hit counter
AARON’S FAMILY OF COMPANIES

Your Files Are Being Processed

70% Complete

Please Wait

Used Sand Mills and Used Media Mills

10 Sand & Media Mills

Enter to Search

Fryma Coball Mill, Model MS-50. High performance annular gap bead mill for sub-micron milling. Capa...

Stock# 11059146

Used- Fryma Coball Mill, Model MS-50. High performance annular gap bead mill for sub-micron milling. Capacity: 4 m3/hr. Capacity size 3 gallon(11.4 liter). Capacity range approximately: 150-1000kg/hr. Product fineness approximately: 30 - <1um.

Netzsch Pilot Horizontal Media Mill, LMZ-05. Unit has stainless steel contact parts, and the rotor ...

Stock# 11690013

Used- Netzsch Pilot Horizontal Media Mill, LMZ-05. Unit has stainless steel contact parts, and the rotor is driven by a 5HP motor. Mill is fully prewired (3/60/230V) with all explosion proof electrics. Mill includes a variable speed feed pump. The volume of the grinding chamber. Mill is approximately 28" x 48" x 76" high, and it more info...

Used- Aimex Ultra Viscomill, Model UVM-5. 5 Liter working capacity (6.5 total)

Stock# 48286003

Used- Aimex Ultra Viscomill, Model UVM-5. 5 Liter working capacity (6.5 total), processing capacity 13 to 80 liters per hour, 4.2 liter bead capacity. Vessel with SUS304 SS rectangular axis, hi-moler disk with pins, zirconia slit. Double mechanical seals on both main axis and slit sides. Driven by a 11Kw (14.75hp) main motor wit more info...

Used- Netzsch Vertical Media John Mill, Model RM-15 GL

Stock# 42598001

Used- Netzsch Vertical Media John Mill, Model RM-15 GL, Type 572.15, closed design, 304 stainless steel. Chamber with stationary pins, rotor with fixed pins. 17.5 Liter (4.6 gallon) capacity, approximate 8-80 gallon per hour throughput. Driven by a 30 hp, 3/60/230/460 volt, 1170 rpm XP motor with manual vari-speed wheel. Include more info...

Used- Romaco Fryma Koruma Coball Annular Gap Bead Mill, Model MS 12.

Stock# 47320001

Used- Romaco Fryma Koruma Coball Annular Gap Bead Mill, Model MS 12. Capacity throughput 5-40 liters per hour. Chamber volume .498 liter, grinding beads volume minimum 0.149 liter, maximum 0.398 liter. Product chamber 316 stainless steel rated for 30 psi (2 bar) at 140 degrees F. Double jacketed rated for 15 psi (1 bar). Ceramic more info...

Used- Netzch Media Mill, Model LMC60 (E)

Stock# 40223002

Used- Netzch Media Mill, Model LMC60 (E). 57 liter chamber capacity.

Used- Netzch Media Mill, Model LMC60 (E)

Stock# 40223003

Used- Netzch Media Mill, Model LMC60 (E). 57 liter chamber capacity.

Used- WAB Horizontal Sand Mill "Dyno-Mill". Model KD-60.

Stock# 10147145

Used- WAB Horizontal Sand Mill "Dyno-Mill", Model KD-60. Material of construction: carbon steel. Capacity 15.8 gallons (60 litre). House sizes diameter 11.8" x 35.4" (300 x 900 mm). (1) Mechanical seal. (1) Jacket. (1) Motor with GW45 pump 59 hp (44 kW), 380/660 Volt (Ex). (1) Motor 1 hp (0.75 kW), 380 Volt (Ex), 50 Hz, with var more info...

Used- Stainless Steel Draisewerke Perl Mill, Model DCP-MEGAFLOW ACS-800/PUC

Stock# 42818001

Used- Draisewerke Perl Mill, Model DCP-MEGAFLOW ACS-800/PUC, Stainless Steel. Grinding vessel volume net- 62 Liters. Vessel rated 3 Bar (45 PSI) at 70 Degrees C. (158 Degrees F), jacket rated 3 Bar (45 PSI) at 40 Degrees C. (104 Degrees F). Hydraulic chamber raise, and lower with power pack. Double acting mechanical seal. Driven more info...

Used: Chicago Boiler vertical "Red Head" sand mill, model 30P

Stock# 79867

Used- Chicago Boiler Vertical "Red Head" Sand Mill, Model 30P, Carbon Steel. Open mill, continuous duty, approximate 16" diameter carbon steel jacketed tube. Driven by a 40hp, 3/60/208 volt, 1765 rp XP motor.

