stock# 52792001

Used- Berstorff ZE62 x 44D 62mm Twin Screw Extruder. Requires approximate 62mm x 104" long screws. 44/1 L/D. Electrically heated, water cooled. (9) barrel heating zones. Driven by Reliance AC 250 HP, 480/3/60 VAC, 3,000 RPM (limited to 242 HP). Flender gearbox, Year 2005, Serial# 4140712-0020-1, Ratio: 5:1. Control panel with Allen Bradley Drive PowerFlex 700S drive. Allen Bradley VersaView 1200P HMI. 4" X 4" Feed throat. Approximate 48" centerline height. Missing Screws.

Stock# 52792002

Used- Freesia-Macross NRII 75mm SG Co-rotating Twin Screw Extruder. 40 L/D. Approximate 75mm diameter x 115" long screws. Electrically heated, water cooled. Approximate capacity 500 - 1500 kg/hr. Driven by a 150hp GE KinaMatic Direct current motor, 1750/2000 rpm, 500 volt. Approximate 5" x 4" water cooled feed throat. Twin screw feeder. Approximate 32" centerline height. Drive panel with (11) temperature controllers.

Stock# 53123001

Used- Baker Perkins SBX80 (2021) Co-rotating Twin Screw Extruder. 4000 Hours. includes spare elements, second set of agi-shafts, and hydraulic screw puller cart. Last used for industrial production of starch product. Also available is gearbox chiller and super sack unloader.

Stock# 51096002

Used-Coperion Werner & Pfleiderer Continua 90 Twin Screw Extruder. Screw diameters 2 x 3.5" (90 mm). 26:1 L/D. (5) Barrel section oil heated. (1) Degassing zone. Screw speed 300 RPM via a gearbox by a 165 HP (110 KW) motor. Complete with double screen changer, stainless steel water-bath, guillotine, hydraulic unit, oil heater, vacuum pump, control panel and additional infrastructure. Previous used in a Butyl sealant application. Weight approx. 6 tonnes.