Your Files Are Being Processed
Please Wait
Contact Information
Phone: 630-350-2200
Toll Free: 1-800-49-AARON
Email: [email protected]
For more information on listing your equipment with Aaron contact Ricky Schmidt or click here for more information on our listing services.
Surplus Equipment for Sale?
We make this quick and easy!
Used-Jaygo Laboratory Double Arm Sigma Blade Mixer, Model NHF-5 Capacity: Total: 5 liters Working: 3 liters (Actual working capacity is product dependent). Contact parts: 304 Stainless Steel. Double trough shell with end plates fabricated from steel plate. Trough and end plates are ground and polished smooth. Blades: 304 Stainless Steel cast Sigma blades, tangential mixing action, including Stainless Steel shafts supported by outboard bearings and driven by heavy-duty gearing. Jacket: On trough, designed for 14.9 psig pressure water or oil at 425 F. Insulation and sheathing over all jacketed surfaces. NPT jacket connections on upper sections of mixer trough. Drain in bottom center of jacket. Shaft Seals: Standard packing glands with braided PTFE and adjustable followers. Cover: 304 SS domed cover, with O-ring in groove, lift handle, limit switch, FNPT connection in cover center, quick-release clamps, and hinge at side of mixer trough. Discharge: Mixer tilted manually with worm-wheel gearbox assistance. Drive: 1HP TEFC motor direct connected to right angle gearbox, coupling, and end case gear reducer. Blades speed is variable Approx. 070 RPM front blade and 050 RPM rear blade (ratio between blade speeds is fixed). Guards: All gears, couplings, and rotating shafts guarded to prevent operators from contact. Frame: Mixer body mounted on Carbon Steel support table on wheels. Finish: All product contact parts are polished to uniform finish. All non-product contact parts are 304 SS buffed uniform finish or carbon steel painted. Controls: NEMA 4 enclosure mounted on machine frame and wired to motor and limit switch, with following operators push buttons: Mix/Stop; Emergency Stop; Speed Potentiometer with Digital Speed Readout (front blade speed); Power On light; Power Disconnect ;Step up transformer installed on lower shelf and wired to mixer control panel; Customer to wire 208V/3/60Hz electrical supply to step up transformer
"Dealing with Aaron is an easy and enjoyable process"
"Aaron Equipment is always my first call for used process equipment. Their inventory and customer service has ensured successful project results every time. Thanks y’all!"
"I have purchased all different types of equipment from Aaron Equipment over the last 10 years and have always been 100% happy with not only the equipment but with their customer service!"
"Working with Aaron Equipment Company was as easy as it gets."
"It is a pleasure to work with AEK and I would recommend them as an equipment supplier."
"The partnership we enjoy with Aaron has helped our business to be what it is today – thank you guys!”
"I will definitely use Aaron Equipment in the future."
"Aaron’s customer service indicates that they want long term partnerships and that is something we especially appreciate."
"I really value shopping for used equipment from Aaron Equipment Company because the information they present is accurate, their prices fair and their customer service is the best…Highly recommend."
"This is my first time using Aaron Equipment to purchase equipment. They were easy to work with and things were done quickly and efficiently. I will be a repeat customer when the need arises. This is a trustworthy company that delivers what they advertise."
"I have purchased multiple pieces of equipment through Aaron equipment over the past 15 years. The staff has been very knowledgeable on every request & have spent countless hours ensuring that the equipment I was purchasing met my expectations."
"I have been doing business with Aaron equipment for many years. This year I had the need for some used equipment in a new business Venture. I got in touch with Ryan Davies. I could not be happier with the response and honesty exhibited by him. Dealing with them was a pleasure and everything was as represented. Fair an Honest is how I would describe them."
“Aaron Equipment was very easy to get into contact with and get a price on a un-used chiller they were selling. The process was seamless and very easy on our end and we had the equipment much faster than going out for bid on it to multiple vendors and we able to come in under budget on the project.”
Used-Jaygo Laboratory Double Arm Sigma Blade Mixer, Model NHF-5 Capacity: Total: 5 liters Working: 3 liters (Actual working capacity is product dependent). Contact parts: 304 Stainless Steel. Double trough shell with end plates fabricated from steel plate. Trough and end plates are ground and polished smooth. Blades: 304 Stainless Steel cast Sigma blades, tangential mixing action, including Stainless Steel shafts supported by outboard bearings and driven by heavy-duty gearing. Jacket: On trough, designed for 14.9 psig pressure water or oil at 425 F. Insulation and sheathing over all jacketed surfaces. NPT jacket connections on upper sections of mixer trough. Drain in bottom center of jacket. Shaft Seals: Standard packing glands with braided PTFE and adjustable followers. Cover: 304 SS domed cover, with O-ring in groove, lift handle, limit switch, FNPT connection in cover center, quick-release clamps, and hinge at side of mixer trough. Discharge: Mixer tilted manually with worm-wheel gearbox assistance. Drive: 1HP TEFC motor direct connected to right angle gearbox, coupling, and end case gear reducer. Blades speed is variable Approx. 070 RPM front blade and 050 RPM rear blade (ratio between blade speeds is fixed). Guards: All gears, couplings, and rotating shafts guarded to prevent operators from contact. Frame: Mixer body mounted on Carbon Steel support table on wheels. Finish: All product contact parts are polished to uniform finish. All non-product contact parts are 304 SS buffed uniform finish or carbon steel painted. Controls: NEMA 4 enclosure mounted on machine frame and wired to motor and limit switch, with following operators push buttons: Mix/Stop; Emergency Stop; Speed Potentiometer with Digital Speed Readout (front blade speed); Power On light; Power Disconnect ;Step up transformer installed on lower shelf and wired to mixer control panel; Customer to wire 208V/3/60Hz electrical supply to step up transformer
or
HAVE A SIMILAR MACHINE FOR SALE?If you have an account with us, login using your email address.
This is a secure server. Aaron does not sell or rent information to third parties. Please read our Privacy Policy for more information.
This email ID already has an account. Would you like us to email you the Password
If you would like to be sent your password, please enter your email address below and press submit. We will send you an email with your password.
Thank You, your password has been Sent.
We pay "Top Dollar" for your idle process equipment! Fill out our form and our buying team will get back to you.
SELL YOUR EQUIPMENTView our entire process equipment inventory online or visit our location for an equipment inspection.
View InventoryEmail or call us to speak with an equipment specialist to answer any machinery questions you may have.
630-350-2200