We Buy and Sell Process and Packaging Equipment: 630-350-2200

Welcome to Aaron Equipment. Would you like to  |  |

Other Plastics Equipment Categories

View Plastics Equipment By Manufacturer

Sell Us Your
Equipment

If you have Equipment like this for sale, we want to know about it. We Pay TOP DOLLAR for your unwanted equipment.

BUY USED PIPE PROFILE EXTRUSION LINES FROM AARON EQUIPMENT

14 Items

Below is Aaron's inventory of unused and used pipe profile extrusion lines. If you are looking to sell your used pipe profile extrusion line submit a request online or contact Erik Eichert at 630-238-7480.

Most Viewed Items

Stock #42905017Stock #45097001Stock #42905019Stock #42905020
Used- Widos Polypress 18" PVC Pipe Welder; with Widos Control, 18" Max. 1 Pipe Size, 240V (...) Used- Pipe Extrusion Line For Corrugated PVC Drainage Pipe Consisting Of: (1) Theysohn ap (...) Used- Widos Ploypress 4002 PVC Pipe Welder; with Widos & Warner 1 Electric Linear Autuato (...) Used- Lycro Products Semiautomatic PVC Pipe Socket Forming Machine; 2-Station, 18" - 27" (...)
14 Items
Page View: Sort By:

10151182

Used- Bausano Twin Screw PVC Pipe Line consisting of: 52mm Bausano 24/1 L/D parallel extruder with electically heated air cooled barrel. Extruder model MD2/52/23-A, (new 2002), serial #202BG008.017. Includes starve feeder as well as standard gravity feed hopper, 8.7 kw AC motor to each screw including abb variable frequency drive. Inlcudes water cooled feed throat, vented barrel with vacuum pump, and pendant mounted operator control panel. 3" O.D. pipe die, 100" long vacuum calibration tank including vacuum pumps and water pumps with 2.75" O.D. tooling. 48" x approximately 6" wide cleated belt puller model MLT/75, serial #202BG008.017. Air cyclinder actuated traveling cut off saw and dump table. Line new 2002 with extremely limited use. more info...

  • Compare
  • |
  • Width (in):
  • |
  • Len (in):
  • |
  • Mfr: Bausano
  • |
  • Model: Model MD2/52/23-A
  • |

25434022

Major components to Profile Line Consisting of 87249 Used- Plasti Program 1.3" Single Screw Extruder, Model RS35, Approximately 24:1 L/D Ratio. Electrically heated, air cooled 3 zone non-vented barrel. Water cooled feed with hopper, approximately 41" centerline height. Driven by a 10 HP, 500 Volt DC motor with gearbox. Control panel with Watlow controllers. 87250 Used- Merritt Davis 1 1/2" Single Screw Extruder, approximatly 24:1 L/D ratio. Electrically heated, air cooled 3 zone non-vented barrel. Water cooled feed with hopper, approximately 42" centerline height. Driven by a 15 hp, 3/60/380/460 volt, 1755 rpm motor with gearbox, ratio 14:1. Control panel with Barber Coleman controllers and an Altivar panel. 87251 Used- Plasti Program 1.3" Single Screw Extruder, model RS35, approximately 24:1 L/D ratio. Electrically heated, air cooled 3 zone non-vented barrel. Water cooled feed with hopper, approximately 41" centerline height. Driven by a 10 hp, 500 volt DC motor with gearbox. Control panel with Watlow controllers and a Baldor DC drive. Built 1988. 87252 Used- Plasti Program 1.9" Single Screw Extruder, model RS50, approximately 24:1 L/D ratio. Electrically heated, air cooled 3 zone non-vented barrel. Water cooled feed with hopper, approximately 41" centerline height. Driven by a 20 hp, 500 volt DC motor with gearbox. Control panel with Watlow controllers. more info...

  • Compare
  • |
  • Width (in):
  • |
  • Len (in):
  • |
  • Mfr: No
  • |
  • Model:
  • |

42995020

Used- Pipe Extrusion Line for 4.92" (125 mm) PE pipes. Comprising of: Weber NE 9 and NE 7 extruder, built 2005. (2) Mcguire feeders. Motan weigher. Kreyenborg LK-SWF-290 screen changer. UC 100 die head. (3) Dies for 3.54" (90 mm), 4.33" (110 mm), 4.92" (125 mm) pipes. Unicor UC 100/90 iV corrugator, for (90) form tools. (3) Sets of form tools for 2.95"/3.54" ( 75/90 mm), 3.70"/4.33" (94/110 mm), 4.25"/4.92" (108/125 mm) pipes. Sica P200-2 saw. Suca TRK/D/SY/25-160 puller. Maintools spray bath. Unicor tilting table. Mecasoft ED10BXR winder. more info...

  • Compare
  • |
  • Width (in):
  • |
  • Len (in):
  • |
  • Mfr: Weber
  • |
  • Model:
  • |

44670002

Used-Berstorff 90/2-E Core Insulation Line for production of HDPE tubes (4 mm) outside diameter. Screw diameter 60 mm. Screw length 25D. (5) Heating zones. Motor 32 kW. 380/50V. more info...

  • Compare
  • |
  • Width (in):
  • |
  • Len (in):
  • |
  • Mfr: Berstorff
  • |
  • Model: 90/2-E
  • |

45043003

Used-Extrusion Plant consisting of three extrusion lines: a) Bausano Extruder, built 1987, Model 87-115-MDS-20VK3B156B. Pipes 3.54" - 7.87" (90 to 200 mm). b) Bausano Extruder built 2006, Model 11 D 90/25. Pipes 4.33" - 9.84" (110 to 250 mm). c) Bandera Extruder, built 1992, Model 2 B65HT. Pipes 0.79" - 5.9" (20 to 150 mm). Also including a Plasmec Mixer, Model TRM 350, built 1992, as well as a lab, compressor, recycling, and water cooling. more info...