Fryma Coball Mill, Model MS-50. High performance annular gap bead mill for sub-micron milling. Capa...

 Fryma Coball Mill, Model MS-50. High performance annular gap bead mill for sub-micron milling. Capa...

Stock# 11059146

Used- Fryma Coball Mill, Model MS-50. High performance annular gap bead mill for sub-micron milling. Capacity: 4 m3/hr. Capacity size 3 gallon(11.4 liter). Capacity range approximately: 150-1000kg/hr. Product fineness approximately: 30 - <1um.

Gallons: Mfr: Fryma Model: MS-50 HP:
VIEW ITEM ADD TO CART

Netzsch Pilot Horizontal Media Mill, LMZ-05. Unit has stainless steel contact parts, and the rotor ...

 Netzsch Pilot Horizontal Media Mill, LMZ-05. Unit has stainless steel contact parts, and the rotor ...

Stock# 11690013

Used- Netzsch Pilot Horizontal Media Mill, LMZ-05. Unit has stainless steel contact parts, and the rotor is driven by a 5HP motor. Mill is fully prewired (3/60/230V) with all explosion proof electrics. Mill includes a variable speed feed pump. The volume of the grinding chamber. Mill is approximately 28" x 48" x 76" high, and it weighs approximately 2000 lbs. New 1995

Gallons: Mfr: Netzsch Model: LMZ-05 HP: 5
VIEW ITEM ADD TO CART

Used- Aimex Ultra Viscomill, Model UVM-5. 5 Liter working capacity (6.5 total)

Used- Aimex Ultra Viscomill, Model UVM-5. 5 Liter working capacity (6.5 total)

Stock# 48286003

Used- Aimex Ultra Viscomill, Model UVM-5. 5 Liter working capacity (6.5 total), processing capacity 13 to 80 liters per hour, 4.2 liter bead capacity. Vessel with SUS304 SS rectangular axis, hi-moler disk with pins, zirconia slit. Double mechanical seals on both main axis and slit sides. Driven by a 11Kw (14.75hp) main motor with 0.4Kw (0.5hp) slit motor 460V/60Hz. Class 1, Group D. Includes pressure gauge, thermometer with electric contacts, and a control panel with a Toshiba G7 drive, and an operator panel. Serial# 317010, built 2002.

Gallons: 1.32 Mfr: Aimex Model: UVM-5 HP: 15
VIEW ITEM ADD TO CART

Used- Netzsch Vertical Media John Mill, Model RM-15 GL

Used- Netzsch Vertical Media John Mill, Model RM-15 GL

Stock# 42598001

Used- Netzsch Vertical Media John Mill, Model RM-15 GL, Type 572.15, closed design, 304 stainless steel. Chamber with stationary pins, rotor with fixed pins. 17.5 Liter (4.6 gallon) capacity, approximate 8-80 gallon per hour throughput. Driven by a 30 hp, 3/60/230/460 volt, 1170 rpm XP motor with manual vari-speed wheel. Includes XP control panel. Bowl mounted on legs with casters.

Gallons: 4.6 Mfr: Netzsch Model: RM-15 HP: 30
VIEW ITEM ADD TO CART

Used- Romaco Fryma Koruma Coball Annular Gap Bead Mill, Model MS 12.

Used- Romaco Fryma Koruma Coball Annular Gap Bead Mill, Model MS 12.

Stock# 47320001

Used- Romaco Fryma Koruma Coball Annular Gap Bead Mill, Model MS 12. Capacity throughput 5-40 liters per hour. Chamber volume .498 liter, grinding beads volume minimum 0.149 liter, maximum 0.398 liter. Product chamber 316 stainless steel rated for 30 psi (2 bar) at 140 degrees F. Double jacketed rated for 15 psi (1 bar). Ceramic Rotor. Driven by a 5.5 kW (7.5 hp), 3/50/230/400 volt, 1440 rpm motor. Has (1) Delasco feed pump, 0.37 kW (0.5 hp), 3/50/230/400 volt, 1355 rpm motor, (1) Sealing liquid system with 0.18 kW (0.25 hp) pump, (1) 3 Liter product hopper. Has control panel with Siemens PLC and Danfuss VLT 5000 drive. Built 2007, Serial # 100966.

Gallons: 10.5 Mfr: Fryma Model: MS12 HP: 7.5
VIEW ITEM ADD TO CART

Used- Netzch Media Mill, Model LMC60 (E)

Used- Netzch Media Mill, Model LMC60 (E)

Stock# 40223002

Used- Netzch Media Mill, Model LMC60 (E). 57 liter chamber capacity.

