hit counter
AARON’S FAMILY OF COMPANIES

Your Files Are Being Processed

70% Complete

Please Wait

Used Hopper Blending Feeding Equipment

13 Hopper Blending Feeding Equipment

Enter to Search

Used- Dynamic Air Blender System

Stock# 43793028

Used- Dynamic Air Blender System, Consisting Of: Operator control panel, compressed air tank, and an aluminum silo, approximate 56” diameter x 144” overall height. Last used for blending pellets post classification in pelletizing line, and depositing blended pellets into a Gaylord box.

Maguire 4 Material Gravimetric Blender, Model WSB 440. Rated up to 1400 lbs/hr. 4-2" x 3" Slide G...

Stock# 46416002

Used- Maguire 4 Material Gravimetric Blender, Model WSB 440. Rated up to 1400 lbs/hr. 4-2" x 3" Slide Gate

Used- Stainless Steel Isomatic Corp. Agitated Fluff Bin

Stock# 44496004

Used- Isomatic Corp. Agitated Fluff Bin, Approximately 200 Cubic Feet, 304 Stainless Steel. Non-jacketed trough approximately 74" long x 74" wide x 133" deep. Single shaft with interrupted ribbons, driven by a 5 hp, 3/60/230/460 volt, 1750 rpm motor thru a SM-Cyclo reducer, ratio 649 to 1. Open top, no cover, dual bottom dischar more info...

Used- Carbon Steel Agitated Hopper/Feeder,

Stock# 43400003

Used- Agitated Hopper/Feeder, Carbon Steel. Approximate 58" diameter x 17" straight side x 56" coned bottom. Bolt on top cover with a 1/3 hinged door, 304 Stainless steel mixing blade, driven by a 1/2 hp, 3/60/208-230/460 volt, 1725 rpm gear motor, ratio 246.37 to 1. Approximate 36" long x 36" wide mounting pad with a 22" diamet more info...

Novatech 3 Component Blending System, Model MCS-206, Consisting Of: (1) Novatec pneumatic pump, mod...

Stock# 43752066

Used- Novatech 3 Component Blending System, Model MCS-206, Consisting Of: (1) Novatec pneumatic pump, model UPU, driven by a 3hp motor with filter, and multi-station panel, serial# 12-343-0842. Includes receivers, and controls, serial# 12-243-0177. Last used with a 2.5" extrusion line.

Used- Conair 3 component blender, model MCMX3

Stock# 10755066

Used- Conair 3 component blender model MCMX3, 3 component volumetric blender, 115 volts, each bin is 14" x 14" x 18", straight side with 13" 45 degree cone, site glass, material level sensors, and manual slide gates on each bin, auger sizes are 3/4", 1/5" and 2", approximately 1000 lbs/hr total capacity

Used- Conair 3 component blender, model MCMX3

Stock# 10755067

Used- Conair 3 component blender model MCMX3, 3 component volumetric blender, 115 volts, each bin is 14" x 14" x 18", straight side with 13" 45 degree cone, site glass, material level sensors, and manual slide gates on each bin, auger sizes are 3/4", 1/5" and 2", approximately 1000 lbs/hr total capacity

Brabender Loss-In-Weight (3) Component Feeding System. Consisting of (1) Brabender Screw feeder, mo...

Stock# 47872008

Used- Brabender Loss-In-Weight (3) Component Feeding System. Consisting of (1) Brabender Screw feeder, model DDW-H33 (Missing hopper), (2) vibratory tray feeders, (3) weigh belt feeders, model 350G. Includes control panel.

Used- Walton Stout 4 Componant Blending System, Model D-01A, Carbon Steel.

Stock# 48907006

Used- Walton Stout 4 Componant Volumetric Blending System, Model D-01A, Carbon Steel. Consisting of (4) top mounted compartments(hoppers), (4) vibratory feeders, (1) blending chamber, driven by a 1hp, 3/60/208-230/460 volt, 1725 rpm motor. Includes control panel. Mounted on a painted carbon steel frame. Serial# 6041-A1E, built 1 more info...

Used- Carbon Steel Pacific Engineering 4 Compartment Weigh Scale Blender, Model MBWB-IV

Stock# 44532004

Used- Pacific Engineering 4 Compartment Weigh Scale Blender, Model MBWB-IV, Carbon Steel. Consists of: (4) Top mounted compartments, (2) model C-20 vacuum chambers, (2) model C-6 vacuum chambers, (4) vibratory conveyors, (2) scale hoppers, (1) diverter valve, (2) discharge bins, and a control panel with scale controllers. Approx more info...

