hit counter
AARON’S FAMILY OF COMPANIES

Your Files Are Being Processed

70% Complete

Please Wait

Used Progressive Cavity and Used Moyno Pumps

6 Progressive Cavity & Moyno Pumps

Enter to Search

Used- Stainless Steel Blackmer Pump, Model C121-CVT

Stock# 40037489

Used- Blackmer Pump, Model C121-CVT, stainless steel. 2 1/2'' inlet/outlet. Driven by a 7.5 hp, 3/60/230/460 volt, 1760 rpm gearmotor. Base mounted. Built 2001.

Used- Bornemann Progressive Cavity Pump, Model EP 280.3

Stock# 43567001

Used- Bornemann Progressive Cavity Pump, Model EP 280.3. Approximate capacity 4.5 to 7.2 cubic meters an hour (19.8 to 31.7 gallons per minute). Approximately 48 long stator. 5 Inlet, 1-1/4 outlet. Driven by a 13.5 kw (18 hp), 3/50/500 volt, 1455 rpm variable speed motor. Base mounted.

Moyno Sanitary Progressive Cavity Pump, Model Frame FB2A, Type SSE, Trim 3SXA. Approximately 10 gal...

Stock# 46192006

Used- Moyno Sanitary Progressive Cavity Pump, Model Frame FB2A, Type SSE, Trim 3SXA. Approximately 10 gallons per minute. (2) Stages, stainless steel suction housing, Nitrile rubber stator. 1-1/2" Tri-clamp inlet, outlet. Driven by a 1.5 hp, 3/60/208-230/460 volt, 1725 rpm gear motor. Serial #M03073365MW.

Used- Moyno Sanitary Processing Cavity Pump, Model Frame FA4B, Type SSB3, Trim FAA

Stock# 44925002

Used- Moyno Sanitary Progressive Cavity Pump, Model Frame FA4B, Type SSB3, Trim FAA. Approximately 10 gallons per minute. (4) Stages, 304 stainless steel suction housing, EPDM stator. 1-1/2" Tri-clamp inlet, outlet. Driven by a 5 hp, 3/60/230/460 volt, 1750 rpm gear motor, ratio 2.2 to 1. Mounted on a carbon steel base.

Osmonics Tonkaflo Pump, Model SS5522E, 316 Stainless Steel. Flow rate 55 gallons per minute, boost ...

Stock# 46444019

Used- Osmonics Tonkaflo Pump, Model SS5522E, 316 Stainless Steel. Flow rate 55 gallons per minute, boost rate 486 psi. Maximum inlet pressure 200 psi, maximum discharge pressure 750 psi, maximum liquid temperature 125 degrees F. Driven by a 25hp, 3/60/230/460 volt, 3525 rpm motor. Mounted on a carbon steel frame.

Used- Netzsch NESP Series Progressive Cavity Pump, Model 2NESP60A.

Stock# 48243006

Used- Netzsch NESP Series Progressive Cavity Pump, Model 2NESP60A. Approximate 14-1/2" x 14-1/2" open throat suction with (1) 4-1/2" diameter 316 stainless steel feeding screw and (1) 7" diameter carbon steel bridge breaker, 4" outlet. Pump driven by a 7-1/2hp, 3/60/230/460 volt, 1760 rpm gear motor with 11.71:1 ratio, breaker d more info...

Used- Stainless Steel Blackmer Pump, Model C121-CVT

Used- Stainless Steel Blackmer Pump, Model C121-CVT

Stock# 40037489

Used- Blackmer Pump, Model C121-CVT, stainless steel. 2 1/2'' inlet/outlet. Driven by a 7.5 hp, 3/60/230/460 volt, 1760 rpm gearmotor. Base mounted. Built 2001.