Gallons: 15 Mfr: Netzsch Model: LMC60 HP: 50
VIEW ITEM ADD TO CART

Used- Netzch Media Mill, Model LMC60 (E)

Used- Netzch Media Mill, Model LMC60 (E)

Stock# 40223003

Used- Netzch Media Mill, Model LMC60 (E). 57 liter chamber capacity.

Gallons: 15 Mfr: Netzsch Model: LMC60 HP: 50
VIEW ITEM ADD TO CART

Used- WAB Horizontal Sand Mill "Dyno-Mill". Model KD-60.

Used- WAB Horizontal Sand Mill "Dyno-Mill". Model KD-60.

Stock# 10147145

Used- WAB Horizontal Sand Mill "Dyno-Mill", Model KD-60. Material of construction: carbon steel. Capacity 15.8 gallons (60 litre). House sizes diameter 11.8" x 35.4" (300 x 900 mm). (1) Mechanical seal. (1) Jacket. (1) Motor with GW45 pump 59 hp (44 kW), 380/660 Volt (Ex). (1) Motor 1 hp (0.75 kW), 380 Volt (Ex), 50 Hz, with variable speed drive. (1) Switch. Built 1990.

Gallons: 15.8 Mfr: WAB Model: KD-60 HP: 59
VIEW ITEM ADD TO CART

Used- Stainless Steel Draisewerke Perl Mill, Model DCP-MEGAFLOW ACS-800/PUC

Used- Stainless Steel Draisewerke Perl Mill, Model DCP-MEGAFLOW ACS-800/PUC

Stock# 42818001

Used- Draisewerke Perl Mill, Model DCP-MEGAFLOW ACS-800/PUC, Stainless Steel. Grinding vessel volume net- 62 Liters. Vessel rated 3 Bar (45 PSI) at 70 Degrees C. (158 Degrees F), jacket rated 3 Bar (45 PSI) at 40 Degrees C. (104 Degrees F). Hydraulic chamber raise, and lower with power pack. Double acting mechanical seal. Driven by a 300 HP, 3/60/460 Volt, 1190 RPM motor. Includes a control panel with an ABB drive. Built 2005.

Gallons: 16.3 Mfr: Draiswerke Model: DCP-MEGAFLOW ACS-800 PUC HP: 300
VIEW ITEM ADD TO CART

Used: Chicago Boiler vertical "Red Head" sand mill, model 30P

Used: Chicago Boiler vertical "Red Head" sand mill, model 30P

Stock# 79867

Used- Chicago Boiler Vertical "Red Head" Sand Mill, Model 30P, Carbon Steel. Open mill, continuous duty, approximate 16" diameter carbon steel jacketed tube. Driven by a 40hp, 3/60/208 volt, 1765 rp XP motor.

Gallons: 150 Mfr: Chicago Boiler Co. Model: 30P HP: 50
VIEW ITEM ADD TO CART
  • Fryma Coball Mill, Model MS-50. High performance annular gap bead mill for sub-micron milling. Capa...

    Used- Fryma Coball Mill, Model MS-50. High performance annular gap bead mill for sub-micron milling. Capacity: 4 m3/hr. Capacity size 3 gallon(11.4 liter). Capacity range approximately: 150-1000kg/hr. Product fineness approximately: 30 - <1um.

    VIEW ITEM Add to Cart
  • Netzsch Pilot Horizontal Media Mill, LMZ-05. Unit has stainless steel contact parts, and the rotor ...

    Used- Netzsch Pilot Horizontal Media Mill, LMZ-05. Unit has stainless steel contact parts, and the rotor is driven by a 5HP motor. Mill is fully prewired (3/60/230V) with all explosion proof electrics. Mill includes a variable speed feed pump. The volume of the grinding chamber. Mill is approximately 28" x 48" x 76" high, and it weighs approximately 2000 lbs. New 1995

    VIEW ITEM Add to Cart
  • Used- Aimex Ultra Viscomill, Model UVM-5. 5 Liter working capacity (6.5 total)

    Used- Aimex Ultra Viscomill, Model UVM-5. 5 Liter working capacity (6.5 total), processing capacity 13 to 80 liters per hour, 4.2 liter bead capacity. Vessel with SUS304 SS rectangular axis, hi-moler disk with pins, zirconia slit. Double mechanical seals on both main axis and slit sides. Driven by a 11Kw (14.75hp) main motor with 0.4Kw (0.5hp) slit motor 460V/60Hz. Class 1, Group D. Includes pressure gauge, thermometer with electric contacts, and a control panel with a Toshiba G7 drive, and an operator panel. Serial# 317010, built 2002.