Colortronic 6 Component Gravimetric Slide Gate Blender, Model CSG-900-6R. Consisting of (5) color b...

Stock# 46133003

Used- Colortronic 6 Component Gravimetric Slide Gate Blender, Model CSG-900-6R. Consisting of (5) color bin and (1) color additive feeder. Capable of maximum blending rate of 900 pounds per hour. Each color bin has pneumatic slide gate, color additive bin is feed by 2" diameter x approximately 20" long screw, driven by 1/15 hp m more info...

Used- Carbon Steel Pacific Engineering 6 Compartment Weigh Scale Blender, Model MBWB-VI

Stock# 44532002

Used- Pacific Engineering 6 Compartment Weigh Scale Blender, Model MBWB-VI, Carbon Steel. Consists of: (6) Top mounted compartments; (4) model C-20 vacuum chambers; (1) model C-6 vacuum chamber; (1) model C-6 vacuum chamber with a Bunting Magnetics metal detector, model HS-9100, serial #020321; (5) vibratory conveyors, (1) missi more info...

Used- Carbon Steel Pacific Engineering 6 Compartment Weigh Scale Blender, Model MBWB-VI

Stock# 44532003

Used- Pacific Engineering 6 Compartment Weigh Scale Blender, Model MBWB-VI, Carbon Steel. Consists of: (6) Top mounted compartments, (4) model C-20 vacuum chambers, (2) model C-6 vacuum chambers, (6) vibratory conveyors, (2) scale hoppers, (2) discharge bins, and a control panel with scale controllers. Approximate install heigh more info...

Used- Dynamic Air Blender System

Used- Dynamic Air Blender System

Stock# 43793028

Used- Dynamic Air Blender System, Consisting Of: Operator control panel, compressed air tank, and an aluminum silo, approximate 56” diameter x 144” overall height. Last used for blending pellets post classification in pelletizing line, and depositing blended pellets into a Gaylord box.

Stations: Mfr: Dynamic Air HP: Model:
VIEW ITEM ADD TO CART

Maguire 4 Material Gravimetric Blender, Model WSB 440. Rated up to 1400 lbs/hr. 4-2" x 3" Slide G...

 Maguire 4 Material Gravimetric Blender, Model WSB 440.  Rated up to 1400 lbs/hr.  4-2" x 3" Slide G...

Stock# 46416002

Used- Maguire 4 Material Gravimetric Blender, Model WSB 440. Rated up to 1400 lbs/hr. 4-2" x 3" Slide Gate

Stations: Mfr: Maguire HP: Model: WSB 440
VIEW ITEM ADD TO CART

Used- Stainless Steel Isomatic Corp. Agitated Fluff Bin

Used- Stainless Steel Isomatic Corp. Agitated Fluff Bin

Stock# 44496004

Used- Isomatic Corp. Agitated Fluff Bin, Approximately 200 Cubic Feet, 304 Stainless Steel. Non-jacketed trough approximately 74" long x 74" wide x 133" deep. Single shaft with interrupted ribbons, driven by a 5 hp, 3/60/230/460 volt, 1750 rpm motor thru a SM-Cyclo reducer, ratio 649 to 1. Open top, no cover, dual bottom discharge openings each with a take-away / feeder screw conveyor. Previously used for accumulation of material prior to feeding into a pellet mill.

Stations: 1 Mfr: No HP: 5 Model:
VIEW ITEM ADD TO CART

Used- Carbon Steel Agitated Hopper/Feeder,

Used- Carbon Steel Agitated Hopper/Feeder,

Stock# 43400003

Used- Agitated Hopper/Feeder, Carbon Steel. Approximate 58" diameter x 17" straight side x 56" coned bottom. Bolt on top cover with a 1/3 hinged door, 304 Stainless steel mixing blade, driven by a 1/2 hp, 3/60/208-230/460 volt, 1725 rpm gear motor, ratio 246.37 to 1. Approximate 36" long x 36" wide mounting pad with a 22" diameter opening. Includes a Premier Pneumatics Mini-Filter.

Stations: 1 Mfr: HP: .5 Model:
VIEW ITEM ADD TO CART

Novatech 3 Component Blending System, Model MCS-206, Consisting Of: (1) Novatec pneumatic pump, mod...

 Novatech 3 Component Blending System, Model MCS-206, Consisting Of: (1) Novatec pneumatic pump, mod...