Dia (in): 1 Material: Stainless Steel Mfr: Blackmer Model: C121-CVT
VIEW ITEM ADD TO CART

Used- Bornemann Progressive Cavity Pump, Model EP 280.3

Used- Bornemann Progressive Cavity Pump, Model EP 280.3

Stock# 43567001

Used- Bornemann Progressive Cavity Pump, Model EP 280.3. Approximate capacity 4.5 to 7.2 cubic meters an hour (19.8 to 31.7 gallons per minute). Approximately 48 long stator. 5 Inlet, 1-1/4 outlet. Driven by a 13.5 kw (18 hp), 3/50/500 volt, 1455 rpm variable speed motor. Base mounted.

Dia (in): 1 Material: Mfr: Bornemann Model: EP 280.3
VIEW ITEM ADD TO CART

Moyno Sanitary Progressive Cavity Pump, Model Frame FB2A, Type SSE, Trim 3SXA. Approximately 10 gal...

 Moyno Sanitary Progressive Cavity Pump, Model Frame FB2A, Type SSE, Trim 3SXA. Approximately 10 gal...

Stock# 46192006

Used- Moyno Sanitary Progressive Cavity Pump, Model Frame FB2A, Type SSE, Trim 3SXA. Approximately 10 gallons per minute. (2) Stages, stainless steel suction housing, Nitrile rubber stator. 1-1/2" Tri-clamp inlet, outlet. Driven by a 1.5 hp, 3/60/208-230/460 volt, 1725 rpm gear motor. Serial #M03073365MW.

Dia (in): 1 Material: 304SS Mfr: Moyno Model: FB2A
VIEW ITEM ADD TO CART

Used- Moyno Sanitary Processing Cavity Pump, Model Frame FA4B, Type SSB3, Trim FAA

Used- Moyno Sanitary Processing Cavity Pump, Model Frame FA4B, Type SSB3, Trim FAA

Stock# 44925002

Used- Moyno Sanitary Progressive Cavity Pump, Model Frame FA4B, Type SSB3, Trim FAA. Approximately 10 gallons per minute. (4) Stages, 304 stainless steel suction housing, EPDM stator. 1-1/2" Tri-clamp inlet, outlet. Driven by a 5 hp, 3/60/230/460 volt, 1750 rpm gear motor, ratio 2.2 to 1. Mounted on a carbon steel base.

Dia (in): 2 Material: 304SS Mfr: Moyno Model: FA4B SSB3 FAA
VIEW ITEM ADD TO CART

Osmonics Tonkaflo Pump, Model SS5522E, 316 Stainless Steel. Flow rate 55 gallons per minute, boost ...

 Osmonics Tonkaflo Pump, Model SS5522E, 316 Stainless Steel. Flow rate 55 gallons per minute, boost ...

Stock# 46444019

Used- Osmonics Tonkaflo Pump, Model SS5522E, 316 Stainless Steel. Flow rate 55 gallons per minute, boost rate 486 psi. Maximum inlet pressure 200 psi, maximum discharge pressure 750 psi, maximum liquid temperature 125 degrees F. Driven by a 25hp, 3/60/230/460 volt, 3525 rpm motor. Mounted on a carbon steel frame.

Dia (in): 4 Material: 316SS Mfr: Tonkaflo Model: SS5522E
VIEW ITEM ADD TO CART

Used- Netzsch NESP Series Progressive Cavity Pump, Model 2NESP60A.

Used- Netzsch NESP Series Progressive Cavity Pump, Model 2NESP60A.

Stock# 48243006

Used- Netzsch NESP Series Progressive Cavity Pump, Model 2NESP60A. Approximate 14-1/2" x 14-1/2" open throat suction with (1) 4-1/2" diameter 316 stainless steel feeding screw and (1) 7" diameter carbon steel bridge breaker, 4" outlet. Pump driven by a 7-1/2hp, 3/60/230/460 volt, 1760 rpm gear motor with 11.71:1 ratio, breaker driven by a 2.2 kw, 3/60/230/460 volt, 1705 rpm gear motor with 20.03:1 ratio. Mounted on a carbon steel base. Serial# 286878. Built 2000.