  • Compare
  • |
  • Width (in):
  • |
  • Len (in):
  • |
  • Mfr: Bausano
  • |
  • Model:
  • |

45097001

Used- Pipe Extrusion Line For Corrugated PVC Drainage Pipe Consisting Of: (1) Theysohn approximate 88mm counter rotating twin screw extruder, model Par 88. Approximate 24 to 1 L/D ratio. Electrically heated, liquid cooled 5 zone top venter barrel. Water cooled feed throat with dosing feeder, and hopper, approximate 53" center line height. Driven by a 42kw, 450 volt, 1750 rpm motor thru a Eisenbeiss gear box, ratio 43.8 to 1. Includes an operator control panel with temperature controllers, (1) Corma corrugator, type 420 HS. (2) Trains of traveling mold blocks with a Corma cooling system. (1) Fränkische puncher for drainage pipes, type HLV 50/160 including (4) alteration set for puncher (50mm, 65mm, 80mm, 100mm); (1) TM K.G. Viersen-Dülken winder for up to 4.9" (125 mm) diameter pipe, type HW 2300 0, including control panel. Available with line 50mm, 65 mm, 80 mm, and 100mm tooling for different diameters of piping. more info...

  • Compare
  • |
  • Width (in): 3.9
  • |
  • Len (in): Corrugator Line
  • |
  • Mfr: Corma
  • |
  • Model: Par 88
  • |

13896012

Used- Pipe Extrusion Line, 1.57“ – 4.3“ (40 – 110 mm) diameter. Capacity up to 440 lbs/hour (200kg/h), installed power 160 HP (120kW), 50Hz. Material handled: HDPE,PE80, PE100. Comprised of: (1) extruder “ (90 mm), (1) Die head, (1) Cooling bath/calibration, (1) Cooling bath, (1) Printer, (1) Puller, (1) Winder, (1) Electrical control panel. more info...

  • Compare
  • |
  • Width (in): 4.3
  • |
  • Len (in):
  • |
  • Mfr: Desislava
  • |
  • Model:
  • |

46065001

Unused- Schnallinger Belling Machine MA 160/4/2 ATS NR. Diameter 2" - 6.3" (50 - 160mm) pipes. Tools: DN 4.3" x 0.2" (110 x 3.4mm) complete; DN 3" x 0.1" (75 x 2.6mm) (no interior heating, spacers missing); DN 2" x 0.1" (50 x 2.0mm) (no interior heating, spacers missing). Built 2010 more info...

  • Compare
  • |
  • Width (in): 6.3
  • |
  • Len (in):
  • |
  • Mfr: Schnallinger
  • |
  • Model: MA 160/4/2 ATS NR
  • |

46065002

Used- Schnallinger Belling Machine MA 160/4/2/2. Diameter 2" - 6.3" (50 - 160mm) pipes. Individually adjustable forming stations (left and right). Built 2005. more info...

  • Compare
  • |
  • Width (in): 6.3
  • |
  • Len (in):
  • |
  • Mfr: Schnallinger
  • |
  • Model: MA 160/4/2/2
  • |

42995019

Used- Pipe Extrusion Line for 9.84" (250 mm) PE pipes. Comprising of: Extrudex HB 80-36 D + HB 60-30 D extruder. (2) Motan feeders. Gravicolor weigher. UC 250 die head. Wire unwinder. (5) Dies for 4.33" (110 mm), 4.72" (120 mm), 6.3" (160 mm), 6.89" (175 mm), 7.87" (200 mm) pipes. Unicor UC 250/48 iV corrugator, for (48) form tools, capacity 1,212-1,653 lbs/hour (550-750 kg/h) of PE-HD, speed 59'/min (18 m/min). (5) Sets of form tools for 4.33" (110 mm), 4.72" (120 mm), 6.3" (160 mm), 6.89" (175 mm), 7.87" (200 mm) pipes. Unicor spray bath. Blake saw. Unicor UCA-250 cutter. Unicor winder. Unicor tilting table. more info...

  • Compare
  • |
  • Width (in): 9.84
  • |
  • Len (in):
  • |
  • Mfr: Extrudex
  • |
  • Model:
  • |

42905019

Used- Widos Ploypress 4002 PVC Pipe Welder; with Widos & Warner 1 Electric Linear Autuator Controls, 10" Max. Pipe Size, 240V, 60hz. more info...

  • Compare
  • |
  • Width (in): 10
  • |
  • Len (in):
  • |
  • Mfr: Widos
  • |
  • Model: 4002
  • |

42905021

Used- Lycro Products Semi-automatic PVC Pipe Socket Forming Machine; 2- Station, 8" - 15" Max. Pipe Dia., Hydraulically Actuated Tooling, 480V,60hz. more info...

  • Compare
  • |
  • Width (in): 15
  • |
  • Len (in):
  • |
  • Mfr: Lycro
  • |
  • Model:
  • |

42905017

Used- Widos Polypress 18" PVC Pipe Welder; with Widos Control, 18" Max. 1 Pipe Size, 240V, 60hz. Has tooling for 12" pipe. more info...

  • Compare
  • |
  • Width (in): 18
  • |
  • Len (in):
  • |
  • Mfr: Widos
  • |
  • Model:
  • |

42905020

Used- Lycro Products Semiautomatic PVC Pipe Socket Forming Machine; 2-Station, 18" - 27" Max. Pipe Diameter Hydraulically Actuated Tooling, 480V,60hz more info...

  • Compare
  • |
  • Width (in): 27
  • |
  • Len (in):
  • |
  • Mfr: Lycro
  • |
  • Model:
  • |