Stock# 43752066

Used- Novatech 3 Component Blending System, Model MCS-206, Consisting Of: (1) Novatec pneumatic pump, model UPU, driven by a 3hp motor with filter, and multi-station panel, serial# 12-343-0842. Includes receivers, and controls, serial# 12-243-0177. Last used with a 2.5" extrusion line.

Stations: 3 Mfr: Novatec HP: 3 Model: MCS-206
VIEW ITEM ADD TO CART

Used- Conair 3 component blender, model MCMX3

Used- Conair 3 component blender, model MCMX3

Stock# 10755066

Used- Conair 3 component blender model MCMX3, 3 component volumetric blender, 115 volts, each bin is 14" x 14" x 18", straight side with 13" 45 degree cone, site glass, material level sensors, and manual slide gates on each bin, auger sizes are 3/4", 1/5" and 2", approximately 1000 lbs/hr total capacity

Stations: 3 Mfr: Conair HP: Model: MCMX#
VIEW ITEM ADD TO CART

Used- Conair 3 component blender, model MCMX3

Used- Conair 3 component blender, model MCMX3

Stock# 10755067

Used- Conair 3 component blender model MCMX3, 3 component volumetric blender, 115 volts, each bin is 14" x 14" x 18", straight side with 13" 45 degree cone, site glass, material level sensors, and manual slide gates on each bin, auger sizes are 3/4", 1/5" and 2", approximately 1000 lbs/hr total capacity

Stations: 3 Mfr: Conair HP: Model: MCMX3
VIEW ITEM ADD TO CART

Brabender Loss-In-Weight (3) Component Feeding System. Consisting of (1) Brabender Screw feeder, mo...

 Brabender Loss-In-Weight (3) Component Feeding System. Consisting of (1) Brabender Screw feeder, mo...

Stock# 47872008

Used- Brabender Loss-In-Weight (3) Component Feeding System. Consisting of (1) Brabender Screw feeder, model DDW-H33 (Missing hopper), (2) vibratory tray feeders, (3) weigh belt feeders, model 350G. Includes control panel.

Stations: 3 Mfr: Brabender HP: Model:
VIEW ITEM ADD TO CART

Used- Walton Stout 4 Componant Blending System, Model D-01A, Carbon Steel.

Used- Walton Stout 4 Componant Blending System, Model D-01A, Carbon Steel.

Stock# 48907006

Used- Walton Stout 4 Componant Volumetric Blending System, Model D-01A, Carbon Steel. Consisting of (4) top mounted compartments(hoppers), (4) vibratory feeders, (1) blending chamber, driven by a 1hp, 3/60/208-230/460 volt, 1725 rpm motor. Includes control panel. Mounted on a painted carbon steel frame. Serial# 6041-A1E, built 1994. (HOPPERS MISSING TOP COVERS)

Stations: 4 Mfr: Walton Stout HP: 1 Model: D-01A
VIEW ITEM ADD TO CART

Used- Carbon Steel Pacific Engineering 4 Compartment Weigh Scale Blender, Model MBWB-IV

Used- Carbon Steel Pacific Engineering 4 Compartment Weigh Scale Blender, Model MBWB-IV

Stock# 44532004

Used- Pacific Engineering 4 Compartment Weigh Scale Blender, Model MBWB-IV, Carbon Steel. Consists of: (4) Top mounted compartments, (2) model C-20 vacuum chambers, (2) model C-6 vacuum chambers, (4) vibratory conveyors, (2) scale hoppers, (1) diverter valve, (2) discharge bins, and a control panel with scale controllers. Approximate install height 18”. Built 1987.

Stations: 4 Mfr: Pacific Eng. HP: Model: MBWB-IV
VIEW ITEM ADD TO CART

Colortronic 6 Component Gravimetric Slide Gate Blender, Model CSG-900-6R. Consisting of (5) color b...

 Colortronic 6 Component Gravimetric Slide Gate Blender, Model CSG-900-6R. Consisting of (5) color b...

Stock# 46133003

Used- Colortronic 6 Component Gravimetric Slide Gate Blender, Model CSG-900-6R. Consisting of (5) color bin and (1) color additive feeder. Capable of maximum blending rate of 900 pounds per hour. Each color bin has pneumatic slide gate, color additive bin is feed by 2" diameter x approximately 20" long screw, driven by 1/15 hp motor. Has stainless steel weigh hopper, mixer agitator with 13" diameter blade, driven by 1/6 hp motor. Includes control panel with Mitsubishi PLC. Mounted on carbon steel base with wheel and track system. Serial #37K0721.