Dia (in): 4 Material: CS Mfr: Netzsch Model: 2NESP60A
VIEW ITEM ADD TO CART
  • Used- Stainless Steel Blackmer Pump, Model C121-CVT

    Used- Blackmer Pump, Model C121-CVT, stainless steel. 2 1/2'' inlet/outlet. Driven by a 7.5 hp, 3/60/230/460 volt, 1760 rpm gearmotor. Base mounted. Built 2001.

    VIEW ITEM Add to Cart
  • Used- Bornemann Progressive Cavity Pump, Model EP 280.3

    Used- Bornemann Progressive Cavity Pump, Model EP 280.3. Approximate capacity 4.5 to 7.2 cubic meters an hour (19.8 to 31.7 gallons per minute). Approximately 48 long stator. 5 Inlet, 1-1/4 outlet. Driven by a 13.5 kw (18 hp), 3/50/500 volt, 1455 rpm variable speed motor. Base mounted.

    VIEW ITEM Add to Cart
  • Moyno Sanitary Progressive Cavity Pump, Model Frame FB2A, Type SSE, Trim 3SXA. Approximately 10 gal...

    Used- Moyno Sanitary Progressive Cavity Pump, Model Frame FB2A, Type SSE, Trim 3SXA. Approximately 10 gallons per minute. (2) Stages, stainless steel suction housing, Nitrile rubber stator. 1-1/2" Tri-clamp inlet, outlet. Driven by a 1.5 hp, 3/60/208-230/460 volt, 1725 rpm gear motor. Serial #M03073365MW.

    VIEW ITEM Add to Cart
  • Used- Moyno Sanitary Processing Cavity Pump, Model Frame FA4B, Type SSB3, Trim FAA

    Used- Moyno Sanitary Progressive Cavity Pump, Model Frame FA4B, Type SSB3, Trim FAA. Approximately 10 gallons per minute. (4) Stages, 304 stainless steel suction housing, EPDM stator. 1-1/2" Tri-clamp inlet, outlet. Driven by a 5 hp, 3/60/230/460 volt, 1750 rpm gear motor, ratio 2.2 to 1. Mounted on a carbon steel base.

    VIEW ITEM Add to Cart
  • Osmonics Tonkaflo Pump, Model SS5522E, 316 Stainless Steel. Flow rate 55 gallons per minute, boost ...

    Used- Osmonics Tonkaflo Pump, Model SS5522E, 316 Stainless Steel. Flow rate 55 gallons per minute, boost rate 486 psi. Maximum inlet pressure 200 psi, maximum discharge pressure 750 psi, maximum liquid temperature 125 degrees F. Driven by a 25hp, 3/60/230/460 volt, 3525 rpm motor. Mounted on a carbon steel frame.

    VIEW ITEM Add to Cart
  • Used- Netzsch NESP Series Progressive Cavity Pump, Model 2NESP60A.

    Used- Netzsch NESP Series Progressive Cavity Pump, Model 2NESP60A. Approximate 14-1/2" x 14-1/2" open throat suction with (1) 4-1/2" diameter 316 stainless steel feeding screw and (1) 7" diameter carbon steel bridge breaker, 4" outlet. Pump driven by a 7-1/2hp, 3/60/230/460 volt, 1760 rpm gear motor with 11.71:1 ratio, breaker driven by a 2.2 kw, 3/60/230/460 volt, 1705 rpm gear motor with 20.03:1 ratio. Mounted on a carbon steel base. Serial# 286878. Built 2000.

    VIEW ITEM Add to Cart
Cash Icon
Surplus Equipment?

We pay "Top Dollar" for your idle process equipment! Fill out our form and our buying team will get back to you.

SELL YOUR EQUIPMENT
Search Icon
Browse Inventory

View our entire process equipment inventory online or visit our location for an equipment inspection.

View Inventory
Phone Icon
Contact Us

Email or call us to speak with an equipment specialist to answer any machinery questions you may have.

630-350-2200