Used Cutters, Dicers and Slicers

Stock# 53290004

Used- Biro Meat Saw, Model 22. 12" (30.5cm) diameter blade wheels. 91" (231cm) saw band. Driven by approximate 1-1/2HP motor. Mounted on (4) legs. Serial# 2213169.

Stock# 11252189

Used-Eillert Dicer, Type BL 1000 VAR, Unit includes rotary feed to stationary crosscut knife assembly with adjustable spacing. Requires circular knife assembly and stripper plate. Includes controls and main drive. Driven by 2-phase, 230 V motor. Previously used in food operation.

Stock# 52524016

Used-Grote Stainless Steel Sanitary Slicer; Model 636; Slice and apply or bulk slice up to 150 strokes per minute, per lane; stack and shingle up to 120 strokes per minute, per lane; Product Size: up to 6" (152.4 mm) diameter; Slicing Zone: 22", 30" or 40" wide; Slice Thickness: up to .5" (12.7 mm) standard, up to 1.5" (38.1 mm) optional; Slicing Zone Widths:22" (558.8 mm), 30" (762 mm), or 40" (1016 mm); 200-575 VAC, 50/60 Hz, 3 Phase; 40-100 PSI

Stock# 53332001

Used- Johnson Model CJ-9200 Industrial Dual Chamber Cheese Shredder. Capable of up to 10,000 lbs per hour (depending on application). Dual containment chambers: 24" x 8" x 12" each. 33" Shred wheel. Upgraded safety package in 2021 from Tetra Pak.

Stock# 47760001

Used- Stephan TC Combicut Mixer, Model TC 600, 304 Stainless Steel. Drum capacity 600 liter, batch size 200 to 420 liter, capacity up to 2700 liters per hour. Jacketed drum approximate 43" diameter x 25" deep, rated 2 bar at 134 degrees C. Hinged front jacketed door with a mixing baffle/scraper driven by a 15 hp, 3/60/230/460 volt, 1750 rpm gear motor, ratio 65.51 to 1. (1) Trapezoidal kneading element driven by a 104 kw, 3/60/460 volt, 1180 rpm motor. Top mounted ingredient hopper with slide gate valve, bottom outlet with a slide gate valve. Includes a hydraulic power pack, control panel (2) feed hoppers. Mounted on a stainless steel frame with 40" tall legs. Serial# C85-711.036.01.

Stock# 49112002

Used- Stephan TC/SK Combicut Mixer, Model TK-850-S, 304 Stainless Steel. Drum capacity approximate 850 liter, batch size 300 to 570 liter, capacity up to 3600 liters per hour. Drum approximate 46" diameter x 30" deep. 14" x 15.25" infeed, 21.5 in x 13" discharge. Hinged front door with mixing baffle/scraper driven by approximate 15 hp motor. Kneading element (Incomplete) driven by a approximate 100/120kW motor. Includes control panel with Allen Bradley controls. Serial # 3353393.

Stock# 50907002

Used- Stephan Cutter / High Speed Universal Horizontal Vacuum Mixer, Stainless Steel. Jacketed 29" diameter x 17" deep SS bowl. Hydraulic slide gate discharge 12" x 10". Driven by a 15 kw drive, with Stephan Stainless steel hopper 32" x 12" straight side x 22" cone. Pneumatic butterfly valve, Stephan incline discharge conveyor, 24" wide x 80", discharge, with control panel. Serial # 718781. No tag on the Mixer, but it appears to look like a Model TK150. Used for Dough/ Bakery.

Stock# 52156001

Used- Urschel Comitrol Processor, Model 3600, Stainless Steel. Approximate 7" diameter x 3" deep cutting head, impeller driven by approximate 10hp motor with brake. Has feed hopper. Mounted on stainless steel frame with casters. Serial# 249. Last used in Aloe.

Stock# 48193006

Used- Urschel Model GK-A Dicer. Currently Set 3/8" Dice. Electrical requirements: 460 Volt, 3 Phase Impeller housing is grooved. Stainless steel construction. Mounted on casters. Serial# 4768.

Stock# 11252184

Used- Urschel Model G-A Dicer, set up for 1/2" x 3/4" dices. All stainless-steel construction. Includes feed chute with 18" x 12" opening, leading to rotary wheel/cutting blade. Also includes all guards and chutes, with safety sensors. Driven by approximately 2 HP motor, wired for 460-volt. Mounted on stainless steel frame with control panel. Previously used at production kitchen to supply meals for school district.

Stock# 11252185

Used-Urschel Model G-A Dicer, set up for 5/16" dices. Driven by 2 HP, 208 Volt, 3-phase 60 Hz motor. Previously used at production kitchen to supply meals for school district. Manufacturer info: The Model G-A produces uniform dices, straight French fry strips, and slices from a variety of soft ripe fruits and brittle root vegetables. Maximum infeed product entering either machine should not exceed 5-1/2" (140 mm) in any dimension. A wide selection of interchangeable cutting parts enables the user to obtain gentle, clean cutting through a wide range of sizes at high production capacities. Mounted on stainless steel portable frame with control panel.

Stock# 11252186

Used-Urschel G Dicer, driven by 2 HP motor, previously dicing apples 3/8" x 3/8". Currently less cutting blades..

Stock# 11252187

Used-Urschel M Dicer / Strip Cutter, Stainless Steel construction. Capable of cutting square or rectangular dices from 1/8" x 3/16" to 1-1/2" x 3", maximum thickness 1". Belt fed to dicing area with feed roll, circular knives, stripper plate, feed drum, crosscut knives. Complete with drive and control panel. Mounted on a stainless steel frame.

Stock# 53346001

Used- Urschel Comitrol 1700 Processor with Brake. Driven by a 40 HP Motor. Mounted on a Stainless Steel Stand.Serial # 3313.

Stock# 53346002

Used- Urschel Comitrol 1700 Processor with Brake.Driven by a 40 HP Motor. Mounted on a Stainless Steel Stand. Serial # 3314.

Stock# 53346003

Used- Urschel Comitrol 1700 Processor with Brake. Driven by a 40 HP Motor. Mounted on a Stainless Steel Stand. Serial # 3315.

Stock# 53346004

Used- Urschel Comitrol 1700 Processor with Brake. Driven by a 40 HP Motor. Mounted on a Stainless Steel Stand. Serial # 3316.

Stock# 53346005

Used- Urschel Comitrol 1700 Processor with Brake. Driven by a 40 HP Motor. Mounted on a Stainless Steel Stand. Serial # 3317.

Stock# 53346006

Used- Urschel Comitrol 1700 Processor with Brake. Driven by a 40 HP Motor. Mounted on a Stainless Steel Stand. Serial # 3318.

Stock# 53346007

Used- Urschel Comitrol 1700 Processor with Brake. Driven by a 40 HP Motor. Mounted on a Stainless Steel Stand. Serial # 3319.

Stock# 53346008

Used- Urschel Comitrol 1700 Processor with Brake. Driven by a 40 HP Motor. Mounted on a Stainless Steel Stand. Serial # 3320.

Stock# 52834002

Used- Urschel Slicer, Model 2100. Stainless steel construction. Stainless steel hopper, Approximate 30'' deep with 22'' x 30'' infeed opening. Blunt blade horizontal agitator. Stainless steel bottom feed screw driven by 5 hp motor. Driven by 40 hp, 3/60/230/460 motor.

Stock# 52848023

Used- Urschel Comitrol Spindle Drive Assembly, for a Model 9300, Stainless Steel Construction. 4" diameter x 4" long.