    VIEW ITEM Add to Cart
  • Used- Netzsch Vertical Media John Mill, Model RM-15 GL

    Used- Netzsch Vertical Media John Mill, Model RM-15 GL, Type 572.15, closed design, 304 stainless steel. Chamber with stationary pins, rotor with fixed pins. 17.5 Liter (4.6 gallon) capacity, approximate 8-80 gallon per hour throughput. Driven by a 30 hp, 3/60/230/460 volt, 1170 rpm XP motor with manual vari-speed wheel. Includes XP control panel. Bowl mounted on legs with casters.

    VIEW ITEM Add to Cart
  • Used- Romaco Fryma Koruma Coball Annular Gap Bead Mill, Model MS 12.

    Used- Romaco Fryma Koruma Coball Annular Gap Bead Mill, Model MS 12. Capacity throughput 5-40 liters per hour. Chamber volume .498 liter, grinding beads volume minimum 0.149 liter, maximum 0.398 liter. Product chamber 316 stainless steel rated for 30 psi (2 bar) at 140 degrees F. Double jacketed rated for 15 psi (1 bar). Ceramic Rotor. Driven by a 5.5 kW (7.5 hp), 3/50/230/400 volt, 1440 rpm motor. Has (1) Delasco feed pump, 0.37 kW (0.5 hp), 3/50/230/400 volt, 1355 rpm motor, (1) Sealing liquid system with 0.18 kW (0.25 hp) pump, (1) 3 Liter product hopper. Has control panel with Siemens PLC and Danfuss VLT 5000 drive. Built 2007, Serial # 100966.

    VIEW ITEM Add to Cart
  • Used- Netzch Media Mill, Model LMC60 (E)

    Used- Netzch Media Mill, Model LMC60 (E). 57 liter chamber capacity.

    VIEW ITEM Add to Cart
  • Used- Netzch Media Mill, Model LMC60 (E)

    Used- Netzch Media Mill, Model LMC60 (E). 57 liter chamber capacity.

    VIEW ITEM Add to Cart
  • Used- WAB Horizontal Sand Mill "Dyno-Mill". Model KD-60.

    Used- WAB Horizontal Sand Mill "Dyno-Mill", Model KD-60. Material of construction: carbon steel. Capacity 15.8 gallons (60 litre). House sizes diameter 11.8" x 35.4" (300 x 900 mm). (1) Mechanical seal. (1) Jacket. (1) Motor with GW45 pump 59 hp (44 kW), 380/660 Volt (Ex). (1) Motor 1 hp (0.75 kW), 380 Volt (Ex), 50 Hz, with variable speed drive. (1) Switch. Built 1990.

    VIEW ITEM Add to Cart
  • Used- Stainless Steel Draisewerke Perl Mill, Model DCP-MEGAFLOW ACS-800/PUC

    Used- Draisewerke Perl Mill, Model DCP-MEGAFLOW ACS-800/PUC, Stainless Steel. Grinding vessel volume net- 62 Liters. Vessel rated 3 Bar (45 PSI) at 70 Degrees C. (158 Degrees F), jacket rated 3 Bar (45 PSI) at 40 Degrees C. (104 Degrees F). Hydraulic chamber raise, and lower with power pack. Double acting mechanical seal. Driven by a 300 HP, 3/60/460 Volt, 1190 RPM motor. Includes a control panel with an ABB drive. Built 2005.

    VIEW ITEM Add to Cart
  • Used: Chicago Boiler vertical "Red Head" sand mill, model 30P

    Used- Chicago Boiler Vertical "Red Head" Sand Mill, Model 30P, Carbon Steel. Open mill, continuous duty, approximate 16" diameter carbon steel jacketed tube. Driven by a 40hp, 3/60/208 volt, 1765 rp XP motor.

    VIEW ITEM Add to Cart
Cash Icon
Surplus Equipment?

We pay "Top Dollar" for your idle process equipment! Fill out our form and our buying team will get back to you.

SELL YOUR EQUIPMENT
Search Icon
Browse Inventory

View our entire process equipment inventory online or visit our location for an equipment inspection.

View Inventory
Phone Icon
Contact Us

Email or call us to speak with an equipment specialist to answer any machinery questions you may have.

630-350-2200