Stations: 6 Mfr: Colortronic HP: 1/6 HP Model: CSG-900-6R
VIEW ITEM ADD TO CART

Used- Carbon Steel Pacific Engineering 6 Compartment Weigh Scale Blender, Model MBWB-VI

Used- Carbon Steel Pacific Engineering 6 Compartment Weigh Scale Blender, Model MBWB-VI

Stock# 44532002

Used- Pacific Engineering 6 Compartment Weigh Scale Blender, Model MBWB-VI, Carbon Steel. Consists of: (6) Top mounted compartments; (4) model C-20 vacuum chambers; (1) model C-6 vacuum chamber; (1) model C-6 vacuum chamber with a Bunting Magnetics metal detector, model HS-9100, serial #020321; (5) vibratory conveyors, (1) missing; (2) scale hoppers; (1) diverter valve; (2) discharge bins, and a control panel with scale controllers. Approximate install height 18". Built 1988.

Stations: 6 Mfr: Pacific Eng. HP: Model: MBWB-VI
VIEW ITEM ADD TO CART

Used- Carbon Steel Pacific Engineering 6 Compartment Weigh Scale Blender, Model MBWB-VI

Used- Carbon Steel Pacific Engineering 6 Compartment Weigh Scale Blender, Model MBWB-VI

Stock# 44532003

Used- Pacific Engineering 6 Compartment Weigh Scale Blender, Model MBWB-VI, Carbon Steel. Consists of: (6) Top mounted compartments, (4) model C-20 vacuum chambers, (2) model C-6 vacuum chambers, (6) vibratory conveyors, (2) scale hoppers, (2) discharge bins, and a control panel with scale controllers. Approximate install height 18 feet. Built 1988.

Stations: 6 Mfr: Pacific Eng. HP: Model: MBWB-VI
VIEW ITEM ADD TO CART
  • Used- Dynamic Air Blender System

    Used- Dynamic Air Blender System, Consisting Of: Operator control panel, compressed air tank, and an aluminum silo, approximate 56” diameter x 144” overall height. Last used for blending pellets post classification in pelletizing line, and depositing blended pellets into a Gaylord box.

    VIEW ITEM Add to Cart
  • Maguire 4 Material Gravimetric Blender, Model WSB 440. Rated up to 1400 lbs/hr. 4-2" x 3" Slide G...

    Used- Maguire 4 Material Gravimetric Blender, Model WSB 440. Rated up to 1400 lbs/hr. 4-2" x 3" Slide Gate

    VIEW ITEM Add to Cart
  • Used- Stainless Steel Isomatic Corp. Agitated Fluff Bin

    Used- Isomatic Corp. Agitated Fluff Bin, Approximately 200 Cubic Feet, 304 Stainless Steel. Non-jacketed trough approximately 74" long x 74" wide x 133" deep. Single shaft with interrupted ribbons, driven by a 5 hp, 3/60/230/460 volt, 1750 rpm motor thru a SM-Cyclo reducer, ratio 649 to 1. Open top, no cover, dual bottom discharge openings each with a take-away / feeder screw conveyor. Previously used for accumulation of material prior to feeding into a pellet mill.

    VIEW ITEM Add to Cart
  • Used- Carbon Steel Agitated Hopper/Feeder,

    Used- Agitated Hopper/Feeder, Carbon Steel. Approximate 58" diameter x 17" straight side x 56" coned bottom. Bolt on top cover with a 1/3 hinged door, 304 Stainless steel mixing blade, driven by a 1/2 hp, 3/60/208-230/460 volt, 1725 rpm gear motor, ratio 246.37 to 1. Approximate 36" long x 36" wide mounting pad with a 22" diameter opening. Includes a Premier Pneumatics Mini-Filter.

    VIEW ITEM Add to Cart
  • Novatech 3 Component Blending System, Model MCS-206, Consisting Of: (1) Novatec pneumatic pump, mod...

    Used- Novatech 3 Component Blending System, Model MCS-206, Consisting Of: (1) Novatec pneumatic pump, model UPU, driven by a 3hp motor with filter, and multi-station panel, serial# 12-343-0842. Includes receivers, and controls, serial# 12-243-0177. Last used with a 2.5" extrusion line.

    VIEW ITEM Add to Cart
  • Used- Conair 3 component blender, model MCMX3

    Used- Conair 3 component blender model MCMX3, 3 component volumetric blender, 115 volts, each bin is 14" x 14" x 18", straight side with 13" 45 degree cone, site glass, material level sensors, and manual slide gates on each bin, auger sizes are 3/4", 1/5" and 2", approximately 1000 lbs/hr total capacity

    VIEW ITEM Add to Cart
  • Used- Conair 3 component blender, model MCMX3

    Used- Conair 3 component blender model MCMX3, 3 component volumetric blender, 115 volts, each bin is 14" x 14" x 18", straight side with 13" 45 degree cone, site glass, material level sensors, and manual slide gates on each bin, auger sizes are 3/4", 1/5" and 2", approximately 1000 lbs/hr total capacity

    VIEW ITEM Add to Cart
  • Brabender Loss-In-Weight (3) Component Feeding System. Consisting of (1) Brabender Screw feeder, mo...

    Used- Brabender Loss-In-Weight (3) Component Feeding System. Consisting of (1) Brabender Screw feeder, model DDW-H33 (Missing hopper), (2) vibratory tray feeders, (3) weigh belt feeders, model 350G. Includes control panel.

    VIEW ITEM Add to Cart
  • Used- Walton Stout 4 Componant Blending System, Model D-01A, Carbon Steel.

    Used- Walton Stout 4 Componant Volumetric Blending System, Model D-01A, Carbon Steel. Consisting of (4) top mounted compartments(hoppers), (4) vibratory feeders, (1) blending chamber, driven by a 1hp, 3/60/208-230/460 volt, 1725 rpm motor. Includes control panel. Mounted on a painted carbon steel frame. Serial# 6041-A1E, built 1994. (HOPPERS MISSING TOP COVERS)

    VIEW ITEM Add to Cart
  • Used- Carbon Steel Pacific Engineering 4 Compartment Weigh Scale Blender, Model MBWB-IV

    Used- Pacific Engineering 4 Compartment Weigh Scale Blender, Model MBWB-IV, Carbon Steel. Consists of: (4) Top mounted compartments, (2) model C-20 vacuum chambers, (2) model C-6 vacuum chambers, (4) vibratory conveyors, (2) scale hoppers, (1) diverter valve, (2) discharge bins, and a control panel with scale controllers. Approximate install height 18”. Built 1987.

    VIEW ITEM Add to Cart
  • Colortronic 6 Component Gravimetric Slide Gate Blender, Model CSG-900-6R. Consisting of (5) color b...

    Used- Colortronic 6 Component Gravimetric Slide Gate Blender, Model CSG-900-6R. Consisting of (5) color bin and (1) color additive feeder. Capable of maximum blending rate of 900 pounds per hour. Each color bin has pneumatic slide gate, color additive bin is feed by 2" diameter x approximately 20" long screw, driven by 1/15 hp motor. Has stainless steel weigh hopper, mixer agitator with 13" diameter blade, driven by 1/6 hp motor. Includes control panel with Mitsubishi PLC. Mounted on carbon steel base with wheel and track system. Serial #37K0721.

    VIEW ITEM Add to Cart
  • Used- Carbon Steel Pacific Engineering 6 Compartment Weigh Scale Blender, Model MBWB-VI

    Used- Pacific Engineering 6 Compartment Weigh Scale Blender, Model MBWB-VI, Carbon Steel. Consists of: (6) Top mounted compartments; (4) model C-20 vacuum chambers; (1) model C-6 vacuum chamber; (1) model C-6 vacuum chamber with a Bunting Magnetics metal detector, model HS-9100, serial #020321; (5) vibratory conveyors, (1) missing; (2) scale hoppers; (1) diverter valve; (2) discharge bins, and a control panel with scale controllers. Approximate install height 18". Built 1988.

    VIEW ITEM Add to Cart
  • Used- Carbon Steel Pacific Engineering 6 Compartment Weigh Scale Blender, Model MBWB-VI

    Used- Pacific Engineering 6 Compartment Weigh Scale Blender, Model MBWB-VI, Carbon Steel. Consists of: (6) Top mounted compartments, (4) model C-20 vacuum chambers, (2) model C-6 vacuum chambers, (6) vibratory conveyors, (2) scale hoppers, (2) discharge bins, and a control panel with scale controllers. Approximate install height 18 feet. Built 1988.

    VIEW ITEM Add to Cart
Cash Icon
Surplus Equipment?

We pay "Top Dollar" for your idle process equipment! Fill out our form and our buying team will get back to you.

SELL YOUR EQUIPMENT
Search Icon
Browse Inventory

View our entire process equipment inventory online or visit our location for an equipment inspection.

View Inventory
Phone Icon
Contact Us

Email or call us to speak with an equipment specialist to answer any machinery questions you may have.

630-350-2200